A comparison of modelled and real-life driving profiles for the simulation of railway vehicle operation

A key factor in determining the performance of a railway system is the speed profile of the trains within the network. There can be significant variation in this speed profile for identical trains on identical routes, depending on how the train is driven. A better understanding and control of speed profiles can therefore offer significant potential for improvements in the performance of railway systems. This paper develops a model to allow the variability of real-life driving profiles of railway vehicles to be quantitatively described and predicted, in order to better account for the effects on the speed profile of the train and hence the performance of the railway network as a whole. The model is validated against data from the Tyne and Wear Metro, and replicates the measured data to a good degree of accuracy.     

Traffic noise abatement: How different pavements, vehicle speeds and traffic densities affect annoyance levels

In this paper, annoyance ratings from traffic noise recorded on cobblestones, dense asphalt, and open asphalt rubber pavements are assessed with regard to car speeds and traffic densities. It was found that cobblestones pavements are the most annoying; also while open asphalt rubber pavement imposes less annoyance than dense asphalt it is not significantly different. Higher car speeds always lead to greater annoyance, as does higher traffic densities. LAeq and LAmax correlate well with annoyance, but loudness is the best predictor. Roughness and sharpness exhibit inconsistent interactions.     

Estimating the value of risk reductions for car drivers when pedestrians are involved: a case study in Spain

We estimated the benefits associated with reducing fatal and severe injuries from traffic accidents using a stated choice experiment where choice situations were generated through a statistically efficient design. Specifically, the risk variables were defined as the expected annual number of vehicle car-users that suffered their death or were severely injured in a traffic accident. In addition, and differing from previous research, the number of pedestrians that died or were severely injured in traffic accidents per year was also included as a risk attribute in the choice experiment, to attempt at measuring drivers’ willingness to pay to reduce the risk of hitting pedestrians in a crash. The empirical setting was a choice of route for a particular trip that a sample of car drivers periodically undertakes in Tenerife, Spain. Models were estimated accounting for random taste heterogeneity and pseudo-panel data correlation. The median of the distribution of simulated parameters was used to obtain a representative measure for the monetary valuation of risk reductions. We found that the ratio between the values of reducing the risk of suffering a serious injury and that of reducing a fatality was approximately 18 %. Further, and quite novel, we also found that the value of reducing a pedestrian fatality was 39 % of the value of reducing a car occupant fatality.     

不同冷却方式对大尺寸钢板感应加热成形的影响

为有效解决船用中厚钢板复杂曲面加工问题,研究空气冷却(空冷)、正面水冷和反面水冷方式对大尺寸钢板弯曲成形的影响因素。首先采用COMSOL Multiphysics仿真平台模拟电磁感应加热和冷却变形多物理场同步耦合过程,然后分析各种因素对大尺寸钢板弯曲成形的影响,最后通过试验验证有限元模型的可靠性,并对感应加热弯曲成形效果进行评估。结果表明:相对于水冷,空气冷却对钢板Y向位移改变效果显著;相对于空气冷却,水冷对钢板角位移的改变影响明显;当频率为50 k Hz时,电流频率对表面温度和角位移影响显著;当钢板长宽比不小于1∶2时,Y向位移的增加比较显著;当长宽比约为1∶1时,角位移的改变比较明显。     

Evaluating air emission inventories and indicators from cruise vessels at ports

This paper provides an estimation of air emissions (CO₂, NO_X, SO_X and PM) released by cruise vessels at the port level. The methodology is based on the “full bottom-up” approach and starts by evaluating the fuel consumed by each vessel on the basis of its individual port activities (manoeuvring, berthing and hoteling). The Port of Barcelona was selected as the site at which to perform the analysis, in which 125 calls of 30 cruise vessels were monitored. Real-time data from the automatic identification system (AIS), factor emissions from engine certificates and vessel characteristics from IHS Sea-web database were also collected for the analysis. The research findings show that the most appropriate indicators are inventory emissions per “port-time gross tonnage”, “port-time passenger” and “port time”. These emission indicators improve our understanding of cruise emissions and will facilitate the work that aims to estimate reliably and quickly the in-port ship emission inventories of cruise ports.     

On the numerical accuracy of the prediction of resistance coefficients in ship stern flow calculations

This article presents a study on the accuracy of the numerical determination of the friction and pressure resistance coefficients of ship hulls. The investigation was carried out for the KVLCC2 tanker at model- and full-scale Reynolds numbers. Gravity waves were neglected, i.e., we adopted the so-called double-model flow. Single-block grids with H–O topology were adopted for all the calculations. Three eddy viscosity models were employed: the one-equation eddy viscosity and the two-equation models proposed by Menter and the TNT version of the two-equation k-ω model. Verification exercises were performed in sets of nearly geometrically similar grids with different densities in the streamwise, normal, and girthwise directions. The friction and pressure resistance coefficients were calculated for different levels of the iterative error and for computational domains of different size. The results show that on the level of grid refinement used, it is possible to calculate the viscous resistance coefficients in H–O grids that do not match the ship contour with a numerical uncertainty of less than 1%. The differences between the predictions of different turbulence models were larger than the numerical uncertainty; however, these differences tended to decrease with increases in the Reynolds number. The pressure resistance was remarkably sensitive to domain size and far-field boundary conditions. Either a large domain or the application of a viscous–inviscid interaction procedure is needed for reliable results. This work was presented in part at the International Conference on Computational Methods in Marine Engineering—MARINE 2007, Barcelona, June 3–4, 2007.     

Community Perspectives Toward a Marine Reserve: A Case Study of San Felipe,Yucatán,México

San Felipe marine reserve, in Yucatán, México, is unique, and particularly suited for a case study because the local community created it without a mandate from higher levels of government. This article presents the results of a survey of local interest groups using the method of paired comparisons and rank correlation analysis, to reveal local judgments about the severity of damages to coastal habitats and the level of impacts of activities that cause the damages. The results show that fishers differ significantly from other interest groups in their rankings of the severity of damages to habitats and of impacting activities. These findings suggest that despite the overlapping interests in protecting the resources and the critical habitats, the different perspectives of local interest groups about the severity of damages must be considered in the management of San Felipe marine reserve.     

Improving maritime inventory routing: application to a Brazilian petroleum case

The crude oil offloading and supply problem (COSP) is a type of operation maritime inventory routing (MIR) problem encountered by petroleum companies. In COSP, the company not only is responsible for the ship scheduling to carry the crude oil from production sites to discharge ports but also must maintain inventory levels at both ports (production and consumption) between safety operational bounds to avoid disruptions in its crude oil production and/or refining processes. We show how to improve significantly the decision-making process in a Brazilian petroleum company using a mixed-integer linear programming (MILP) model to represent COSP. Comparison tests with a current ship-scheduling method adopted in the company indicated that the use of the MILP model increased the transportation efficiency and reduced costs by 20% on average. In addition to the quantitative gains, the use of a MILP model to solve COSP has succeeded when encountering real-life events, such as variation in production or consumption rates, berth unavailability, and changes in the storage capacities at ports.     

An assessment of port reform in Argentina: outcomes and challenges ahead

During the 1990s Argentina engaged in a process of restructuring and deregulation of its ports. The main objective of the reform was to increase efficiency and service quality and to reduce the size and role of the public sector in ports. Overall, it was expected to allow the transport sector to adjust its capacity to demand changes and to facilitate international trade while contributing to the reduction of the fiscal burden of this sector. This paper shows that the reform caused significant efficiency gains, allowing a 50% drop in container terminal handling price within five years in the most important ports. The paper also identifies outstanding issues that could impact the long-run sustainability of the gains achieved. Among these issues, emphasis is given to recent horizontal and vertical mergers in the Port of Buenos Aires and their consequences in terms of actual competition and access regulation.     

A survey of Hungarian transport policy

Abstract

In its introductory part this article discusses the principles of the transport policy approved in 1968, followed by the reasons behind the advances on this policy approved in 1978.

It then goes on to review the Hungarian transport pattern and organization, including the roles played by the railways, the road transport companies, the state‐owned enterprises as well as cooperatives, urban transport, shipping, air transport, pipelines, and private transport.

In discussing the division of labour (or market sharing) in transport it concludes that passenger transport is increasing slowly, while the proportion of private transport is continuing to rise. A moderate increase is expected in goods transport with a decline in the share of the railways and a rise in that of the other transport branches. This division of labour is being influenced by economic, not administrative, means.

The main target of the advanced transport policy is to shape a transport system which corresponds to socioeconomic requirements. This means that goods transport capacities must be put to more efficient use, which involves improving development, organizational and planning operations. In passenger transport priority must go to public transport while the proportion of private transport must be defined in keeping with demand and economic possibilities.

In the development of the infrastructure and investments, the need to improve energy use and protect the environment must be stressed.

The rest of the article presents the detailed reasoning behind the measures already taken and scheduled to be taken to achieve these main targets.