管推进工程管线与土壤互制行为之分析研究

本研究主要是针对非明挖工法中之管推进工法,以有限元素法来仿真分析管推进工程中的相关问题,并且加入了管材与土体表面之间的接触性质来探讨管推进工程中管材与土体的互制行为.本次数值分析包含了物理模型试验与曲线推进工程等两种数值分析模型.在物理模型的数值分析中,考虑开挖面超挖与挤压的两种状况,并且与实验量测数据做比较.而在曲线推进的数值分析中,则建立一般土层中在外侧土体地盘改良前后的两种情况来互相比较,观察改良前后推进过程中观察土体的应力分布情况和地表沉陷量变化,期能将结果回馈到真实的工程设计之上.     

A Tool for Coastal Setbacks Demarcation over Rough,Impermeable Shores: The Test Case of Kavala Coastline (Northern Greece)

Although setback zones and lines are considered as a powerful coastal zone management tool ensuring public access, protecting the coastal ecosystem and minimizing natural hazards over developments, the lack of a solid and objective Mediterranean methodological framework for coastal setbacks demarcation appears profound. Especially for countries like Greece, this deficiency leads to long legal disputes encouraging illegal construction on the coastline. In this article a methodology on coastal setbacks demarcation over rocky, impermeable shores is proposed, followed, and implemented along a Greek shoreline, serving as a pilot case study. The methodology is consistent with the requirements of the integrated coastal zone management (ICZM) Protocol and the Greek legislation (L. 2971/2001), aiming to determine the “highest winter waterline,” accounting for the tidal and storm surge effects, the sea-level rise due to climate change impact, the extreme offshore wind and wave analysis, and the maximum potential wave run-up. Such a tool may bridge the gap between legislative provisions and actual ICZM Protocol implementation improving regional coastal management and planning.     

PPARγ及其辅激活子MED1重组腺病毒的制备与生物学功能分析

目的制备大量PPARγ与MED1腺病毒,探讨其生物学功能。方法以实验室现有的腺病毒原液为材料,用HEK293a细胞包装腺病毒,CsCl梯度离心法纯化病毒,A260法测定病毒颗粒,并通过细胞感染、小鼠活体尾静脉注射病毒等实验,用HE染色法、Real-time PCR及免疫组化法进一步鉴定病毒的生物学功能。结果获得Ad/LacZ、Ad/PPARγ和Ad/MED1,其浓度分别为2.51×1012、1.57×1012、2.59×1012 VP/mL。C57BL/6J小鼠经尾静脉注射Ad/PPARγ,小鼠出现脂肪肝,肝细胞聚集大量脂滴,且PPARγmRNA和蛋白表达显著增加。同样,用Ad/MED1感染3T3-L1细胞或给小鼠尾静脉注射Ad/MED1,MED1表达水平都显著升高。结论Ad/PPARγ、Ad/MED1及对照Ad/LacZ成功制备,为体外细胞病毒感染以及活体研究PPARγ与MED1的基因功能以及网络调控奠定了实验基础。     

Constructing Time‐Scaled Maps: Switzerland from 1950 to 2000†

Abstract

The article discusses the construction of a time‐scaled maps series for Switzerland documenting the shrinking of the country since 1950. It describes underlying network models and the mathematical approach employed for the necessary rescaling. In conclusion, it presents the maps and discusses how the country was shrunk by half.     

Challenges in Managing Empty Container Movements at Multiple Planning Levels

Empty container management deals with repositioning empty containers at minimum costs while fulfilling empty container demands. Due to imbalances in trade, some areas have a surplus of empty containers, while others have a shortage. Therefore, empty containers need to be repositioned globally to make sure that sufficient empty containers are available everywhere. Besides, empty containers need to be repositioned regionally between shippers, consignees, inland depots, terminals and ports in order to fulfil demand. In this paper, the focus is on the empty container management problem at a regional level. The problem is described in detail and opportunities for reducing empty container movements are discussed. Decisions to be taken at each planning level (strategic, tactical and operational) are described, and for each planning level, a detailed overview of planning models proposed in the literature is presented. Planning models considering decisions at several planning levels are discussed as well. Finally, interesting opportunities for future research are identified.     

Collaborative Logistics from the Perspective of Road Transportation Companies

ABSTRACT

To survive under the ever increasing competitive and global pressures to operate more efficiently, transportation companies are obliged to adopt a collaborative focus. Various types of cooperative supply chain relationships have been discussed in both professional and academic literature over the last decades. However, research on horizontal cooperation in logistics remains scarce and scattered across various research domains. Companies operating at the same level of the supply chain and performing comparable logistics functions may cooperate horizontally to increase their productivity, improve their service level and enhance their market position. In this paper, the focus is on the operational planning of horizontal cooperations between road transportation carriers. Following a scientific literature review, a distinction may be made between two operational approaches to horizontal logistics collaboration: order sharing and capacity sharing. For both research streams, a detailed overview of solution techniques proposed in literature is presented. Moreover, some interesting opportunities for future research are identified.     

Sheet metal forming simulation considering die deformation

Due to environmental concerns and safety regulations in the automotive industry, the development of strong and lightweight cars has been a hot issue in the last decade. One solution for this purpose would be to use high-strength steel (HSS) and advanced high-strength steel (AHSS). These materials can make the car lighter while maintaining the crash resistance of the vehicle. HSS and AHSS have more resistance force in the die structure compared with conventional steel due to their higher yield and tensile strength and thus, these materials have a greater effect on die deformation during the sheet metal forming process. As a result, die deformation can affect the blank sheet’s drawn pattern, strain, and stress as well as springback. This study presents a sheet metal forming simulation that considers die deformation. The simulation process was compared with conventional simulation methods. Our results indicate that the sheet metal forming simulation with die deformation consideration provides useful information on the die structure as well as formability and springback.     

Fuel consumption parameters for realizing and verifying fuel consumption prospect algorithm of vehicle driving route information system

Emissions of CO₂, as the main component of greenhouse gases, and high fuel consumption rates are worldwide problems. To solve them, most car manufacturers have concentrated on developing various techniques to improve the efficiencies of engines and transmissions and ECO-ROUTEs to meet environmental regulations. In this study, an algorithm for determining routes that cause the least fuel consumption was developed. The core of this algorithm is a specific EEC (energy efficiency constant) map containing logic that is able to predict fuel consumption. The accuracy of the algorithm was confirmed by vehicle tests for various driving patterns. Parameters affecting vehicle fuel economy were studied and verified. Improvement in the accuracy of this algorithm was confirmed by applying these parameters to ECO-ROUTE logic.     

Gate shape optimization using design of experiment to reduce the shear rate around the gate

Numerical analysis is used to optimize the gate shape of the mold part in the molding process. The objective of this research was to develop a procedure that will optimize the gate shape of the mold part by using Design of Experiments approach. The computer-aided engineering software Moldflow was used to simulate the plastic injection molding process and the Minitab software was used to analyze the computational results from Moldflow. The Bulk Molding Compounds (BMC) UNI-203S thermoset material was chosen as the molding material. Four different types of gate shapes were analyzed to find the gate shape to be used in the optimization. The Type 3 gate shape was selected as basis for the gate optimization because this shape yielded the minimum shear rate around the gate among all. The thickness, width, length and angle of the gate were selected as the design variables. Erosion around a gate due to repetitive shear flow during molding process was considered as an important issue to extend the service life of the expensive mold. It is normally very difficult to prevent erosion due to high injection pressure and repetitive use of the mold, especially in certain molding parts as BMC reflector in automotive parts, so it has become the subject of researches. The effectiveness of design variables was evaluated by observing shear rate around the gate. The objective of the optimization was to minimize the average shear rate around the gate. Response Surface Method was applied to identify the optimum values of the design variables. The computed optimum values were validated numerically. The optimized gate shape showed the reduced shear rate by about 11%.     

Predicting auto-ignition characteristics of RCCI combustion using a multi-zone model

The objective of new combustion concepts is to meet emission standards by improving fuel air mixing prior to ignition. Since there is no overlap between injection and ignition, combustion is governed mainly by chemical kinetics and it is challenging to control the phasing of ignition. Reactivity Controlled Compression Ignition (RCCI) combustion aims to control combustion phasing by altering the fuel ratios of the high- and low octane fuel and injection timings. In this study the dual fuel blend is prepared with gasoline and diesel fuels. The applied injection timings of the diesel are very early (90 to 60° CA bTDC). In the detailed reaction mechanism, n-heptane and iso-octane represent diesel and gasoline fuel, respectively. A multi-zone model approach is implemented to perform RCCI combustion simulation. Ignition characteristics are analyzed by using CA50 as the main parameter. In the experiments for the early direct injection (DI) timing advancing the injection time results in a later ignition. Qualitatively, the trend effect of the diesel injection timing and the effect of the ratio gasoline/diesel are captured accurately by the multi-zone model.