Finite element analysis of overlay incorporating stress absorbing membrane interlayers against reflective cracking

A wheel tracking test was modelled to gain better understanding of the deflection and stress-strain distribution in an overlaid cracked pavements with and without membrane interlayer （SAMI）. For this purpose, commercial finite element software Abaqus 6.7-1 was used. Two different models were considered, one incorporating stress absorbing membrane interlayers （SAMIs） and the other without SAMI. In the study, full bond condition was assumed for the boundaries between the layers, and a linear elastic model was used for the analysis. The results show that introduction of SAMI caused greater deflection of the pavement. It is found that although with SAMIs, low stiffness is required, a very low stiffness may yield undesirable results. The results show that the introduction of SAMIs results in high strain concentration around the crack region, whilst the strain in the overlay is smaller than the values predicted in the models without SAMIs.     

温拌技术的发展与现状

该文介绍了温拌沥青技术的发展与现状,有关经验可供专业人员参考。     

Fuel economy comparison of conventional drive trains series and parallel hybrid electric step vans

A hybrid electric vehicle (HEV) is a vehicle that combines a conventional propulsion system with an on-board rechargeable energy storage system to achieve better fuel economy than a conventional vehicle HEVs do not have limited ranges like battery electric vehicles, which use batteries charged by an external source. The different propulsion power systems may have common subsystems or components. The objective of this study is to compare the fuel economies of a conventional step van, a series hybrid electric step van (HESV), and a parallel HESV by calculating the fuel consumption using the ADVISOR software by NREL. We also showed the results of the vehicles in different driving cycles including the Central Business District bus cycles, the New York City Cycle, and the US EPA City and Highway cycles.     

Experimental studies on low pressure semi-direct fuel injection in a two stroke spark ignition engine

In this work a two-stroke scooter engine was modified to work with semi-direct injection of gasoline at a pressure of 8 bar from an injector in the cylinder barrel pointed toward the cylinder head. The influence of injection timing, injection pressure, spark plug location and air-fuel ratio, on performance, emissions and combustion characteristics has been investigated. In addition, a comparison has been made with manifold injection of gasoline on the same engine at a given speed and various outputs. A significant reduction in HC emissions and fuel consumption with no adverse effects on NOx emissions and combustion stability was observed. A small drop in power and increase in CO emission were observed disadvantages of the new injection system. Injection timing was found to be the most important factor and a balance between reduction in shortcircuited fuel by late injection, and time for mixture preparation by advancing the injection, was found to be essential.     

Discussing the “positive utilities” of autonomous vehicles: will travellers really use their time productively?

ABSTRACT

Autonomous vehicles (AVs) are expected to reshape travel behaviour and demand in part by enabling productive uses of travel time—a primary component of the “positive utility of travel” concept—thus reducing subjective values of travel time savings (VOT). Many studies from industry and academia have assumed significant increases in travel time use and reductions in VOT for AVs. In this position paper, I argue that AVs’ VOT impacts may be more modest than anticipated and derive from a different source. Vehicle designs and operations may limit activity engagement during travel, with AV users feeling more like car passengers than train riders. Furthermore, shared AVs may attenuate travel time use benefits, and productivity gains could be limited to long-distance trips. Although AV riders will likely have greater activity participation during travel, many in-vehicle activities today may be more about coping with commuting burdens than productively using travel time. Instead, VOT reductions may be more likely to arise from a different “positive utility”—subjective well-being improvements through reduced stresses of driving or the ability to relax and mentally transition. Given high uncertainty, further empirical research on the experiential, time use, and VOT impacts of AVs is needed.     

Rising Sea Levels: Helping Decision-Makers Confront the Inevitable

Sea-level rise (SLR) is not just a future trend; it is occurring now in most coastal regions across the globe. It thus impacts not only long-range planning in coastal environments, but also emergency preparedness. Its inevitability and irreversibility on long time scales, in addition to its spatial non-uniformity, uncertain magnitude and timing, and capacity to drive non-stationarity in coastal flooding on planning and engineering timescales, create unique challenges for coastal risk-management decision processes. This review assesses past United States federal efforts to synthesize evolving SLR science in support of coastal risk management. In particular, it outlines the: (1) evolution in global SLR scenarios to those using a risk-based perspective that also considers low-probability but high-consequence outcomes, (2) regionalization of the global scenarios, and (3) use of probabilistic approaches. It also describes efforts to further contextualize regional scenarios by combining local mean sea-level changes with extreme water level projections. Finally, it offers perspectives on key issues relevant to the future uptake, interpretation, and application of sea-level change scenarios in decision-making. These perspectives have utility for efforts to craft standards and guidance for preparedness and resilience measures to reduce the risk of coastal flooding and other impacts related to SLR.     

Short run fare elasticities for Bogotá’s BRT system: ridership responses to fare increases

Transportation - The fare policy of the BRT system in Bogotá, in order to cover its operating costs, has consisted of steadily fare increases, since its creation until 2012. To date, no study...     

A study of jack-up leg drag coefficients

The accurate prediction of drag coefficients for truss-type jack-up legs is an important part of a unit's design. Over the past 14 years, a series of windtunnel tests have been conducted on both square and triangular cross-section leg configurations. A calculation method which closely fits the model test data has also been adopted. A previous paper described the early testing and the MMEC calculation method for square legs. Since then, testing and research have continued on both square and triangular leg designs. This paper describes the more recent testing performed on square legs, and it details the testing and the MMEC method for triangular legs. In addition, the effects of cornerpost design and surface roughness are discussed. Several example calculations are provided in Appendices.     

Fleet deployment optimization for liner shipping: an integer programming model

Extending and improving an earlier work of the second author, an Integer Programming (IP) model is developed to minimize the operating and lay-up costs for a fleet of liner ships operating on various routes. The IP model determines the optimal deployment of an existing fleet, given route, service, charter, and compatibility constraints. Two examples are worked with extensive actual data provided by Flota Mercante Grancolombiana (FMG). The optimal deployment is solved for their existing ship and service requirements and results and conclusions are given.