Computational and experimental investigation of the unsteady flow structures around automotive outside rear-view mirrors

The unsteady flow field around two automotive outside rear-view mirrors is investigated. This study includes comprehensive experimental and computational approaches in order to characterize the complex flow structures in the wake of the mirrors. The experiments were carried out in a wind tunnel which included the measurements of the instantaneous and averaged velocity fields as well as mean and unsteady surface pressure distributions. The simulations were performed using Large Eddy Simulation (LES). The LES approach (particularly with the dynamic subgrid viscosity model) provided good agreements with the experiments for the velocity and the surface pressure distributions. The experimental and the computational results of this study will be used as a benchmark to validate the current and the future CFD development and the subsequent aero-acoustic computations.     

A study of the environmental impacts of intelligent automated vehicle control at intersections via V2V and V2I communications

This article presents a novel intersection traffic management system for automated vehicles and quantifies its impact on fuel consumption and greenhouse gas emissions of CO₂ relative to traditional traffic signal and roundabout intersection control. The developed intelligent traffic management (ITM) techniques, which are based on a spatiotemporal reservation scheme, ensure that vehicles proceed through the intersection without colliding with other vehicles while at the same time reducing the intersection delay and environmental impacts. Specifically, the spatiotemporal reservation scheme provides each vehicle a collision-free path that is decomposed into a speed profile along with navigational instructions. The integration of the developed microscopic traffic simulator with instantaneous emission model, provides improved assessments of the environmental impact of traffic control strategies at intersections. The simulator architecture integrates several ITM algorithms, vehicle sensors, V2V/V2I communications, and emission and fuel consumption models. Each vehicle is modeled by an agent and each agent provides information depending on the specific vehicle sensors. The ITM system is supported by V2V and V2I communications, allowing the exchange of information among vehicles and infrastructure. The data include the estimated vehicle position and speed. Compared with traditional traffic management techniques, the simulation results prove that the proposed ITM system reduces CO₂ emissions significantly. The research also shows that these reductions are more significant when the traffic flow increases.     

怎样卖掉你的车

在汽车消费发达的国家，二手车消费是整个汽车消费的重要组成部分。甚至可以说，科学、合理、完善的二手车消费体制带动了整个汽车消费的发展。在今天的中国，汽车越来越多地进入了家庭，准备置换手中旧车的人也越来越多，所以《爱车》特别邀请美国二手车销售专家M.Brueggemann先生为中国的车主朋友奉献一篇精彩的文章，虽然本文充满美国社会的气息，很多技巧不能直接套用，但是先进的经验是绝对值得借鉴的。[编者按]     

Dual extended Kalman filter for vehicle state and parameter estimation

The article demonstrates the implementation of a model-based vehicle estimator, which can be used for combined estimation of vehicle states and parameters. The estimator is realised using the dual extended Kalman filter (DEKF) technique, which makes use of two Kalman filters running in parallel, thus 'splitting' the state and parameter estimation problems. Note that the two problems cannot be entirely separated due to their inherent interdependencies. This technique provides several advantages, such as the possibility to switch off the parameter estimator, once a sufficiently good set of estimates has been obtained. The estimator is based on a four-wheel vehicle model with four degrees of freedom, which accommodates the dominant modes only, and is designed to make use of several interchangeable tyre models. The paper demonstrates the appropriateness of the DEKF. Results to date indicate that this is an effective approach, which is considered to be of potential benefit to the automotive industry.     

Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

Silicon dynamics in the Oder estuary, Baltic Sea

Studies on dissolved silicate (DSi) and biogenic silica (BSi) dynamics were carried out in the Oder estuary, Baltic Sea in 2000–2005. The Oder estuary proved to be an important component of the Oder River–Baltic Sea continuum where very intensive seasonal DSi uptake during spring and autumn, but also BSi regeneration during summer take place. Owing to the regeneration process annual DSi patterns in the river and the estuary distinctly differed; the annual patterns of DSi in the estuary showed two maxima and two minima in contrast to one maximum- and one minimum-pattern in the Oder River. DSi concentrations in the river and in the estuary were highest in winter (200–250 μmol dm^− 3) and lowest (often less than 1 μmol dm^− 3) in spring, concomitant with diatom growth; such low values are known to be limiting for new diatom growth. Secondary DSi summer peaks at the estuary exit exceeded 100 μmol dm^− 3, and these maxima were followed by autumn minima coinciding with the autumn diatom bloom. Seasonal peaks in BSi concentrations (ca. 100 μmol dm^− 3) occurred during the spring diatom bloom in the Oder River. Mass balance calculations of DSi and BSi showed that DSi + BSi import to the estuary over a two year period was 103.2 kt and that can be compared with the DSi export of 98.5 kt. The difference between these numbers gives room for ca. 2.5 kt BSi to be annually exported to the Baltic Sea. Sediment cores studies point to BSi annual accumulation on the level of 2.5 kt BSi. BSi import to the estuary is on the level of ca. 10.5 kt, thus ca. 5 kt of BSi is annually converted into the DSi, increasing the pool of DSi that leaves the system. BSi concentrations being ca. 2 times higher at the estuary entrance than at its exit remain in a good agreement with the DSi and BSi budgeting presented in the paper.     

Global supply chain and port/terminal: integration and competitiveness

Much has been said of the importance of port and terminal integration in the supply chain. Authors have stressed the importance of agility to the port environment, which involves being proactive along supply chains, facilitation of intermodal integration, as well as organizational integration and partnership between ports and users. Despite the well articulated importance of the issues, little has been offered in terms of conceptualizations and empirical evidence of what really is meant by port/terminal integration in the supply chain, how such integration can be measured and quantified as well as the extent to which different ports/terminals in the world are integrated in the supply chain and competitive performance implications arising thereof. This paper aims to make a contribution in this respect by (i) reviewing the relevant literature on supply chain integration and port integration in the supply chain, (ii) conceptualizing measures for port/terminal integration in the supply chain, (iii) empirically testing the influence of port/terminal integration in the supply chain on port competitiveness and (iv) outlining the significance and value of the study for port operators, shipping lines, transport providers and for further research.