Hydroelastic slamming

An overview of the many water-impact (slamming) problems in ship and ocean engineering is given. Theoretical and experimental drop tests of horizontal and nearly horizontal elastic plates are reviewed. It is shown that maximum pressure cannot be used to estimate maximum slamming-induced stresses when maximum pressure is large, because dynamic hydroelastic effects then become important. Further, the significance of hydroelasticity increases with decreasing dead-rise angle, increasing impact velocity, and increasing the value of the highest local natural period of the structure. It is emphasized that the slamming problem must be hydrodynamically studied from a structural point of view. Comparisons between theory and full-scale measurements of slamming-induced local strains in the wet-deck of a catamaran are presented. The importance of the rigid body vertical accelerations and the influence of the side-hulls on the impact velocity are pointed out. Received: October 4, 2000     

Transport of radionuclides by sea-ice and dense-water formed in western Kara Sea flaw leads

A transport assessment of particle-bound and dissolved artificial radionuclides (¹³⁷Cs and ^239,240Pu) by sea-ice and dense-water formed in western Kara Sea flaw leads close to the Novaya Zemlya dumping sites is presented in this study. We both performed a “best estimate” based on available data, and a “maximum assessment” relying on simulated constant releases of 1 TBq ¹³⁷Cs and ^239,240Pu from individual dumping bays. The estimates are based on a combination of (i) the content of particulate matter in sea-ice; (ii) analytical data and numerical simulations of radionuclide concentrations in shelf surface deposits, suspended particulate matter (SPM), and the dissolved phase; and (iii) estimates of lead-ice and dense-water formation rates as well as modeling results of local ice drift pathways. In the “best estimate” case, 2.90 GBq ¹³⁷Cs and 0.51 GBq ^239,240Pu attached to sea-ice sediments can be exported from the lead areas toward the central Arctic basin. The radionuclide burden of the annually formed dense lead water in the “best estimate” amounts to 4.68 TBq ¹³⁷Cs and 0.014 TBq ^239,240Pu. In the “maximum assessment”, potential export-rates of ice-particle bound ¹³⁷Cs and ^239,240Pu toward the central Arctic would amount to 0.64 and 0.16 TBq, respectively. As much as ≈900 TBq ¹³⁷Cs and ≈6.75 TBq ^239,240Pu could be annually taken up by 34.75 dense-water rejected in the lead area. Assuming the (unlikely) instantaneous release of the total ¹³⁷Cs and ^239,240Pu inventories (≈1 PBq and 10 TBq, respectively) from the Novaya Zemlya dumping sites into the dissolved phase, the dense lead water locally formed during one winter season could take up ≈90% of the Cs and ≈68% of the Pu released.     

Characteristics and calculation method of sound radiation of cylindrical shell with porous sound-absorbing material under acoustic excitation北大核心CSCD

［Objective］This paper aims to study the characteristics and calculation method of the vibration and sound radiation of single ring-stiffened cylindrical shells with porous fiber composite materials installed in the inner wall under acoustic excitation. ［Method ］ Based on the equivalent fluid theory model of Johnson–Champoux–Allard (JCA) and the transfer matrix of the multilayer medium, a theoretical formula of the sound absorption coefficient of multilayer sound absorption structures is derived. The three methods for calculating the vibration and sound radiation of a single ring-stiffened cylindrical shell with porous fiber materials under acoustic excitation, namely acoustic solid modeling of porous media, finite element model combined with theoretical formula and imposition of impedance boundary on sound absorption coefficient, are then verified and compared. Finally, the influences of sound-absorbing material's thickness, backed-air gap, static flow resistance, and material arrangement order on the acoustic absorption performance of the cylindrical shell are investigated. ［Results］The results show that laying porous fiber composite materials on the cylindrical shell internally can reduce the vibration and acoustic radiation of cylindrical shell structure. The sound absorption coefficient curve can quickly and effectively predict the resulting trend of the vibration and sound radiation of the cylindrical shell. ［Conclusion］The acoustic absorption performance of sound absorption structures can be effectively improved through the rational design of their properties and arrangement order of the sound-absorbing materials in order to achieve the purpose of vibration and noise reduction. © 2023 Chinese Journal of Ship Research. All rights reserved.     

1/32° real-time global ocean prediction and value-added over 1/16° resolution

A 1/32° global ocean nowcast/forecast system has been developed by the Naval Research Laboratory at the Stennis Space Center. It started running at the Naval Oceanographic Office in near real-time on 1 Nov. 2003 and has been running daily in real-time since 1 Mar. 2005. It became an operational system on 6 March 2006, replacing the existing 1/16° system which ceased operation on 12 March 2006. Both systems use the NRL Layered Ocean Model (NLOM) with assimilation of sea surface height from satellite altimeters and sea surface temperature from multi-channel satellite infrared radiometers. Real-time and archived results are available online at http://www.ocean.nrlssc.navy.mil/global_nlom. The 1/32° system has improvements over the earlier system that can be grouped into two categories: (1) better resolution and representation of dynamical processes and (2) design modifications. The design modifications are the result of accrued knowledge since the development of the earlier 1/16° system. The improved horizontal resolution of the 1/32° system has significant dynamical benefits which increase the ability of the model to accurately nowcast and skillfully forecast. At the finer resolution, current pathways and their transports become more accurate, the sea surface height (SSH) variability increases and becomes more realistic and even the global ocean circulation experiences some changes (including inter-basin exchange). These improvements make the 1/32° system a better dynamical interpolator of assimilated satellite altimeter track data, using a one-day model forecast as the first guess. The result is quantitatively more accurate nowcasts, as is illustrated by several model-data comparisons. Based on comparisons with ocean color imagery in the northwestern Arabian Sea and the Gulf of Oman, the 1/32° system has even demonstrated the ability to map small eddies, 25–75 km in diameter, with 70% reliability and a median eddy center location error of 22.5 km, a surprising and unanticipated result from assimilation of altimeter track data. For all of the eddies (50% small eddies), the reliability was 80% and the median eddy center location error was 29 km. The 1/32° system also exhibits improved forecast skill in relation to the 1/16° system. This is due to (a) a more accurate initial condition for the forecast and (b) better resolution and representation of critical dynamical processes (such as upper ocean – topographic coupling via mesoscale flow instabilities) which allow the model to more accurately evolve these features in time while running in forecast mode (forecast atmospheric forcing for the first 5 days, then gradually reverting toward climatology for the remainder of the 30-day forecast period). At 1/32° resolution, forecast SSH generally compares better with unassimilated observations and the anomaly correlation of the forecast SSH exceeds that from persistence by a larger amount than found in the 1/16° system.     

Port and jetty location for small-scale inter-island short-sea shipping: the warehouse approach

Port investments are generally analysed one project at a time, often within a set of relevant scenario alternatives. Sometimes the issue consists in assessing a combination of complementary projects at different locations, such as may be the case in addressing the feasibility of comprehensive jetty programmes in inter-island shipping. These alternatives can be evaluated by the so-called 'warehouse approach' of business logistics, as is exemplified in the present exercise.     

Development and Evaluation of Vehicle Simulation Models for a 4WS Application

In the scope of the European Prometheus project a passenger car with active rear wheel steering was developed by TNO in cooperation with PSA. During development and engineering of the rear wheel steering system simulation tools have been used to reduce development costs. This paper describes the evaluation of different simulation models, from simple to complex, with results of full vehicle driving tests. The optimal balance for model complexity and accuracy was achieved with a 2-dimensional model with an added roll degree of freedom. The results show that validation using time responses can give ambiguous and inaccurate results, and that frequency response functions are much more usable in validation.     

Development of a differential route share model for railroad freight traffic

This paper summarizes work undertaken towards development and calibration of a model to predict the distribution of rail freight traffic among competing routes. The model is designed for use in analyzing the traffic effects of changes in the level-of-service on selected rail lines. The model predicts route shares based on the overall network configuration of each railroad participating in a given market. The model selects feasible routes, discards those routes which appear to be too circuitous or costly, and then assigns traffic to the remaining routes in accordance with several network characteristics. It is designed to be sensitive to level-of-service changes, and to simulate the response of shippers and railroads to a competitive environment. A multiple route-finding algorithm was used to find possible routes based on the number of railroads operating at the originating and terminating end of a market. Multiple routes were determined and matched with observed traffic flows from the ICC One-Percent Waybill Sample. Physical network characteristics for each route, including distance, junction frequency, and “impedance,” were calculated from the network model and were correlated with the traffic share observed on each route in the market. A two-stage model was developed to find feasible routes from the set of possible routes and to allocate traffic to feasible routes based on levels-of-service. The model was calibrated on 9,793 routes from 1,199 markets with twenty or more carloads from the 1977 One-Percent Carload Waybill Sample. Model calibration supported the hypothesis that network route characteristics did indeed influence shipper choice of route, and that a normative model could be used to assess relative attractiveness of routes under various railroad corporate ownership restructuring scenarios.     

Is DOC the main source of organic matter remineralization in the ocean water column?

Recent interpretations of carbon flux data and deep-sea processes have led to a reconsideration of the role of dissolved organic carbon (DOC) in supporting water column remineralization and other mid-water biogeochemical transformations (Suzuki et al., 1985; Cho and Azam, 1988; Karl et al., 1988; Christensen et al., 1989; Naqvi and Shailaja, 1993). To date, there have been no direct comparisons of particulate carbon flux data with water column metabolic rates. Here, for the first time, particulate carbon flux and respiratory electron transport activity (from which metabolic CO₂ production is derived), have been monitored simultaneously for one year in the same area of the northwestern Mediterranean Sea. In the aphotic layer (200–1000 m), particulate organic carbon (POC) can support only 20% of the overall organic matter remineralization. Remineralization rates are consistent with recent calculations of DOC exported from the euphotic layer in this area, confirming the vital importance of DOC in maintaining deep-water metabolism. This finding would apply to other regions of mesotrophic and oligotrophic production and thus affect our understanding of carbon recycling in the water column, new production and O₂ utilization.     

A study of the dynamic response of submerged rectangular flat plates

The dynamic response of flat horizontal plates vibrating in air and under water has been investigated experimentally and analytically. The effect of the boundary conditions and the depth of submergence of the plates has been studied. Excellent agreement was obtained between the analytical solution and the experimental results. An approximate expression for the evaluation of the modal added masses for rectangular plates has been derived. This can be used to estimate the natural frequencies of plating constituting the internal structure within the cargo spaces in tankers and liquid cargo carriers.