J. M. Lee  N. W. Sung  G. B. Cho  K. O. Oh 《International Journal of Automotive Technology》2010,11(3):307-316

An analytical study of the performance of a radial-type, metal foam diesel particulate filter is reported. A mathematical model for the filtration and regeneration of soot in a metal foam filter was developed. Nickel foam was selected for the filter medium due to its large specific area, high porosity, and high thermal resistance. For various metal foams, the filtration efficiency and the pressure drop through the filter were calculated, as was the deposition of soot. The results from the analytical model were compared with experimental data. In comparison with a conventional wall flow filter, the metal foam diesel particulate filter (DPF) is effective in utilizing the volume of material, due to the porous structures. As the size of the metal foam pores in the DPF increases from 580 μm to 800 μm, the filtration efficiency decreases from 90% to 50%, and the pressure drop decreases from 380 mbar to 20 mbar. The metal foam DPF with a large pore size is effective in utilizing the volume of material with a small pressure drop. The regeneration is completed within four minutes by the flow of hot exhaust gases under full load conditions.  相似文献   

    

J. Gonzalez  C. Rodriguez  J. Blanquer  J. M. Mera  E. Castellote  R. Santos 《先进运输杂志》2010,44(2):53-71

The signalling system affects the type of service that can be provided on any particular railway line. The aims set when it comes to designing these systems to operate a railway line are: to ensure safety of operation and to ensure flexible and efficient running. When building a line capacity optimisation algorithm, it must reach a compromise solution between two parameters: minimise the interval between trains and keep journey time as low as possible. This paper aims to describe the algorithm developed between METRO DE MADRID and CITEF (Railway Technology Research Centre of the Universidad Politécnica de Madrid – UPM) that allows the capacity of an underground line equipped with ATP Distance To Go systems to be studied and optimised. This algorithm facilitates the tasks of signalling design and optimisation. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

    

Zheng Li  John M. Rose  David A. Hensher 《Transportation Research Part A: Policy and Practice》2010,44(1):16-38

Transport fuel consumption and its determinants have received a great deal of attention since the early 1970s. In the literature, different types of modelling methods have been used to estimate petrol demand, each having methodological strengths and weaknesses. This paper is motivated by an ongoing need to review the effectiveness of empirical fuel demand forecasting models, with a focus on theoretical as well as practical considerations in the model-building processes of different model forms. We consider a linear trend model, a quadratic trend model, an exponential trend model, a single exponential smoothing model, Holt’s linear model, Holt–Winters’ model, a partial adjustment model (PAM), and an autoregressive integrated moving average (ARIMA) model. More importantly, the study identifies the difference between forecasts and actual observations of petrol demand in order to identify forecasting accuracy. Given the identified best-forecasting model, Australia’s automobile petrol demand from 2007 through to 2020 is presented under the “business-as-usual” scenario.  相似文献   

    

M.F. Yáñez  S. Raveau  J. de D. Ortúzar 《Transportation Research Part A: Policy and Practice》2010,44(9):744-753

Travel demand models typically use mainly objective modal attributes as explanatory variables. Nevertheless, it has been well known for many years that attitudes and perceptions also influence users’ behaviour. The use of hybrid discrete choice models constitutes a good alternative to incorporate the effect of subjective factors. We estimated hybrid models in a short-survey panel context for data among many alternatives. The paper analyses the results of applying these models to a real urban case study, and also proposes an approach to forecasting using these models. Our results show that hybrid models are clearly superior to even highly flexible traditional models that ignore the effect of subjective attitudes and perceptions.  相似文献   

    

M. William Sermons  Natalya Seredich 《Transportation Research Part D: Transport and Environment》2001,6(6):417-428

In this paper, a joint multinomial logit (MNL) model of residential location and vehicle availability choice is formulated and estimated using a sample of households from the San Francisco, CA area Metropolitan Transportation Commission's 1990 household travel survey. Subsequently, models of travel intensity (number of daily household trips and vehicle-miles traveled) are estimated as a function of household characteristics and of attributes derived from the joint residential location and auto availability choice model (number of vehicles, percent land developed). A policy test shows that reducing the cost of locating in the densest areas of the metropolitan area is likely to have only marginal impact on vehicle availability and household trip making.  相似文献   

  总被引：1，自引：0，他引：1  

M. Val  &#x  ek  M. Nov  k  Z. &#x  ika  O. Vaculí  n 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1997,27(5):289-303

This paper deals with the novel control concept, so called ground-hook for active and mainly semi-active suspension of vehicles with the ultimate objective to minimize the tyre-road forces and thus the road damage. The basic ground-hook concept is extended to the several variants which enable to decrease criteria of road damage as well as to increase driver's comfort for a broad range of road unevennesses. Parameters of control law are determined by the parameter optimization for generally nonlinear model. The influence and interaction of the damping rate limits and time constants of variable shock absorbers are also taken into account. The influence of implementation of more complicated truck models is also discussed.  相似文献   

    

Eric L. Wang Associate Instructor  M. L. Hull Professor 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1996,25(3):223-246

The energy dissipated by the suspension systems used for off-road bicycles is a major concern due to the limited power source in cycling. Rider induced energy losses are those that arise from the muscular action of the rider. The purpose of this study was to develop and verify a dynamic model of a seated cyclist riding an off-road bicycle up a smooth road. With the absence of terrain irregularities, all suspension motion was rider induced. Knowing the stiffness and dissipative characteristics of the suspension elements, the power dissipated by the suspensions was calculated.

Simulation results were compared to suspension deflections that were experimentally measured for a cyclist riding a commercially available dual suspension bicycle up a 6% grade at 6.5m/s. For this particular case, no fork motion was observed in the experiments which was consistent with the simulation results. For the rear suspension, the mean and amplitude of the largest harmonic were experimentally determined to be 6.6 and ±2.7 mm respectively. Simulation results were within 0.7mm of the mean and within 0.3mm of the amplitude. The only major discrepancy between the experiments and the simulations was the presence of a phase lag in the simulation results which was attributed to inter-subject variability. The power dissipated by the rear suspension was calculated to be 6.9 Watts or 1.3% of the total power input by the rider. Given the grade and forward velocity, this translated into an equivalent mass of 1.8 kg. Thus, the bicycle appeared to be roughly 12% heavier than it actually was.  相似文献   

    

Luiz F. A. M. Gomes 《先进运输杂志》1989,23(1):43-52

This paper presents the fundamentals of a new method to rank urban transportation system alternatives, taking into consideration multiple criteria. Those criteria can be quantifiable or not. The new method is founded on Utility Theory and it makes use of absolute weighting and pairwise comparisons. It has important practical advantages over other existing methods, the most important among those advantages being its capability to be understood and accepted by professionals and by the public. A numerical example is included in the paper.  相似文献   

    

R. M. Kimber  I. Summersgill  I. J. Burrow 《Transportation Research Part B: Methodological》1986,20(6):457-476

The interrelation between geometric delay—the delay caused by the need for isolated vehicles to slow down to negotiate a junction—and the queueing delay due to vehicle-vehicle interactions is considered. The delay elements present in measurements of geometric delay are identified, and some overlap is seen with those normally included in the service mechanisms in queueing models. The total delay per vehicle is not, therefore, the sum of the measured geometric delay and the queueing delay. Although the geometric delay can be redefined so as to eliminate the overlap, it is not then measurable. A framework is developed in which the relationships between the “pure” and measured geometric delay and the queueing delay are expressed for the population mean values. Approximate expressions are developed for the elements of delay. The framework is extended to allow queueing delays to be represented by time-dependent functions allowing approximately for non-randomness in arrival and departure patterns and service time differences between queueing and non-queueing vehicles. Numerically, geometric delay elements constitute a significant proportion of total delay except at traffic intensities approaching unity. In this region time-dependent effects dominate the queueing process.  相似文献   

    

M. K. Verma  R. A. Scott  L. Segel 《Vehicle System Dynamics: International Journal of Vehicle Mechanics and Mobility》1980,9(4):181-206

The lateral dynamics of an uncontrolled motorcycle, running on a straight, level road surface, is investigated in this paper. The structural compliances in the front and the rear frames of the motorcycle are taken into account by introducing additional degrees of freedom in the analysis. The kinematics of the tires is represented by linear differential equations which are based on the taut-string model of pneumatic tires. The linear differential equations of motion are solved to yield the eigensolutions of the system. Numerical results, obtained for parameters corresponding to a Honda CB750 motorcycle, are presented and discussed.  相似文献