Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

Urban walkability considering pedestrians’ perceptions of the built environment: a 10-year review and a case study in a medium-sized city in Latin America

ABSTRACT

Numerous methodologies measuring walkability have been developed over the last years. This paper reviews the Walkability Index (WI) literature of the last decade (2009–2018) and highlights some limitations in the current approaches. Only a few studies have evaluated walkability in Latin America, mainly in big cities but not in medium and small-sized cities in the region, which present their own urbanisation dynamics, security issues, sidewalk invasion problems, and poor planning. Furthermore, most WIs in the literature use objective mesoscale variables to assess walkability in a given area. This paper contributes to filling these gaps by generating new evidence from a medium-sized city in Latin America to question if characteristics of the built environment encourage walking trips, as found in the literature, are transferable among regions. The study also proposes a novel index comprised of microscale and mesoscale built environment variables to assess walkability using virtual tools and considering users’ perceptions. The WI estimation relies on ranking probability models. The results of the case study suggest that subjective Security and Traffic Safety are the most crucial factors influencing walkability in these kind of cities, which is different from what is found in the literature from cities in developed countries where Sidewalk Condition and Attractiveness are the most important factors. Security appeared to be strongly associated with a subjective dimension, represented by the fear of crime or perceived risk for crime, instead of the actual occurrence of crimes. This result evidences the importance of the physical attributes of the real world and how they are captured, judged, and processed by pedestrians. Then, regional transferability of WIs needs to be done carefully. Finally, results in this paper highlight the importance of microscale built environment characteristics in the WI formulation in these cities. Results are in line with other research in some cities of the region, which found that microscale variables such as pavement quality and presence of obstacles on the sidewalks are relevant components to promote walkability.     

Comparison on travel scheduling between driving and walking trips by habitual car users

Research on walking behavior has become increasingly more important in the field of transportation in the past decades. However, the study of the factors influencing the scheduling decisions related to walking trips and the exploration of the differences between travel modes has not been conducted yet. This paper presents a comparison of the scheduling and rescheduling decisions associated with car driving trips and walking trips by habitual car users using a data set collected in Valencia (Spain) in 2010. Bivariate probit models with sample selection are used to accommodate the influence of pre-planning on the decision to execute a travel as pre-planned or not. The explicative variables considered are: socio-economic characteristics of respondents, travel characteristics, and facets of the activity executed at origin and at destination including the scheduling decisions associated with them. The results demonstrate that a significant correlation exists between the choices of pre-planning and rescheduling for both types of trips. Whether for car driving or walking trips, the scheduling decisions associated with the activity at origin and at destination are the most important explicative factors of the trip scheduling and rescheduling decisions. However, the rescheduling of trips is mainly influenced by modifications in the activity at destination. Some interesting differences arise regarding the rescheduling decision processes between travel modes: if pre-planned, walking trips are less likely to be modified than car driving trips, showing a more rigid rescheduling behavior.     

The design of interurban bus networks in city centers

This paper proposes a bilevel formulation for solving the Bus Network Design Problem (BNDP) of interurban services entering a major city. It is focused in interurban services because it is a growing problem in most of major cities, yet new in the literature. The layout of interurban bus routes and the locations of transfer stations in the main city are the key factors to provide a competitive public transportation service to commuters in a metropolitan area. The number of commuters in huge urban concentrations is growing due to the difficulties of living near the city center. The objective function of the first level is defined with the aim of reducing user and agency costs. In the second level the performance of users is addressed. Furthermore, a local search method based on the Tabu Search algorithm was carried out to guide the exploration in the solution domain. The results obtained in a set of test problems have demonstrated that the restart parameters of the algorithm play a significant role in the efficiency of the algorithm. Finally, implementation in the large network of Barcelona (Spain) reduces the total cost by 5% with regard to the present situation.     

Plate scanning tools to obtain travel times in traffic networks

The management of vehicle travel times has been shown to be fundamental to traffic network analysis. To collect travel time measurement, some methods focus solely on isolated links or highway segments, and where two measurement points, at the beginning and at the end of a section, are deemed sufficient to evaluate users' travel time. However, in many cases, transport studies involve networks in which the problem is more complex. This article takes advantage of the plate scanning technique to propose an algorithm that minimizes the required number of registering devices and their location in order to identify vehicles candidates to compute the travel times of a given set of routes (or subroutes). The merits of the proposed method are explained using simple examples and are illustrated by its application to the real network of Ciudad Real.     

Lagrangian flow in the California Undercurrent, an observation and model comparison

During the period 1992–1998, 38 isobaric RAFOS floats were deployed to sample the subsurface flow of the California Undercurrent. The deployments, released over the California continental slope west of San Francisco, have sampled robust year-round poleward subsurface flow associated with the Undercurrent most seasons and the combined inshore current and Undercurrent in winter. Two other types of flow have been seen: a region of weak flow with little net displacement just west of the California Undercurrent, and an active westward propagating eddy field. This eddy field appears to be the primary mechanism for moving floats from the Undercurrent into the ocean interior. The observations and statistics from the RAFOS floats are compared with Lagrangian estimates of particles tracked in a global high resolution ocean simulation in order to evaluate the fidelity of the model along an eastern boundary. The results show that the model reproduces the general character of the flow reasonably well, but underestimates both the mean and eddy energies by a substantial amount.     

Estimating the value of risk reductions for car drivers when pedestrians are involved: a case study in Spain

We estimated the benefits associated with reducing fatal and severe injuries from traffic accidents using a stated choice experiment where choice situations were generated through a statistically efficient design. Specifically, the risk variables were defined as the expected annual number of vehicle car-users that suffered their death or were severely injured in a traffic accident. In addition, and differing from previous research, the number of pedestrians that died or were severely injured in traffic accidents per year was also included as a risk attribute in the choice experiment, to attempt at measuring drivers’ willingness to pay to reduce the risk of hitting pedestrians in a crash. The empirical setting was a choice of route for a particular trip that a sample of car drivers periodically undertakes in Tenerife, Spain. Models were estimated accounting for random taste heterogeneity and pseudo-panel data correlation. The median of the distribution of simulated parameters was used to obtain a representative measure for the monetary valuation of risk reductions. We found that the ratio between the values of reducing the risk of suffering a serious injury and that of reducing a fatality was approximately 18 %. Further, and quite novel, we also found that the value of reducing a pedestrian fatality was 39 % of the value of reducing a car occupant fatality.     

Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors北大核心CSCD

Considering the influence of many factors (soil loss, frontal additional thrust, the friction force of the shield shell and the additional grouting force), a method for improving the uniform soil body movement model is pro-posed, and a mechanical calculation model is established to study the calculation method for soil body deformation caused by double-line parallel shield driving. Based on the Mindlin solutions of elastic mechanics, the theoretical solutions for soil body deformations caused by the last three factors are calculated; considering the uniform soil body movement model, the theoretical solutions for soil body deformations caused by soil loss are calculated, then the to-tal theoretical solutions for soil body deformations under multiple factors are obtained by means of superposition. The vertical surface settlement, vertical horizontal displacement, and vertical displacements of the soil body at different depths of Hangzhou Metro Line 1 are calculated to analyze the variation laws. Meanwhile the influential factors for horizontal displacement variation are studied. The research shows that with a change of depth, the settlement of the soil body changes within the scope of 10 to 13 m in the horizontal direction near where the maximum settlement occurs;the direction of the horizontal displacement of the soil body changes with a change of the positional relationship be-tween the calculation points and the tunnel; and with an increase of interval J for the two tunnels, the horizontal dis-placement of the soil body of a deep double-line tunnel decreases while the displacement near the surface changes slightly. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Effect of Seismic Parameters on the Safety Factor for an Underground Cavern北大核心CSCD

In order to quantitatively evaluate the safety of the surrounding rock of an underground cavern under seis-mic load, a comprehensive evaluation method for the stability of surrounding rock is proposed based on the general safety factor and point safety factor. A calculation method for the general safety factor of a cavern based on the prin-ciple of shear strength reduction of a rock mass is given, the run-through of the plastic zone between the main power-house and main transformer room is presented as a critical criterion for the overall instability of the cavern, and the general safety factor is obtained by searching for the reduction coefficient. A point safety factor calculation method based on the Mohr-Coulomb yield criterion is given. The influence of different seismic input parameters on the general safety factor of the cavern and the point safety factor of key positions are studied based on an underground power-house cavern of a hydropower station in Southwest China. The results show that the quantitative evaluation method for the stability of the surrounding rock based on the safety factor is feasible and can reflect the general safety de-gree and local safety degree of different positions of the cavern for different working conditions. It is found that the general safety factor of the cavern and the point safety factor of key positions decrease with an increase of the ampli-tude and duration of a seismic wave while they increase with an increase of the incident angle; additionally, the low frequency of a seismic wave has a great influence on the cavern while the high frequency has little effect. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Adapting without Retreating: Responses to Shoreline Change on an Inlet-Associated Coastal Beach

Coastal barrier systems around the world are experiencing higher rates of flooding and shoreline erosion. Property owners on barriers have made significant financial investments in physical protections that shield their nearby properties from these hazards, constituting a type of adaptation to shoreline change. Factors that contribute to adaptation on Plum Island, a developed beach and dune system on the North Shore of Massachusetts, are investigated here. Plum Island experiences patterns of shoreline change that may be representative of many inlet-associated beaches, encompassing an equivocal and dynamically shifting mix of erosion and accretion. In the face of episodic floods and fleeting erosive events, and driven by a combination of strong northeast storms and cycles of erosion and accretion, the value of the average Plum Island residence increases by 34% for properties on the oceanfront where protection comprises a publicly constructed soft structure. Even in the face of state policies that ostensibly discourage physical protection as a means of adaptation, coastal communities face significant political and financial pressures to maintain existing protective structures or to allow contiguous groups of property owners to build new ones through collective action. These factors mitigate against adapting to shoreline change by retreating from the coast, thereby potentially increasing the adverse effects of coastal hazards.