An intersection turning movement estimation procedure based on path flow estimator

Estimation of intersection turning movements is one of the key inputs required for a variety of transportation analysis, including intersection geometric design, signal timing design, traffic impact assessment, and transportation planning. Conventional approaches that use manual techniques for estimation of turning movements are insensitive to congestion. The drawbacks of the manual techniques can be amended by integrating a network traffic model with a computation procedure capable of estimating turning movements from a set of link traffic counts and intersection turning movement counts. This study proposes using the path flow estimator, originally used to estimate path flows (hence origin–destination flows), to derive not only complete link flows, but also turning movements for the whole road network given some counts at selected roads and intersections. Two case studies using actual traffic counts are used to demonstrate the proposed intersection turning movement estimation procedure. Copyright © 2010 John Wiley & Sons, Ltd.     

Flexible spatial dependence structures for unordered multinomial choice models: formulation and application to teenagers’ activity participation

The current article proposes an approach to accommodate flexible spatial dependency structures in discrete choice models in general, and in unordered multinomial choice models in particular. The approach is applied to examine teenagers’ participation in social and recreational activity episodes, a subject of considerable interest in the transportation, sociology, psychology, and adolescence development fields. The sample for the analysis is drawn from the 2000 San Francisco Bay Area Travel Survey (BATS) as well as other supplementary data sources. The analysis considers the effects of a variety of built environment and demographic variables on teenagers’ activity behavior. In addition, spatial dependence effects (due to common unobserved residential neighborhood characteristics as well as diffusion/interaction effects) are accommodated. The variable effects indicate that parents’ physical activity participation constitutes the most important factor influencing teenagers’ physical activity participation levels, In addition, part-time student status, gender, and seasonal effects are also important determinants of teenagers’ social-recreational activity participation. The analysis also finds strong spatial correlation effects in teenagers’ activity participation behaviors.     

Behavior of taxi customers in hailing vacant taxis: a nested logit model for policy analysis

This study models and examines the taxi customers' preferences for hailing vacant taxis on streets. A stated preference survey was conducted to randomly select and interview 1242 taxi customers at taxi stands and pedestrians on streets, who had experiences of taking taxis recently, about their choices under different given hypothetical scenarios. In total, 4968 observations were collected and used for developing the discrete choice models for the analysis. To account for the potential correlations among alternatives, two nested logit models are developed, calibrated, and compared with a standard multinomial logit model in the investigation. The results of likelihood ratio test demonstrate that one of the developed nested logit models is better than the standard multinomial logit model to describe the search behavior of taxi customers. The model results also show that the walking time to and the waiting time at the location for hailing taxis, the extra travel time to the destination because of local circulation for finding a way from the pickup location heading to a passenger's destination, as well as the taxi customers' perceptions for walking to and waiting at taxi stands were found as significant factors to influence their decisions. In addition, the results of market segmentation analysis illustrate the variations in taxi‐search strategies of taxi customers in different districts and regions. Some policy implications on introducing more taxi stands and improving the utilization rates of taxi stands are also discussed. We believe that the proposed models, findings, and discussion are useful for developing micro‐simulation models to evaluate the performance of road traffic networks with taxi services and developing simulation‐based optimization models to answer policy questions related to taxi services. Copyright © 2015 John Wiley & Sons, Ltd.     

Improved theoretical modeling of a cyclone separator as a diesel soot particulate emission arrester

Particulate matter is considered to be the most harmful pollutant emitted into air from diesel engine exhaust, and its reduction is one of the most challenging problems in modern society. Several after-treatment retrofit programs have been proposed to control such emission, but to date, they suffer from high engineering complexity, high cost, thermal cracking, and increased back pressure, which in turn deteriorates diesel engine combustion performance. This paper proposes a solution for controlling diesel soot particulate emissions by an improved theoretical model for calculating the overall collection efficiency of a cyclone. The model considers the combined effect of collection efficiencies of both outer and inner vortices by introducing a particle distribution function to account for the non-uniform distribution of soot particles across the turbulent vortex section and by including the Cunningham correction factor for molecular slip of the particles. The cut size diameter model has also been modified and proposed by introducing the Cunningham correction factor for molecular slip of the separated soot particles under investigation. The results show good agreements with the existing theoretical and experimental studies of cyclones and diesel particulate filter flow characteristics of other applications.     

Adsorption models and structural characterization for activated carbon fibers

The nitrogen adsorption isotherms at 77.69 K were measured for two samples of activated carbon fibers and their microstructures were investigated. Among established isotherm equations, the Dubinin-Radushkevich equation showed the best agreement with the experimental data, while the Langmuir equation showed a large deviation when employed at low relative pressures. The MP method, t-method and αs-method were used to analyze the pore size distribution. The calculated average pore widths and BET (Brunauer-Emmett-Teller) surface areas for the sample A-13 were 0.86 nm and 1 286.60 m2/g, while for the sample A-16, they were 0.82 nm and 1 490.64 m2/g. The sample with larger pore width was more suitable to be used as additive in chemical heat pumps, while the other one could be used as adsorbent in adsorption refrigeration systems.     

Effect of drowsiness on driving performance variables of commercial vehicle drivers

Driver drowsiness is a major safety concern, especially among commercial vehicle drivers, and is responsible for thousands of accidents and numerous fatalities every year. The design of a drowsiness detection system is based on identifying suitable driver-related and/or vehicle-related variables that are correlated to the driver’s level of drowsiness. Among different candidates, vehicle control variables seem to be more promising since they are unobtrusive, easy to implement, and cost effective. This paper focuses on in-depth analysis of different driver-vehicle control variables, e.g., steering angle, lane keeping, etc. that are correlated with the level of drowsiness. The goal is to find relationships and to characterize the effect of a driver’s drowsiness on measurable vehicle or driving variables and set up a framework for developing a drowsiness detection system. Several commercial drivers were tested in a simulated environment and different variables were recorded. This study shows that drowsiness has a major impact on lane keeping and steering control behavior. The correlation of the number and type of accidents with the level of drowsiness was also examined. Significant patterns in lateral position variations and steering corrections were observed, and two phases of drowsiness-related degradation in steering control were identified. The two steering degradation phases examined are suitable features for use in drowsiness detection systems.     

利用ADAMS对双横臂独立悬架进行仿真分析

通过某商务车的独立悬架的数学建模和仿真模型,利用ADAMS软件精确地计算汽车运动中悬架定位参数的变化,分析了该悬架定位参数对操纵稳定性的影响,以提高产品开发质量。     

Adaptation planning for climate-resilient urban infrastructures

This paper analyzes the interdependency across two critical infrastructures of transportation and motor fueling supply chains, and investigates how vulnerability to climatic extremes in a fueling infrastructure hampers the resilience of a transportation system. The proposed model features both a bi-stage mathematical program and an extension to an ‘α-reliable mean-excess’ regret model. The former aspect allows decision makers to optimize the pre-disaster asset prepositioning against the maximum post-disaster system resilience. The latter aspect of the proposed model devalues the impact of ‘low-probability, high-cost’ sub-scenarios upon model results. The model reveals the reliance of post-disaster urban mobility on the interdependent critical infrastructure of motor fueling supply chains. The results also suggest how investment in the fueling infrastructure’s vulnerable elements protects urban mobility while the transportation network is stressed or under attack.     

Investigation and analysis of high temperature corrosion and degradation of marine boiler combustion swirler

The present paper investigated and analyzed swirler material consisting of mild steel which was subjected to service for the period of one year in a 30 MW marine boiler. Due to the presence of high temperatures in the furnace coupled with the corrosive marine environment swirler material showed accelerated degradation and material wastage. An investigation into the feasibility of manufacturing the existing swirler with an alternate material or coating the swirler material with a thermal barrier coating was undertaken. Based on their properties and performance, SS 304 and SS 316 were proposed as the replacement materials for the swirler. The other alternative of coating the existing swirlers with a form thermal barrier coating to observe for any improvement in their performance at elevated temperatures was also tested. Stellite, which is a Ni-Co based coating, was carried out on the MS samples and the same were exposed to same temperatures mentioned above. The performance of the available options was evaluated with respect to the grain structure of the material, the hardness value of the materials and deterioration at elevated temperatures. Investigation showed the proposed materials/coatings like SS 304, SS 316 and Stellite coating revealed that SS 316 is the material best suited for high temperature application.     

Understanding the modifiable areal unit problem and identifying appropriate spatial unit in jobs–housing balance and employment self-containment using big data

Transportation - Jobs–housing balance (JHB) and employment self-containment (ESC) have been used to examine the jobs–housing relationship. However, the effect of the modifiable areal...