Effect of injection timing,injector opening pressure,injector nozzle geometry,and swirl on the performance of a direct injection,compression-ignition engine fuelled with honge oil methyl ester (HOME)

Increasing petroleum prices, increasing threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for engines. Evolving feasible technology and recurring energy crisis necessitated a continued investigation into the search for sustainable and clean-burning renewable fuels. In this investigation, Honge oil methyl ester (HOME) was used in a four stroke, single cylinder diesel engine. Tests were carried out to study the effect of fuel injection timing, fuel injector opening pressure (IOP) and injector nozzle geometry on the performance and combustion of CI engine fuelled with HOME. Injection timing was varied from 19°bTDC (before top dead centre) to 27°bTDC in incremental steps of 4°bTDC; injector opening pressure was varied from 210 bar to 240 bar in steps of 10 bar. Nozzle injectors of 3, 4 and 5 holes, each of 0.2, 0.25 and 0.3 mm size were selected for the study. It was concluded that retarded injection timing of 19°bTDC, increased injector opening pressure of 230 bar and 4 hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions. Further air-fuel mixing was improved using swirl induced techniques which enhanced the engine performance as well.     

An investigation of a semiactive suspension for a fork lift truck

This paper investigates the feasibility of a semiactive suspension of the cabin of a fork lift truck as a way of reducing the effect of harmful vibrations on the health of truck drivers. A suspension based on MR fluid dampers has been designed and implemented on an actual vehicle and heuristic control strategy has been developed, which preserves the filtering properties of the passive suspension when the vehicle moves in a straight line with a constant velocity and suppresses the large amplitude pitch and roll motion during turns and braking. Field tests have demonstrated a substantial comfort improvement with respect to the passive suspension, during the braking and turning phases, without any noticeable detrimental effects.     

Modelling of high speed gas quenching

1ntroductionGaswimpfobe,usuallynitrOgen,mandheiumatposuresOfuPtO60barhasbousedinvacmbosfOrSendywtanditScharWshcsforbds-ofCOInNarewe1knOWUIl].More~theuseofgasq-aPPliedtOs~orsinglelayereOfCOmwtthawereheandindsvacuumorCOnwtalatmOSPherbohasboPrOpond(2l.TOathaatetheedtOCOOtheboacestruCtUrasweIIastheCOIntwIkeSechquesOboinvolvethetrareferOftheNttobeqMtoa~allydeaignedcoklchfortsl.6as~of~peinndsngmaybosoaS~the-ofbo'bds-Oha'pesstwfOr'juSb~'manwt.Unlikliquldbased~antS,gaswiiscleannO…     

Hierarchical optimisation of the design parameters of a vehicle suspension system

This paper presents a design methodology for the mechanical systems entitled First Design. It is based on a hierarchical organisation of the design, taking into account the notion of robustness at an early phase of the project. The aim is to improve the quality of the system in order to make it robust, less sensitive to the variability of the external parameters and design parameters. We distinguish two main stages of the design cycle: one concerning functional parameters and another concerning physical parameters. The methodology is based on simplified models, on sensitivity analysis and on robust multi-objective optimisation. As an example, the methodology will be applied to the optimisation of vehicle suspension system design parameters. For each stage of the hierarchical design, adapted simplified models, sensitivity analyses and optimisation processes will be studied and applied to our vehicle suspension system.     

Galvanic interactions of HE15 /MDN138 & HE15 /MDN250 alloys in natural seawater

HE15 is a heat treatable high strength alloy with excellent machinability find wide applications in aerospace and defence industries. In view of their excellent mechanical properties, workability, machinability, heat treatment characteristics and good resistance to general and stress corrosion cracking, MDN138 & MDN250 have been widely used in petrochemical, nuclear and aerospace industries. The galvanic corrosion behaviour of the metal combinations HE15 /MDN138 and HE15 /MDN250, with 1:1 area ratio, has been studied in natural seawater using the open well facility of CECRI’s Offshore Platform at Tuticorin for a year. The open circuit potentials of MDN138, MDN250 and HE15 of the individual metal, the galvanic potential and galvanic current of the couples HE15 /MDN138 and HE15 /MDN250 were periodically monitored throughout the study period. The calcareous deposits on MDN138 and MDN250 in galvanic contact with HE15 were analyzed using XRD. The electrochemical behaviors of MDN138, MDN250 and HE15 in seawater have been studied using an electrochemical work station. The surface characteristics of MDN138 and MDN250 in galvanic contact with HE15 have been examined with scanning electron microscope. The results of the study reveal that HE15 offered required amount of protection to MDN138 & MDN250.     

Highway Tunnel Blasting Vibrations and Cracking of Adjacent Residential Houses北大核心CSCD

A systematic analysis and discussion of the causes of house cracking are conducted by testing the blast vibration velocity of typical neighboring houses, analyzing the types of house cracking, monitoring the characteris-tics of house cracks and calculating the temperature stress at the roof and wall based on an assessment of highway tunnel blasting vibrations leading to cracking of neighboring houses. The results show that the main cause of house cracking adjacent to the tunnel is temperature stress, not blasting vibration. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Temperature Measurements and Tail Brush Replacement using Frozen Liquid Nitrogen for the Nanjing Weisanlu Tunnel北大核心CSCD

A scheme for stopping water by freezing liquid nitrogen and replacing the tail brush is presented in light of the situation encountered at the Nanjing Weisanlu river-crossing tunnel, a long-distance shield driving tunnel characterized by serious water leakage, sand gushing and water inflow at the shield tail brush. The law of the tempera-ture change of the master outlet circuits and each branch circuit when using liquid nitrogen freezing to stop water un-der high water pressures and the temperature change law for the soil body at different depths are analyzed. The re-sults show that: the temperature difference of the liquid nitrogen is large at the inlet and outlet of the freezing pipe,and it reaches around 35℃ after 6 days; the temperature drops fastest in the pebble layer, and the second fastest in the gravel sand layer, with the temperature cooling slowest in the silty fine sand layer; the average velocities at the frontal surface of the frozen soil in the pebble layer, gravel sand layer and silty fine sand layer are 15.5 cm/d, 12.5 cm/d and 8.3 cm/d, respectively, within the range 600 mm away from the frozen pipe; and affected by heat and air convection in the tunnel, the temperature at the junction of the segment and soil is higher than that in the soil layer.A complete frozen wall takes shape after 13 days of liquid nitrogen freezing, and tail brush replacement takes 22 days from freezing. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Hierarchical ordering of nests in a joint mode and destination choice model

This paper seeks to explore the relationship between mode and destination choice in an integrated nested choice model. A fundamental argument can be made that in certain circumstances, the ordering of choices should be reversed from the usual sequence of destination choice preceding mode choice. This results in a travel demand model where travelers are more likely to change destinations than to change transportation modes. For small and medium size urban areas, particularly in the United States, with less well developed public transit systems that draw few choice riders, this assumption makes much more sense than the traditional modeling assumptions. The models used in the new travel modeling system developed for Knoxville, Tennessee utilize this reversed ordering, with generally good results, which required no external tinkering in the logsum parameters.     

A modelling system to simulate goods movements at an urban scale

The paper reports a modelling system to simulate goods movements at an urban scale. It allows joint analysis of choices made by end-consumers (assumed to be families) and retailers. These movements are examined at two levels: analysis of commodity flows, in terms of quantity, generated by the consumption of commodities; analysis of commodity flows, in terms of vehicles, due to restocking. The first level allows us to calculate the goods quantity flows due to consumption and restocking; the second level allows us to determine the service, vehicles used and target time, as well as the route chosen for restocking sales outlets in order to estimate vehicle flows on the urban/metropolitan transportation network. The modelling system is a multi-step model and considers a disaggregated approach for each decisional level.     

Marine Protected Area Management Effectiveness: Progress and Lessons in the Philippines

Quantifying progress in management of marine protected areas (MPAs) is crucial to marine conservation and fisheries management in the Philippines. This study compiles data on the status, occurrence, and management gaps of MPAs through coordination with multiple organizations supporting and guiding MPAs in the Philippines. MPA management effectiveness was measured using a MPA Rating System. Since 2002 the modal MPA rating levels increased from level 1 (initiated) to level 4 (sustained) in 2008/9. This upward trend is attributed to factors that promoted both the establishment and improved management of MPAs. Analysis indicated that: (1) most MPAs struggle with budgetary constraints or lack of sustainable financing and (2) overall the MPAs are being maintained and progressing with notable improvement in management despite a range of difficulties encountered during the implementation process. For MPAs in the Visayan Region for which biophysical data were available, the MPA Rating System was used to assess the effectiveness of local government capacity building on MPA coral reef health. Our results suggest that MPAs with higher ratings are likely to have better reef health conditions.