Derivation of plastic framing requirements for polar ships

A new International Association of Classification Societies standard for polar ship design, in the form of a unified requirement is being developed by an international committee with representatives from many classification societies and with the active participation of many polar nations. The framing structural requirements have been developed by a combination of analysis of existing rules and ships, finite element (FE) analysis and analytical solutions of plastic collapse mechanisms. This paper describes the derivation of the 3-hinge and asymmetrical shear plastic collapse mechanisms using work–energy principles. Energy methods are robust and well suited for developing design standards. The results are shown to compare well with non-linear FE analyses of frame strength.     

Base Dynamic Parameter Estimation of a MacPherson Suspension Mechanism

Summary A MacPherson suspension mechanism is modeled as a two degrees of freedom spatial mechanism. Its dynamic response under two excitement forces is simulated with the motion equations in Euler Parameters with the off-the-center-of-mass body-fixed coordinates derived in this paper. Simulation results are sampled and input into a numerical estimation routine based on singular value decomposition (SVD). Accurate numerical estimation results are achieved. A set of base dynamic parameters in symbolic expressions is also derived from the numerical results utilizing the concepts of mass transfer and moments of inertia transfer. This makes it possible to apply the estimation results to any MacPherson suspension mechanism with the same joint configuration. The potential applications of the symbolic base dynamic parameters in suspension design are also considered.     

Direct Computation of the Performance Index for an Optimally Controlled Active Suspension with Preview Applied to a Half-Car Model

A quadratic integral performance index is defined for a linear active preview-type suspension and a series of matrix expressions derived for its evaluation by means of MATLAB or some similar computer program in the case of a unit step input to the system. The computation, which is both fast and accurate compared to simulation, requires the solution of Lyapunov- and Riccati-type equations. Some examples of numerical computation are given and these show excellent agreement with published results. The conclusion features a useful computer program.     

Open boundary conditions in stratified ocean models

In most applications of numerical ocean models, artificial boundaries are introduced to limit the domain. Along such a boundary we need to apply what is often referred to as an open boundary condition (OBC). In this paper a number of local methods used in barotropic ocean models are applied and discussed for the stratified case using a normal mode approach. The OBCs are the simple conditions: clamped, prescribed and zero gradient; the radiation conditions: Camerlengo–O'Brien, Orlanski and a method of characteristics based on linear equations; and a sponge type condition: the flow relaxation scheme. The OBCs have been implemented in a 3-layer ocean model and examples of how the various OBCs perform for three simple flow situations are investigated. The cases are: internal wave radiation, a quasi-steady coastal jet and the response to a storm moving across a strait. It is found that the flow relaxation scheme and the method based on characteristics perform well for the test cases in general, although some of the simpler methods give better results in individual cases.     

Optimizing shipping company operations using business process modelling

In order to identify the elements constituting quality in services, a business process modelling methodology has been applied in the case of a Greek liner shipping company. The company operations have been identified and analysed in order to assess the complete performance of service elements and thereafter identify how to match the service performance against the user requirements. A liner container service within Europe has to compete with the road transport which, in many cases, is an alternative to the sea transportation and not complementary to it. Thus, not only the ship has to be envisaged when aiming to improve quality in services but also the whole chain, namely port authorities, land transportation enterprises, subcontractors, agents, charterers and others. A set of potential improvements within this framework are thus suggested and time and cost (examined in a specific voyage scenario) are measured before and after the implementation of these measures. Very large time and cost savings are observed after the application of the technology improvements, allowing, in fact, the shipping company to even increase the number of round trips per year in the examined route. This indicates that very large benefits can be drawn by analysing and critically adjusting business processes in modern shipping companies.     

Heat exchanger/catalytic system for reducing the exhaust emissions from diesel engines

A system has been researched over the past 3 years for reducing the exhaust pollutants from diesel engines for light commercial vehicles. The system researched achieves Euro 6 standards for reduction of polluting gases (CO, HC, PM, NO). It consists of 4 main sections: 1. A heater and heat exchanger (HE); 2. A CO/HC oxidising catalyst (D°C); 3. Pt catalyst on a diesel particulate filter (DPF); 4. A NO reducing reaction (SCR) within the DPF. The system operates as follows. The exhaust gas contains oxidising gases, namely both O₂ and NO₂. The levels of CO and HC are oxidised by O₂ to CO₂ for temperatures above 200°C. Carbon (PM) is oxidised to CO₂ by NO₂ but requires a temperature above 250°C. The operating exhaust temperature of 300°C is ideal for the removal of NO by using the Pt catalyst and the CO generated within the DPF. The heater is required to be able to raise the exhaust temperature at any time to 300°C in order to optimise the performance of the system, since diesel engine exhaust temperatures vary between 160°C (slow speeds) to 350°C (high speeds). Considerable heat is required (??3 kW) to maintain the exhaust gas for a 2l engine at 300°C for engine idle conditions. Therefore a heat exchanger is required to re-circulate the input heat and thereby reduce the maximum power consumption to a maximum of 500W over the engine full operating test cycle. This energy is supplied by the engine battery and alternator. Experimental results have been obtained for the exhaust from a Kubota diesel engine and the reductions in exhaust emissions of 83% (CO/ HC), 58% (NOx) and 99% (PM) were obtained. The PM was continuously cleaned so that there was no build up of back pressure.     

锰粉加工工人心血管功能的调查研究

对 ５５ 名锰粉加工工人和 ５６ 名对照工人的调查结果显示，工人工作地点 Ｍｎ Ｏ２ 浓度几何均值为 １９６ ｍ ｇ／ｍ ３ （锰尘 ０１７～２２．２４ ｍ ｇ／ｍ ３ ），样品超标率 ８８７％ 。接触组头晕头痛、睡眠障碍、容易疲劳和记忆不良的主诉率明显高于对照组（ Ｐ＜００５～００１）。接触组和对照组的心电图异常、高血压和低舒张压检出率未见显著性差异，其心率、 Ｐ Ｒ间期、 Ｑ Ｒ Ｓ波、收缩压和舒张压的均值比较也没有显著性差异。接触组心电图异常和低舒张压的 Ｏ Ｒ分别是 １．５６（９５％ 可信区间为 ０７０～３．５０）和 ２．０８（９５％ 可信区间为 ０１８～２３．５７）。     

产品平台思想——把其他行业成功的思想引入到铁道车辆制造行业

概述了在铁道车辆制造领域引入产品平台这一生产管理思想，分析了从汽车领域引入标准化加工的可能性，阐述了铁道车辆工业开始运用的情况，并介绍了一个功能强大的IT弹性开发工具，利用该工具，可允许按照用户的特殊要求，对完全参数化的车辆模型进行快速修改，并可使用标准化的程序，生产出适应用户有特殊要求的车辆。