Vibrational characteristics of automotive transmission

A mathematical model of an automotive transmission is developed, that considers the flexibility of the shafts, bearings, and gear teeth, and gyroscopic effects of geared rotors. The transverse, torsional, and axial motions are strongly coupled due to helical gearing. The excitation forces acting on the automotive transmission are classified into first, second, and third grades, based on the magnitudes of the forces that are determined by the perturbation method. The excitation forces are caused by the mass imbalances among gears, misalignment of shafts, clearance and non-linear deformation of bearings, transmission errors, and the periodic variation of the gear mesh stiffness. A bench test on loading conditions is carried out for the third speed of the automotive transmission. The experimental results of vibration characteristics are compared with those from theoretical analysis. The results show good agreement, i.e., within a tolerance of 3.3%.     

Evaluation of low-temperature diesel combustion regimes with n-Heptane fuel in a constant-volume chamber

The concept of Low Temperature Combustion (LTC) has been advancing rapidly because it may reduce emissions of NOx and soot simultaneously. Various LTC regimes that yield specific emissions have been investigated by a great number of experiments. To accelerate the evaluation of the spray combustion characteristics of LTC, to identify the soot formation threshold in LTC, and to implement the LTC concept in real diesel engines, LTC is modeled and simulated. However, since the physics of LTC is rather complex, it has been a challenge to precisely compute LTC regimes by applying the available diesel combustion models and considering all spatial and temporal characteristics as well as local properties of LTC. In this paper, LTC regimes in a constant-volume chamber with n-Heptane fuel were simulated using the ECFM3Z model implemented in a commercial STAR-CD code. The simulations were performed for different ambient gas O₂ concentrations, ambient gas temperatures and injection pressures. The simulation results showed very good agreement with available experimental data, including similar trends in autoignition and flame evolution. In the selected range of ambient temperatures and O₂ concentrations, soot and NOx emissions were simultaneously reduced.     

SMA路面配合比设计及质量控制

通过沥青混合料的组成设计和各种试验数据,确定各种规格矿料与沥青的组成比例.找出混合料的最佳组合,为保证SMA路面的性能对质量控制做以介绍.     

Partial range scaling method based washout algorithm for a vehicle driving simulator and its evaluation

Unlike an actual vehicle, a vehicle driving simulator (VDS) has limited kinematics, workspace, and bounded dynamic characteristics making it very difficult to simulate dynamic motions of an actual vehicle. To solve these problems, a washout algorithm was developed. The developed algorithm restricts the workspace of the VDS to within the kinematic limit and makes the person driving the VDS perceive movement of an actual vehicle. However, the classic washout algorithm contains several problems, such as time delay and the generation of a wrong motion signal caused by characteristics of the filters. So the driver feels “simulator sickness,” such as fatigue, nausea, headache and so on because of differences between the sense of movement of the VDS and that of a real vehicle. In this paper, a partial range scaling method based washout algorithm, including a tilt coordination system, is developed to enhance the perception of motion and reduce simulator sickness. It is verified by a simulation, a survey, and a bio signal analysis using an electrocardiogram (ECG).     

Parametric optimization of EQ6110HEV hybrid electric bus based on orthogonal experiment design

Parametric optimization is an important step for any mechanical system design, including the development and design of a hybrid electric bus. To obtain an optimized parameter grouping of the EQ6110HEV hybrid electric bus for best fuel economy, an orthogonal experiment design method is applied to the parameter optimization process of the EQ6110HEV hybrid prolusion system. This paper proposes two orthogonal experiment methods; the basically orthogonal experiment method and the synthetically orthogonal experiment method. By this means, the development time and the testing costs are reduced, and the impact of factors and their optimal levels are obtained by a range analysis of the experiment results. The results show that the fuel economy of the optimized parameter grouping is improved by 4.1 percent for the four-stage urban driving cycle in China and by 8.7 percent for the Wuhan urban driving cycle of public buses in China, in comparison with that of the parameter grouping of the current configuration.     

Simple design approach for improving characteristics of interior permanent magnet synchronous motors for electric air-conditioner systems in HEV

In this paper, a simple design method for improving the performance of an interior permanent magnet synchronous motor (IPMSM), for driving the air-conditioning compressor used in hybrid electric vehicles, is presented. There are many design methods that optimize the IPMSM. Each method deals with a variety of design factors, such as slot opening, pole arc, and rotor shape. However, as the number of design variables increases, a lot of modeling and analysis time is needed in order to improve the characteristics of an IPMSM. This paper demonstrates that the optimization of a double-layer IPMSM, satisfying the given design conditions, is possible with only a flux barrier shape design. Then, response surface methodology is applied as the optimization method, and the validity of the design approach is verified by comparison with test results.     

Computer Aided Simulation on Precision Cold Forging of Universal Joint Cross

IntroductionThefiwtee1emenmethod(FEM)playsanextrmelyimPortantroleintheanalysesofengineeringproblems.ForalongtimethismethodhasmainlybeenaPPliedinthelinearfieldandshownitsgreatpower.HoweveealOtofnonlinearengineeringPrOblemsWhichcanneitherbesimPlyreducedtolinearonesnorrCPresentedbylinearlyanalogywhichshallchnsethePfacticalconditionsrelativelymuch,havechallengedfiniteelementmethod(FEM).RecentymuchProgresshasbeenmadebothinthemathematicalandmechanicaltheoryandthecomPulertechnologysothatevent…     

An Active Pantograph with Shaped Frequency Response Employing Linear Output Feedback Control

In pantographs used for current collection on high speed electric trains it is desirable to minimise the fluctuations in the contact force between the collector head and the catenary. A simple two-mass linear model is employed for the pantograph and the design of the proposed control system is based on the input admittance at low frequencies. Frequency shaping is incorporated in the performance index, and a simple dynamic controller is employed to achieve optimality in an equivalent transformed system, while minimising the number of feedback quantities to be measured. A significant reduction in the average contact force appears possible.     

Mixing in the surface boundary layer of a tropical freshwater reservoir

A combined observational-modeling study was conducted to investigate turbulence mixing, and the relation to surface forcing, in the surface boundary layer (SBL) of a tropical, high-altitude, freshwater reservoir. A suite of vertical profiles of temperature microstructure, collected at three different stations of one-day duration each, provided estimates of dissipation rates of turbulence kinetic energy, , and temperature variance, χ. Numerical simulations of and χ, using state-of-the-art, public domain, two-equation turbulence closure models, compared favorably with the observations and reproduced the dynamics of daytime wind mixing as well as the vertical and temporal turbulence structure during nighttime convective conditions.Two independent estimates of vertical eddy diffusivities in the stably stratified (daytime) SBL, computed from the microstructure measurements, agreed closely, and the near surface heat and buoyancy fluxes, computed from the diffusivities, were similar to those computed independently from surface meteorology. Model generated eddy diffusivities agreed closely with the observed values, except those generated by K profile parameterization (KPP) model simulations. The good agreement provides confidence that nutrient fluxes in the SBL may be accurately computed from the models when forced with regularly measured surface meteorological parameters. The consequences are important for estimation of daily primary productivity rates in the euphotic zone and the ability to predict algal blooms such as those observed in the present reservoir.