Observations on colony formation by the cosmopolitan phytoplankton genus Phaeocystis

Few marine phytoplankton have heteromorphic life cycles and also often dominate the ecosystems in which they occur. The class Prymnesiophyceae contains a notable exception: the genus Phaeocystis includes three species that form gelatinous colonies but also occur within their ranges as solitary cells. Phaeocystis antarctica and P. pouchetii are exclusively high latitude taxa, and are notable for regionally tremendous blooms of the colony stage. P. globosa occurs circumglobally, yet its colony blooms primarily are confined to colder waters within its range. Three additional species are warm water forms that have been reported only as solitary cells or loose aggregations that bear little resemblance to the organized colonies of the other taxa. Interpretation of existing data indicates that resource availability (light, temperature and nutrients) by itself is not sufficient to explain this distinction between cold-water colony-forming taxa and warm water solitary cell taxa, nor why colony development in P. globosa is essentially a spatially restricted phenomenon within a much broader geographic range. Colony development by P. globosa in situ has been observed at temperatures ≥20 °C, but only rarely and generally under conditions of seasonally or anthropogenically elevated nutrient supply. Data presented here demonstrate colony development at 20–22 °C in natural plankton communities from oligotrophic waters that were pre-screened through 63 μm mesh (i.e. lacking mesozooplankton and large microzooplankton), but not in unscreened communities containing microzooplankton and >63 μm zooplankton. Reduction of colony proliferation at higher temperatures by mesozooplankton grazing remains as an intriguing possibility that is consistent with available evidence to help explain differences in latitudinal extent of in situ colony development. These data are interpreted within a theoretical framework regarding the potential advantages and disadvantages of the two life cycle stages.     

Initial results from long-term measurements of atmospheric humidity and related parameters in the marine boundary layer at two locations in the Gulf of Mexico

Measurements of boundary layer moisture have been acquired from Rotronic MP-100 sensors deployed on two NDBC buoys in the northern Gulf of Mexico from June through November 1993. For one sensor, which was retrieved approximately 8 months after deployment, the post- and precalibrations agreed closely and fell well within WMO specifications for accuracy. The second sensor operated continuously from June 1993 to February 1997 (3.5 years). Buoy observations of relative humidity and supporting data were used to calculate specific humidity and the surface fluxes of latent and sensible heat. Specific humidities from the buoys were compared with observations of moisture obtained from nearby ship reports, and the correlations were generally high (0.7–0.9). Surface gravity wave spectra were also acquired. The time series of specific humidity and the other buoy parameters revealed three primary scales of variability, small (h), synoptic (days), and seasonal (months). The synoptic variability was clearly dominant and occurred primarily during September, October, and November. Most of the synoptic variability was due to frontal systems that dropped down into the Gulf of Mexico from the continental US followed by air masses which were cold and dry. Cross-correlation analyses of the buoy data indicated that: (1) the moisture field was highly coherent over distances of 800 km or more in the northern Gulf of Mexico; and (2) both specific humidity and air temperature served as tracers of the motion associated with propagating atmospheric disturbances. These correlation analyses also revealed that the prevailing weather systems generally entered the buoy domain from the South prior to September, but primarily from the North thereafter. Spectra of the various buoy parameters indicated strong diurnal and semidiurnal variability for barometric pressure and sea surface temperature (SST) and lesser variability for air temperature, wind speed and significant wave height. The surface fluxes of latent and sensible heat were dominated by the synoptic events which took place from September through November with the transfer of latent heat being primarily from the ocean to the atmosphere. Finally, an analysis of the surface wave observations from each buoy, which included calculations of wave age and estimates of surface roughness, indicate that major heat and moisture flux events coincide with periods of active wave growth, although the data were insufficient to identify any causal relationships.     

The Effect of Topboxes on Motorcycle Stability

Hot wire anenometry measurements have been made in the wake of a model motorcycle and rider mounted in a windtunnel. Only in tests with a topbox present is there clear evidence of eddy shedding. Calculations have been performed on the corresponding full-scale motorcycle to determine the frequencies of the weave and wobble modes. Comparison with the wake frequencies extrapolated to full size show that at speeds of 31-34 m/s they coincide with those of the wobble mode which is found to be efficiently coupled to the aerodynamic excitation.     

带功率因数补偿的单相半控桥整流器(一)

介绍了绘制正弦线电流的开关模式单相半控桥整流器,用它来获得功率因数补偿并保持直流环节电压的恒定.在该整流器中使用4个有源开关,以便在交流端电压上产生单极脉宽调制(PWM)电压波形.与中性点箝位变流器(NPC)相比,该整流器没有箝位二极管也能实现三点式PWM控制.控制电路采用两个控制回路:外部控制回路用比例积分电压控制器调整直流环节电压,采用相位闭环电路产生与电源电压同相的正弦波形来实现功率因数补偿.在内部控制回路中,用基于载波的电流控制器跟踪线电流信号.为补偿由于负载变化所引起的中点电压,控制电路采用中点电压补偿器.该整流器的交流侧可产生3个电压电平,并用计算机仿真与试验结果验证了控制算法的有效性.     

新一代车辆标准化的综合性和前瞻性

俄罗斯正在研制新一代车辆并进行车辆检修制度的改革。本文提出标准化工作的前瞻性和综合性,要求车辆与其部件具有等寿命、装卸和调车机械应适应车辆的性能等,这样在铁路行业就会产生巨大的经济效益。     

The shoaling of nutrient-enriched subsurface waters as a mechanism to sustain primary productivity off Central Baja California during El Niño winters

Using CalCOFI data for coastal shallow stations (above 100 m depth), higher than expected nitrate concentrations were detected in near-surface high-temperature waters off of Central Baja California during some El Niño winters. Though recent data are not available for Central Baja California, past El Niño data, though limited, showed nitrate concentrations above 16 μM at temperatures above 16 °C, and nitrate concentrations between 1 and 2 μM at 19 °C, while the previously established relationship of temperature and nitrate for California Current waters predicts nitrate depletion above 14 or 15 °C. The anomalous, high temperature–high nitrate enrichment events documented in Central Baja California were detected as shallow as 9 m and as deep as 73 m, were associated with low-oxygen (between 2 and 4 ml/l) and high-salinity (between 33.8 and 34.3 psu) waters, and occurred during the winter months of an El Niño year. Using recent data for San Diego, CA, similar but weaker enrichment events were detected for the El Niño winter of 1997–1998. The periodic shoaling of a subsurface subtropical water mass of high temperature, high salinity, low oxygen and high nutrients during some El Niño winters is proposed to cause periodic enrichment and to maintain productivity during warming events in this area. Enrichment events were not detected off Ensenada, in Northern Baja California, possibly due to the amplification of the onshore flow during El Niño there, or due to the Ensenada front. The proposed mechanism of periodic enrichment of nutrient-depleted surface waters during some El Niño winters by subsurface waters from the California Undercurrent may explain the following: (1) survival of giant kelp forests at their southern limit in Central Baja California documented during past El Niño events in warm waters, (2) the rapid recovery and high carrying capacity of giant kelp documented after the mass disappearance during El Niño 1997–1998, and (3) the increase in the extent of mesotrophic chlorophyll detected in the area during the 1997–1998 and 1982–1983 El Niño events.     

Shipping and investment incentives: a trilogy Part 3. The effectiveness of investment incentives for shipping—the UK experience 1950-1987

This paper concentrates on the determinants of investment and examines both theoretical and empirical work on the investment function. The major determinants are considered and a case study of the United Kingdom shipping industry in the period 1963-1987 is undertaken. The analysis is unable to find any real link between the value of the investment incentives packages available to the UK shipping industry and the size of the UK fleet during this period. The conclusion follows that while financial factors (e.g. favourable credit arrangements) or individual components (e.g. investment grants) of fiscal packages may influence the decision to invest, the total package has not affected the level of shipping investment in the manner expected.     

Prediction of fatigue life and estimation of its reliability on the parts of an air suspension system

Air suspension systems have been implemented in various commercial vehicles, such as buses and special purpose trucks, because of the comfortable ride and easy height control. An evaluation of the durability of vehicle parts has been required for service life and safety starting in the early stages of design. The cyclic load applied to the vehicle can cause fatigue failure of parts, such as the suspension frame. This paper presents a method to predict the fatigue life of the suspension frame at the design stage of the air suspension system used in a heavy-duty vehicle. To estimate the fatigue life using the SN method, the Dynamic Stress Time History (DSTH) is necessary for the part of interest. DSTH can be obtained from the results of the flexible body dynamic analysis using the Belgian road simulation and the Modal Stress Recovery (MSR) method. Furthermore, the reliability of the predicted fatigue life can be evaluated by considering the variations in material properties. The probability and distribution of the expected life cycle can be obtained using experimental design with a minimum number of simulations. The advantage of using statistical methods to evaluate the life cycle is the ability to predict replacement time and the probability of failure of mass-produced parts. This paper proposes a rapid and simple method that can be effectively applied to the design of vehicle parts.     

Auto-ignition and micro-explosion behaviors of droplet arrays of water-in-fuel emulsion

The characteristics of auto-ignition and micro-explosion behaviors of one-dimensional arrays of fuel droplets suspended in a chamber with high surrounding temperature were investigated experimentally with various droplet spacings, numbers of droplet and surrounding temperatures. The fuels used were pure n-decane and emulsified n-decane with varied water contents ranging from 10 to 30%. All experiments were performed under atmospheric conditions with high surrounding temperatures. An imaging technique using a high-speed camera was adopted to measure ignition delay, flame lifetime, and flame spread speed. The camera was also used to observe micro-explosion behaviors. As the droplet array spacing increased, the ignition delay also increased, regardless of water content. However, the lifetime of the droplet array decreased as the droplet spacing increased. The micro-explosion starting time remained unchanged regardless of the number of the droplets or the droplet spacing; however, it tended to be delayed slightly as the water percentage and droplet spacing increased.     

Development of an LIF image processing technique for measuring drop sizes in a pre-swirl spray

Depth of field effects in laser sheet imaging were considered for droplet sizing of a pre-swirl spray. A pre-swirl spray is formed before the hollow-cone type main-swirl spray from a D.I. gasoline injector, and shows transient characteristics with high axial velocity. A microscopic imaging technique was applied to obtain high spatial resolution LIF tomograms of the pre-swirl spray. A 1 mm thick Nd:YAG laser sheet was used as a light source to make the LIF tomograms that were imaged using a high-resolution CCD camera. The droplet sizing of the pre-swirl spray was carried out using an image processing technique. In the image processing procedure, the laser sheet-straddling large-sized droplets were carefully taken into account to remove the errors caused by the depth of field effects from the limited thickness and the energy distribution of the laser sheet. The mean intensity of the individual droplets and the line profile of the LIF signal around the droplet edge were inspected to screen the laser sheet-straddling large-sized droplets. In order to consider the effects of the size-dependent LIF signal intensity, the size-classified or ensemble-averaged mean intensity of the individual droplets was introduced. The mean droplet sizes such as AMD and SMD were calculated using only screened droplets, and they slightly increase before considering the depth of field effects.