Influence of Light Distribution and Installation Style of Luminaires on Power Consumption and Lighting Effect of Tunnel Lighting北大核心CSCD

Light distribution (LD) and installation style of luminaires affect the utilization factor (UF) of luminaires, and the UF affects the luminaire power and road pavement illuminance and further the power consumption of illu- minating system and the luminous effect of road pavement. An UF model of tunnel lighting was established based on the luminaire LD data and installation parameters, in which four LD styles were adopted. For each LD the parame- ters optimization and simulation were conducted regarding four installation styles, e.g. central style, offset-of-vault style, symmetric style and staggered style. The energy-saving and the lighting effects of each LD and luminaire in- stallation style at the tunnel middle zone were studied. The results show that symmetric luminaire installation is the most energy-saving style and has the best lighting effect than the other three luminaire installation styles; the lighting effect of central luminaire installation is the second best; staggered luminaire installation is the most energy-intensive style and has the worst lighting effect except for some special-shaped LD; waterdrop-shaped LD is the most suitable one along transverse direction of tunnel and applicable to the central, offset-of-vault and symmetric luminaire instal- lation styles; symmetric butterfly-shaped LD is the most suitable one along longitudinal direction of tunnel and appli- cable to the central, offset-of-vault, staggered and symmetric luminaire installation styles; with waterdrop-shaped LD along transverse direction and symmetric butterfly-shaped LD along longitudinal direction, they are suitable for the above four luminaire installation styles, and have better energy-saving and lighting effect; as for the LD with symmetric and oblique curve, it’s better for the profile of oblique luminaire distribution to be comply with that along tunnel transverse direction, and it is suitable for the symmetric and offset-of-vault luminaire installation styles. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Heat Release Rate and Temperature Field of a Bus on Fire北大核心CSCD

Bus fires are a common source of fires that occur in tunnels and are a huge threat to the safety of the tunnel structure and related personnel. An elaborate numerical simulation model of a bus is established considering the different combustion characteristics of the bus body, seats, decorations and baggage. For fires occuring at the bus head, middle part or back seat, the temperature field, heat release rate (HRR) and characteristics of the fire are ana-lyzed. The HRR calculation formula is obtained by superimposing a Boltzmann curve on a Gaussian curve. The re-sults show the peak and average values of a bus HRR are 48 MW and 8.1 MW, respectively, and the released energy due to combustion is 14.5 GJ; the maximum burning temperature reaches 1 040℃ and the temperature near the door can reach 60℃ after 120 sec. The temperature rises fastest at the bus door when the fire occurs at the rear of the bus and it has a high chance of detonating the fuel tank. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Effects of land-use transport scenarios on travel patterns: a multi-state supernetwork application

Understanding travellers’ response is essential to address policy questions arising from spatial and transport planning sectors. This paper demonstrates the usefulness of the multi-state supernetwork approach to investigate the effects of land-use transport scenarios on individuals’ travel patterns. In particular, it illustrates that multi-state supernetworks are capable of representing activity-travel patterns at a high level of detail, including the choice of mode, route, parking and activity location. Multi-faceted activity-travel preferences can be accommodated in supernetworks. Using a micro-simulation approach, the adaptation of individuals’ travel patterns to policies can be readily captured. The illustration concerns hypothetical land-use and transport scenarios for the city of Rotterdam (The Netherlands), focusing on accessibility changes, modal substitution and shift in the use of transport and location facilities.     

Trend analysis of activity generation attributes over time

Activity generation models are relatively poorly developed in activity-based travel demand modelling frameworks. This research investigates whether observed distributions of activity attributes (activity frequency, start time and duration) used as inputs in the activity generation component of an activity-based travel demand model have changed over time. This research empirically examines changes in the distributions of activity generation attributes over time in the Greater Montreal area (GMA), Quebec, Canada. It also focuses on how these attributes vary with peoples’ socio-demographic characteristics. This research relies on the 1998, 2003 and 2008 origin–destination (O–D) household travel surveys of the GMA. The comparative analysis at three time points in a 10-year period clearly reveals that distributions of activity attributes are significantly changing over time. Work and school activities show similar trends; frequency “1” has increased and frequency “2+” has decreased over time. The occurrence of shopping activity on weekdays is decreasing over time. Start time and duration distributions for each activity have also changed significantly over time. The research allows preparing activity attributes for the application of an activity-based model, TASHA, such that they reflect temporal changes in travel behaviour of the GMA.     

Overcoming barriers to cycling: understanding frequency of cycling in a University setting and the factors preventing commuters from cycling on a regular basis

Much local and regional transport policy is attempting to increase cycling as an everyday mode of travel through infrastructure changes, education initiatives, and safety campaigns. While considerable research has examined the influence of the built form on cycling, less research has examined the barriers that prevent people who wish to cycle more (as part of their routine) from doing so. This study examines several factors influencing the frequency by which people do (and do not) cycle in a campus setting in a large metropolitan area. Mixed methods reveal differences between barriers to cycling as well as the relative strength of these barriers across categories of age, sex, and current mode used. A multinomial logit model, which controls for residential self-selection effects, predicts whether and how often a respondent cycles based on socio-demographic and trip characteristics. The presence of cycle paths is found to be strongly associated with a higher frequency of cycling commutes. Additionally, an analysis of stated barriers reveals effort and a lack of safety as the most important barriers to potential cyclists. Finally, a qualitative analysis of respondents’ open-ended responses confirms the influence of bicycle paths, but reveals other factors such as the importance of improved interactions among various street users. Findings from this research can be of benefit to transportation engineers and planners who are aiming to increase the use of cycling among various groups of commuters.     

Latent lifestyle and mode choice decisions when travelling short distances

In the quest for sustainable travel, short distances appear the most amenable to curbing the use of the automobile. Existing studies about short trips evaluate the potential of shifting from the automobile to sustainable travel options while considering the population as homogeneous in its preferences and its tendency to accept these alternative travel options as realistic. However, this assumption appears quite unrealistic and the current study offers a different perspective: the mode choices when travelling short distances are likely related to lifestyle decisions. Short trip chains of a representative sample of the Danish population in the Copenhagen Region were analysed, and more specifically a latent class choice model was estimated to uncover latent lifestyle groups and choice specific travel behaviour. Results show that four lifestyle groups are identified in the population: car oriented, bicycle oriented, public transport oriented and public transport averse. Each lifestyle group has specific perceptions of travel time (with extremely different rates of substitution between alternative travel modes), transfer penalties in public transport trip chains, weather influence (especially on active travel modes), and trip purpose effect on mode selection. Consequently, when thinking about measures to increase the appeal of sustainable travel options, decision-makers should look at specific individuals within the population and more sensitive individuals to comfort and level-of-service improvements across the lifestyle groups.     

Specification of regret-based models of choice behaviour: formal analyses and experimental design based evidence

Travel behaviour analysis has recently witnessed a rapidly growing interest in regret-based models of choice behaviour. Two different model specifications have been introduced in the transportation literature. Chorus et al. (Transportation Research B 42: 1–18, 2008a; in: Proceedings 87th Annual Meeting of the Transportation Research Board, Washington DC, 2008b) specified regret as a (non) linear function of the difference between the best-foregone choice alternative and the chosen alternative. Later, as an approximation to the original specification, Chorus (2010) suggested a logarithm function of utility differences between all choice alternatives, mainly for ease of estimation. This paper makes two contributions to this literature. First, formal analyses are conducted to identify the parameter space where the logarithmic specification becomes theoretically inferior to the original specification. Second, an empirical stated choice study on the choice of shopping centre is conducted to empirically test which specification best describes stated choices. Results suggest that for the collected data the original specification outperforms the new specification. Implications of this finding for the application of regret-based choice models in travel behaviour analysis are discussed.     

Estimating the trip generation impacts of autonomous vehicles on car travel in Victoria,Australia

Autonomous vehicles (AVs) potentially increase vehicle travel by reducing travel and parking costs and by providing improved mobility to those who are too young to drive or older people. The increase in vehicle travel could be generated by both trip diversion from other modes and entirely new trips. Existing studies however tend to overlook AVs’ impacts on entirely new trips. There is a need to develop a methodology for estimating possible impacts of AVs on entirely new trips across all age groups. This paper explores the impacts of AVs on car trips using a case study of Victoria, Australia. A new methodology for estimating entirely new trips associated with AVs is proposed by measuring gaps in travel need at different life stages. Results show that AVs would increase daily trips by 4.14% on average. The 76+ age group would have the largest increase of 18.5%, followed by the 18–24 age group and the 12–17 age group with 14.6 and 11.1% respectively. If car occupancy remains constant in AV scenarios, entirely new trips and trip diversions from public transport and active modes would lead to a 7.31% increase in car trips. However increases in car travel are substantially magnified by reduced car occupancy rates, a trend evidenced throughout the world. Car occupancy would need to increase by at least 5.3–7.3% to keep car trips unchanged in AV scenarios.     

Estimation of multinomial probit-kernel integrated choice and latent variable model: comparison on one sequential and two simultaneous approaches

Integrated choice and latent variable (ICLV) model incorporates latent factors into standard discrete choice model with aim to provide greater explanatory power. Using simulated datasets, this study makes a comparison among three estimation approaches corresponding to the sequential approach and two simultaneous approaches including the maximum simulated likelihood with GHK estimator and maximum approximate composite marginal likelihood (MACML) approach, to evaluate their abilities to recover the underlying parameters of multinomial probit-kernel ICLV model. The results show that both simultaneous approaches outperform the sequential approach in terms of estimates accuracy and efficiency irrespective of the sample sizes, and the MACML approach is the most preferable due to its best performance on recovering true values of parameters with relatively small standard errors, especially when the sample size is large enough.