Aircraft Ground Dynamics

The state-of-the-art in analysing a number of ground manoeuvring processes on aircraft is described. The mathematical models are as good as the data supplied to them.     

Computer-Simulation of the Dynamical Curving Behaviour of a Railway-Bogie

This paper describes the modelling of a two axle railway-bogie with variable design configurations and its application in the investigation of the behaviour in transitional and circular curves. Several results indicate possibilities to improve the curving properties and recommend the usage of forced-steering bogies, which show better performance in narrow curves without unbearable sacrifices to high-speed-behaviour on straight track.     

3-D numerical and experimental analysis for airflow within a passenger compartment

People use cars so frequently that they always consider the air-conditioning, and thermal comfort of the driver and passenger when buying a new car. Therefore accurate simulation of the thermal performance of automobile air conditioners to improve human comfort has become increasingly important. In order to improve the thermal comfort of passengers, 3-D flow motion and thermal behavior within vehicles must be analyzed. In this paper, a numerical simulation was used to investigate thermal behavior in a vehicle. Because air temperature at an air vent is related to the cooling capacity of the air conditioner, the cooling capacity was calculated using ɛ-NTU (effective number of transfer unit) theoretical equations. Using the air temperature relationship between inlet and outlet vents as boundary conditions, a 3-D unsteady κ-ɛ turbulent model was used to give a transient analysis simulation of the temperature field and flow conditions in a vehicle’s passenger cabin. Cooling cycle analysis and conjugate heat transfer analysis at the inside surface of the cabin’s ceiling, floor and sides were also considered. The predicted temperature distributions in the vehicles passenger cabin were in good agreement with those obtained experimentally.     

Parameter identification for a LuGre model based on steady-state tire conditions

The purpose of this study was to effectively identify parameters for a LuGre friction model based on experimental measures. In earlier work related to this study (Yang et al., 2009), which was based on the characters of polygonal wear (Sueoka and Ryu, 1997), we showed a frictional vibration model for a mass on a moving belt. This model reflected lateral vibrations caused by velocity and toe-in angle. An important aspect of the present study is the improved friction model. A previous friction model, which divided the process into four parts, expressed the sable excited vibration well but failed to reflect the hysteresis loop change when vehicles accelerated or decelerated continuously. A LuGre friction model can solve this problem, but several model parameters must be obtained experimentally. We measured contact width and length of tires as vertical pressure changed; this provided a theoretical basis for apparent stiffness of a unit of tire tread. Based on tire data from Bakker E’s article in a SAE paper from 1987, we identified the Stribeck exponent and Stribeck velocity in LuGre. Then, the results were implemented in a vibration system that verified the rationality of the data.     

Le transport ferroviaire régional de voyageurs : un processus collectif d’apprentissage

Regional passenger rail services are prevalent in France, as opposed to the more marginal role they play elsewhere in the world. It is indeed at the regional level that reforms have been successfully implemented, probably because the process was gradual and cautious. Initially in 1997, seven regions began experimenting with a decentralized system of regional passenger transportation services. By 2002, all metropolitan regions, with the exception of Corsica and Ile-de-France, were involved. Today we have reached a point where this process can be retrospectively and prospectively assessed. This article is first a retrospective assessment of the role of actors and the emerging dynamic between regional passenger rail transport supply and demand. Then, a prospective evaluation is offered since regionalization is best understood as an ongoing learning process that can be discontinuous or continuous.     

现代机车电传动仿真工具

现代机车动车是一个很复杂的系统,在开发过程中,机械、电子技术和调节技术的专家们必须密切合作.如果既要交换输入数据和结果,又要子系统模型相互直接连接,那么现代仿真工具能极有效地支持这种开发过程.     

生物法处理生活污水脱氮除磷效果分析

通过对铁道部无锡干部培训基地（以下简称培训基地）的生活污水的生物法处理效果观察，探析兼氧／好氧生物处理系统的脱氮除磷原理并对影响处理效果因素进行分析。     

Deep foundation pit excavation procedure optimization considering creep deformation on nearby metro tunnelEI北大核心

Research purposes: The existing researches about excavating procedures of deep foundation pit on nearby metro tunnel in soft formation are lack of systematicness, and creep characteristics of soft clay are not usually taken into consideration. This paper takes Qianhaiwan station of Metro Line 11 in Shengzhen as engineering background and considers creep characteristics in sludge formation. The influence of step excavation in the transversal, longitudinal and vertical directions on the deformation of foundation pit and nearby subway tunnel are simulated, which may be expected to provide theoretical basis for choosing foundation pit excavation procedure of Qianhaiwan station. Research conclusions: (1) The segment far away from tunnel should be excavated firstly when only transversal step excavation was undertaken along the horizontal direction of foundation pit. (2) The maximum horizontal displacement of the piles show exponential relations with the number of segments when step excavation of foundation pit was undertaken in vertical and transversal or longitudinal. If thickness of every step excavation was limited in 1.5~2 m, the horizontal displacement of the pile near tunnel can be reduced about 9 percent when there is no horizontal step excavation. (3) Transversal step excavation with segments far from tunnel excavated firstly was found to be the best step excavation method under the same condition of step number and support, and longitudinal and transversal step excavation followed while longitudinal step excavation was the last. (4) The research results have guiding significance for foundation pit of Qianhaiwan station and similar projects.     

Using a random displacement model to simulate turbulent particle motion in a baroclinic frontal zone: A new implementation scheme and model performance tests

Numerical artifacts can limit accurate simulation of turbulent particle motion when Lagrangian particle-tracking models are implemented in hydrodynamic models with stratified conditions like fronts. Yet, modeling of individual particle motion in frontal regions is critical for understanding sediment dynamics as well as the transport and retention of planktonic organisms. The objective of this research was to develop a numerical technique to accurately simulate turbulent particle motions in a particle-tracking model embedded within a hydrodynamic model of a frontal zone. A new interpolation scheme, the ‘water column profile’ scheme, was developed and used to implement a random displacement model for turbulent particle motions. A new interpolation scheme was necessary because linear interpolation schemes caused artificial aggregation of particles where abrupt changes in vertical diffusivity occurred. The new ‘water column profile’ scheme was used to fit a continuous function (a tension spline) to a smoothed profile of vertical diffusivities at the x–y particle location. The new implementation scheme was checked for artifacts and compared with a standard random walk model using (1) Well Mixed Condition tests, and (2) dye-release experiments. The Well Mixed Condition tests confirmed that the use of the ‘water column profile’ interpolation scheme for implementing the random displacement model significantly reduced numerical artifacts. In dye-release experiments, high concentrations of Eulerian tracer and Lagrangian particles were released at the same location up-estuary of the salt front and tracked for 4 days. After small differences in initial dispersal rates, tracer and particle distributions remained highly correlated (r = 0.84 to 0.99) when a random displacement model was implemented in the particle-tracking model. In contrast, correlation coefficients were substantially lower (r = 0.07 to 0.58) when a random walk model was implemented. In general, model performance tests indicated that the ‘water column interpolation’ scheme was an effective technique for implementing a random displacement model within a hydrodynamic model, and both could be used to accurately simulate diffusion in a highly baroclinic frontal region. The new implementation scheme has the potential to be a useful tool for investigating the influence of hydrodynamic variability on the transport of sediment particles and planktonic organisms in frontal zones.