复杂水流条件下抛石漂移距离的试验研究

抛石漂移是河道治理、护岸、潜丁坝、桥墩防冲等实际工程中经常遇到的问题,依托长江南京以下12.5 m深水航道二期工程口岸直水道整治工程,针对抛石漂移距离在试验室水槽内开展了一系列物理模型试验,对水深、流速、抛高、块石质量及块石形状的不规则等因素对抛石漂距的影响进行了研究;同时在考虑水流流速垂向分布的基础上,通过块石在动水中的受力分析推导出水上抛石漂移距离计算公式,利用模型试验结果拟合出公式中各系数的值,并将其计算结果与模型试验数据和现场观测数据进行比较,结果吻合较好,验证了公式的合理性。     

海洋科考船科考海水系统设计研究

文中主要对海洋科考船科考海水系统的类别、要求、特点进行分析,论述了海洋科考船科考海水系统的设计思路及设计方案,为后期相似系统设计提供参考。     

谐振直流环软开关电路的技术研究

阐述了应用于电压型逆变器的谐振直流环电路的工作原理,给出了其在MATLAB/Simulink中的仿真模型和仿真结果。通过仿真结果得出,谐振直流环电路可实现零电压开通,使开关损耗为零,但是电压u Cr谐振峰值很高,增加了对逆变器开关器件耐压的要求。     

Hybrid model for prediction of bus arrival times at next station

Effective prediction of bus arrival times is important to advanced traveler information systems (ATIS). Here a hybrid model, based on support vector machine (SVM) and Kalman filtering technique, is presented to predict bus arrival times. In the model, the SVM model predicts the baseline travel times on the basic of historical trips occurring data at given time‐of‐day, weather conditions, route segment, the travel times on the current segment, and the latest travel times on the predicted segment; the Kalman filtering‐based dynamic algorithm uses the latest bus arrival information, together with estimated baseline travel times, to predict arrival times at the next point. The predicted bus arrival times are examined by data of bus no. 7 in a satellite town of Dalian in China. Results show that the hybrid model proposed in this paper is feasible and applicable in bus arrival time forecasting area, and generally provides better performance than artificial neural network (ANN)–based methods. Copyright © 2010 John Wiley & Sons, Ltd.     

九曲河大桥加固工程施工监控技术研究

桥梁施工监控在桥梁建设及加固改造工程中是必不可少的一部分,监控可以对桥梁线形及内力、挠度情况进行实时反馈,严格把关,保证与设计一致。文章以九曲河大桥加固工程为背景,结合加固改造设计方案,从线形控制、变形监测与应力监测等方面阐述了施工监控技术及效果。     

胶粉与SBS改性沥青混合料路用性能对比及质量控制

室内实验对胶粉与SBS改性沥青混合料路用性能进行对比分析,得出胶粉改性沥青混合料低温性能、水稳定性均优于普通SBS改性沥青混合料,高温性能与普通SBS改性沥青混合料相当。通过对改性沥青路面施工工艺分析,得出初压温度在施工中重要性。     

Large-scale evacuation network optimization: a bi-level control method with uncertain arterial demand

To improve the efficiency of large-scale evacuations, a network aggregation method and a bi-level optimization control method are proposed in this paper. The network aggregation method indicates the uncertain evacuation demand on the arterial sub-network and balances accuracy and efficiency by refining local road sub-networks. The bi-level optimization control method is developed to reconfigure the aggregated network from both supply and demand sides with contraflow and conflict elimination. The main purpose of this control method is to make the arterial sub-network to be served without congestion and interruption. Then, a corresponding bi-objective network flow model is presented in a static manner for an oversaturated network, and a Genetic Algorithm-based solution method is used to solve the evacuation problem. The numerical results from optimizing a city-scale evacuation network for a super typhoon justify the validity and usefulness of the network aggregation and optimization control methods.     

Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

The identification and empirical characterization of vehicular (Lagrangian) fundamental diagrams in multilane traffic flow

Traditional macroscopic traffic flow modeling framework adopts the spatial–temporal coordinate system to analyze traffic flow dynamics. With such modeling and analysis paradigm, complications arise for traffic flow data collected from mobile sensors such as probe vehicles equipped with mobile phones, Bluetooth, and Global Positioning System devices. The vehicle‐based measurement technologies call for new modeling thoughts that address the unique features of moving measurements and explore their full potential. In this paper, we look into the concept of vehicular fundamental diagram (VFD) and discuss its engineering implications. VFD corresponds to a conventional fundamental diagram (FD) in the kinematic wave (KW) theory that adopts space–time coordinates. Similar to the regular FD in the KW theory, VFD encapsulates all traffic flow dynamics. In this paper, to demonstrate the full potential of VFD in interpreting multilane traffic flow dynamics, we generalize the classical Edie's formula and propose a direct approach of reconstructing VFD from traffic measurements in the vehicular coordinates. A smoothing algorithm is proposed to effectively reduce the nonphysical fluctuation of traffic states calculated from multilane vehicle trajectories. As an example, we apply the proposed methodology to explore the next‐generation simulation datasets and identify the existence and forms of shock waves in different coordinate systems. Our findings provide empirical justifications and further insight for the Lagrangian traffic flow theory and models when applied in practice. Copyright © 2015 John Wiley & Sons, Ltd.