Economic policies and seaports: Are port authorities necessary?

This paper first presents arguments for having public sector port authorities. They can deal, flexibly and permanently, with property rights within their own areas. They can plan and regulate port areas comprehensively. They can provide 'public goods'. They can deal, in various ways, with externalities. They can promote efficiency, whether their own (if they operate as a comprehensive port) or that of the private sector (if they are largely landlords). For example, if their policy is to rely on the private sector to produce efficiency through competition then they can see to it that there actually is competition and not any kind of cartel or monopoly. Examples are cited where this last function has not been performed. The exception for single-user ports is noted.

Against them are the general disadvantages of public authorities (or bureaucracies)—though examples are cited where port authorities had very small staffs. The common instances of 'market failure' may thus be contrasted with those of 'government failure'. Finally, a pragmatic approach is advocated, tailored to the needs and resources of the country in question. The increasing effect of the economies of scale in port technology, and its limitation on competition, is, however, noted and to be discussed in the next paper.     

Wanting to travel,more or less: Exploring the determinants of the deficit and surfeit of personal travel

This study investigates the determinants of peoples desire to increase or decrease the amount of travel they do. We use data from 1,357 working commuters, residents of three different neighborhoods in the San Francisco Bay Area, California. The dependent variables are indicators of Relative Desired Mobility for ten categories of travel (short- and long-distance overall and by several mode- and purpose-specific categories). These variables are measured on a five-point ordinal scale ranging from much less to much more, through which the respondents indicated the amount of travel they want to do (in the category in question) compared to what they are doing now. Censored ordered probit models were developed for these variables, with explanatory variables including general travel attitudes, specific liking for travel in each of the same separate categories, objective and subjective measures of the amount currently traveled in each category, and personality, lifestyle, and socio-demographic characteristics. The results support the hypotheses that the liking for travel has a strong positive impact, and subjective qualitative assessments of mobility have a strong negative impact, on the desire to increase ones travel. Finally, a number of general types of effects on Relative Desired Mobility were identified, among them complementarity and substitution effects. The results of this study can provide policy makers and researchers with new and valuable insight into key principles that affect individual travel demand.     

Spatially Prioritizing Seafloor Mapping for Coastal and Marine Planning

Coastal and marine areas provide vital services to support the economic, cultural, recreational, and ecological needs of human communities, but sustaining these benefits necessitates a balance between growing and often competing uses and activities. Minimizing coastal zone conflict and reducing human-induced impacts to ecological resources requires access to consistent spatial information on the distribution and condition of marine resources. Seafloor mapping provides a detailed and reliable spatial template on the structure of the seafloor that has become a core data need for many resource management strategies. The absence of detailed maps of the seafloor hinders the effectiveness of priority setting in marine policy, regulatory processes, and marine stewardship. For large management areas, the relatively high cost of seafloor mapping and limited management budgets requires careful spatial prioritization. In order to address this problem, a consensus based approach, aided by decision-support tools, and participatory geographic information systems (GIS), was implemented in Long Island Sound to spatially prioritize locations, define additional data collection efforts needed, and identify products needed to inform decision-making. The methodology developed has utility for other states and regions in need of spatially prioritizing activities for coastal planning, and organizations charged with providing geospatial services to communities with broad informational needs.     

Selection of techniques for reducing shipping NOx and SOx emissions

This paper develops a subjective generic methodology for providing ship owners with a transparent evaluation tool for selecting their preferred NOx and SOx control techniques. We quantitatively analyse the merits of the control methods available in marine air pollution control practice using data collected from shipping companies, shipyards and maritime academies. We also prioritize the applicable control techniques with respect to operational shipping environments.     

Robust design optimization of suspension system considering steering pull reduction

This paper presents robust design optimization method to reduce steering pull phenomenon. One of the biggest causes of steering pull phenomenon is tolerance of suspension system such as hard point, spring, damper and bush. Therefore, the relationship between suspension systems and steering pull phenomenon has as nonlinear characteristics. But, it can be very difficult to evaluate the analytical design sensitivity. Thus, it is impossible to directly apply a well-developed optimization algorithm based on gradient information. To avoid these difficulty, this study uses sequential approximation optimization process based on a meta-model. The robust design process has 28 random design variables with tolerance. For efficient design process, the sample variances for the design goals are approximated from meta-models. The proposed approach required only 62 evaluations until it converged. Optimal design reduced the drift by 80% and its deviation by 38.7%, respectively. This result proves that the suggested design method of suspension system is effective and useful.     

Effect of fuel choice on nanoparticle emission factors in LPG-gasoline bi-fuel vehicles

Nanoparticle and gas-phase emission factors are presented for a liquefied petroleum gas (LPG) passenger vehicle and are compared to gasoline operation. A bi-fuel LPG-gasoline vehicle certified for use on either fuel was used as the test vehicle so that a direct comparison of the emissions could be made based on fuel choice. These values were considered along with previous studies to determine the relative change in particulate emissions due to fuel choice over a wide range of vehicles and operating conditions. The vehicle examined in this study was tested on a chassis dynamometer for both steadystate and transient conditions. Transient test cycles included the US FTP72 driving cycle, Japanese driving cycle and modified Indian driving cycle while steady-state tests were done at vehicle speeds ranging from 10–90 km/hr in various transmission gears. Exhaust particle size distributions were measured in real-time using a differential mobility spectrometer (DMS50), and particle number and particle mass emission factors were calculated. For both fuels, the majority of the particles ranged from 5 to 160 nm in terms of particle diameter, with typically more than 85% of the particles in the nucleation mode (between 5–50 nm). In most cases, the vehicle produced a greater fraction of larger (accumulation mode) particles when fuelled on LPG. Using the data in the literature as well as the data in the current study, gasoline fuel produces 4.6 times more particles in terms of number and 2.1 times more particles in terms of mass.     

A schedule‐based dynamic transit network model — Recent advances and prospective future research

Using the schedule‐based approach, in which scheduled timetables are used to describe the movement of vehicles, a dynamic transit assignment model is formulated. Passengers are assumed to travel on a path with minimum generalized cost that consists of four components: in‐vehicle time; waiting time; walking time; and a time penalty for each line change. A specially developed branch and bound algorithm is used to generate the time‐dependent minimum path. The assignment procedure is conducted over a period in which both passenger demand and train headway are varying. This paper presents an overview of the research that has been carried out by the authors to develop the schedule‐based transit assignment model, and offers perspectives for future research.     

Late Holocene history of the rainfall in the NW Iberian peninsula—Evidence from a marine record

This study reconstructs climatic variability over the last 4700 yr in the NW Iberian Peninsula on the basis of lithological, sedimentological, biogeochemical, micropaleontological (diatoms and biosiliceous compounds) and AMS ¹⁴C analyses conducted in a gravity core retrieved from the Galician continental shelf. The core was recovered at the Galicia Mud Patch, a muddy sedimentary body highly influenced by the terrestrial supply of the Miño and Douro rivers, and thus controlled by the rainfall variations over the catchment area. River plume transports the lithogenic and continental-derived compounds to the shelf area allowing us to recognize several periods of terrestrial/marine influence. These periods are well correlated with the lithological units identified. Coarser sediments, high values of Ca/Al, low values of Fe, Al and lithogenic Si (LSi) are representative of the marine-influenced periods. These stages are related to dry conditions and winds coming from the NE under a NAO positive-like phase.Terrestrial-influenced stages are characterized by muddy sediments, with high content of Fe, Al and LSi, freshwater and benthic diatoms, continental-derived organisms (crysophycean cysts and phytoliths) and high amount of land-derived organic matter as reported by the C/N ratios. The influence of NAO positive- and NAO negative-like periods and solar activity are the two mechanisms quoted to explain the climatic variability during the last 4700 years.Proxies for the lithogenic input and terrigenous content (non-organic material) show an increase at around 2000–1800 cal. yr BP, linked to the warmer conditions and high precipitation patterns during the Roman Warm Period, and soil erosion due to forest degradation and other anthropic activities. A strong river flow event is recorded in shelf sediments during 800–500 cal. yr BP. A pervasive NAO negative-like period, and the high irradiance registered during the Grand Solar Maximum (GSM) controlled the precipitation and induced a high run-off and riverine influx during this event.