Fuel economy comparison of conventional drive trains series and parallel hybrid electric step vans

A hybrid electric vehicle (HEV) is a vehicle that combines a conventional propulsion system with an on-board rechargeable energy storage system to achieve better fuel economy than a conventional vehicle HEVs do not have limited ranges like battery electric vehicles, which use batteries charged by an external source. The different propulsion power systems may have common subsystems or components. The objective of this study is to compare the fuel economies of a conventional step van, a series hybrid electric step van (HESV), and a parallel HESV by calculating the fuel consumption using the ADVISOR software by NREL. We also showed the results of the vehicles in different driving cycles including the Central Business District bus cycles, the New York City Cycle, and the US EPA City and Highway cycles.     

Association rule learning to improve deficiency inspection in port state control

ABSTRACT

The inspection of foreign ships in national ports is a critical measure in port state control (PSC), preventing substandard ships from entering national ports. Multifarious inspection items, limited inspection time and inspector manpower are challenging PSC inspection. This research applies data mining to analyze historical PSC inspection records in Taiwan’s major ports to extract potential valuable information for PSC onboard inspections. Using the Apriori Algorithm, the analysis identifies many useful association rules among PSC deficiencies in terms of specific ship characteristics, such as ship types, societies, and flags. The general rules identified show that the items ‘Water/Weathertight conditions’ and ‘Fire safety’ are significantly related. Besides, in the analysis of the various ship types, several different rules are found. After comparing the analysis of ship types and ship societies, it can be observed that the association rules for specific ship types, such as oil tankers, have a better effect than those for individual ship societies do. These identified rules can not only help inspectors effectively spot the associated deficiencies, but also improve the efficiency of PSC inspection. The ports other than Taiwan’s ports can apply a similar analysis method to identify corresponding association rules suitable for their own inspections.     

Characterization and evolution of spatial density patterns in urban areas

This paper examines the spatial patterns of population density, household automobile ownership and other socio-demographic variables that affect urban travel, as a function of distance from the central city core. Spatial density functions provide a useful characterization of urban structure, and of its evolution when taken at different time intervals. Analysis of the data from four case cities (Austin, Atlanta, Dallas, Phoenix) for 1960, 1970 and 1980 reveals continuing overall dispersion away from the traditional central core, accompanied by the densification of formerly low-density suburbs. This presents implications for high congestion levels in the densifying suburban communities, comparable to those typically associated with the CBD. In addition, the analysis has captured the continuing growth of average household automobile ownership and revealed a distinct spatial pattern that seems to be robust across the case areas considered, as well as within radial corridors in the one case that was so analyzed (Austin).List of symbols Y gross population density in census tractt - X _t distance in miles from the center of tract to the CBD - parameter representing the central business district density - y density gradient parameter - X₀, X₁, X2, and X3 locations of the knots in a three segment division of the x-axis - D_i dummy variable defined for thei-th segment - ₁ normally distributed disturbance term,a _i,b _i,c _i,d _i,i = 1, 2, 3 — parameters to be estimated - A _t area of census tractt     

Comparison analysis for subjective and objective weights of financial positions of container shipping companies

This paper explores the positions of financial ratios identified utilizing both subjective and objective weighting methods—the consistent fuzzy preference relation (CFPR) and entropy—based on questionnaires collected from experts and the financial statements of major shipping companies in Taiwan and Korea. The comparison of perceptions of financial ratios by country and by expert group illuminates some financial aspects that experts may have ignored or not paid close attention to during the business operating process, especially in today’s turbulent world shipping market. The major results of this paper show that experts in the two countries have different perceptions of the debt-to-equity ratio and that by combining the results of objective and subjective weights, categorization of financial ratios by quadrant can help decision-makers find business options and strategies to improve the financial performance of their companies. This research approach may be applied to other business entities, improving on the direct rating method used in previous studies.     

Mean Value WGT Diesel Engine Calibration Model for Effective Simulation Research

Recently, to improve vehicle fuel economy, as well as the performance of internal combustion engines, optimized system matching between a vehicle’s drivetrain and engine has become a very important technical issue. For this reason, the need for simulation research on engine and vehicle performance improvement has increased. But in general, since both engine simulation and vehicle simulation require initial engine calibration map input, a simple engine calibration method is required for the efficient configuration of various virtual engine calibration map setups. On this background, in this study, an example of waste gate turbocharger (WGT) cooled — exhaust gas recirculation (EGR) Diesel engine calibration using a test-based mean value engine model is presented as a suitable engine calibration map setting method. Also, the feasibility of an engine calibration model is confirmed through various engine tests. Using the simple model presented here, it is possible for diverse engine operating conditions and engine performance maps to be acquired.     

Requirement-based testing of an automotive ECU considering the behavior of the vehicle

HILS (Hardware In the Loop Simulation) and RBT (Requirement-Based Testing) are widely used to evaluate the performance and reliability of automotive ECUs (Electronic Control Units). The HILS method is used to predict the behavior of ECU-installed vehicles and to evaluate the performance of ECU controllers. RBT evaluates whether the embedded system satisfies the pre-defined requirements. In this study, the behavior of a vehicle is regarded as a system requirement, and an embedded system test procedure that evaluates the system requirement is proposed. In particular, a new method is introduced, which integrates HILS with RBT. Using the proposed method, the behavior of an articulated vehicle equipped with an AWS (All Wheel Steering) ECU is evaluated with RBT software.     

Robust optimization for emergency logistics planning: Risk mitigation in humanitarian relief supply chains

This paper proposes a methodology to generate a robust logistics plan that can mitigate demand uncertainty in humanitarian relief supply chains. More specifically, we apply robust optimization (RO) for dynamically assigning emergency response and evacuation traffic flow problems with time dependent demand uncertainty. This paper studies a Cell Transmission Model (CTM) based system optimum dynamic traffic assignment model. We adopt a min–max criterion and apply an extension of the RO method adjusted to dynamic optimization problems, an affinely adjustable robust counterpart (AARC) approach. Simulation experiments show that the AARC solution provides excellent results when compared to deterministic solution and sampling based stochastic programming solution. General insights of RO and transportation that may have wider applicability in humanitarian relief supply chains are provided.     

Long-term behavior of particulate matters at urban roadside and background locations in Seoul,Korea

The concentrations of particulate matter, PM_2.5, PM₁₀, and TSP at an urban roadside and an urban background station are analyzed. Data collected over a 10 year period are analyzed. The concentrations of the particulates measured at the urban site are systematically larger than at the background station. The mean PM values at the former also exhibit a slight fall over the decade unlike those at the background station. Overall, the particulate matters at both locations are in an intermediate range of global level, e.g., approximately two times lower than those in other Asian regions but higher than in Europe.     

Observer Design for Semi-Active Suspension Control

This paper presents an observer for automotive semi-active suspension control. Automotive suspensions are disturbance affected dynamic systems and semi-active suspensions can be represented as a bilinear model. An observer for semi-active suspensions is formulated such that the estimation error is independent of unknown external disturbance. The proposed observer uses easily accessible measurements such as accelerations and guarantees exponentially convergent state estimation for suspension deflections and velocities. Absolute sprung mass and unsprung mass velocities can be estimated using the proposed observer. Simulations and experimental rig tests show that all states of a semi-active suspension can be estimated only with acceleration measurements. The estimated states are used to improve ride quality in a semi-active suspension.     

Toward the betterment of risk allocation: Investigating risk perceptions of Australian stakeholder groups to public-private-partnership tollroad projects

This paper presents a qualitative assessment of the risk perceptions held by key Australian stakeholder groups in the context of tollroads operated under the public-private-partnership model. The findings confirm that experience accumulated in recent years has contributed toward the betterment of risk-sharing optimisation amongst the contracting parties. The knowledge acquired through in-depth interviews supports the common view that equitable risk sharing is the vital ingredient of value for money. The proposition that the private sector is better equipped to manage commercial risks involving economic decision making whilst risks that have embedded unquantifiable social and public values and those in the domain of public governance are best left with government alone, appears to be replete with refutable implications. Public perception is a malleable concept and should be managed by both sectors.