火控系统发展方向及亟待研究的几个问题

本文针对现代高技术条件下局部战争对火控系统提出的更新更高的要求，分析探讨了21世纪火控系统发展方向及其亟待研究的几个问题。     

微机联锁远程故障诊断系统的研究

作者论述了微机联锁远程故障诊断系统的构成和实现,提出现阶段信号维修改革的任务、组织管理、及实施远程故障诊断系统的关键技术。     

船舶工业发展与战略性人力资源管理的思考

文章通过中国船舶工业发展趋势的描述,针对近期船舶工业发展的特点,通过对战略性人力资源管理的理解.提出适应我国船舶工业发展应对措施和建议.     

Effects of Test Conditions on Fuel Economy of Gasoline-Powered Vehicle

In this study, the influence on fuel economy testing of gasoline-powered vehicles is evaluated for various test conditions (e.g., laboratory temperature, soaking time, cooling fan, battery charge state, and driving mode tracking). It showed a difference in fuel economy results of approximately 3 % between low (88 %) and high (99 %) battery state of charge conditions because the alternator saving function has a positive effect on fuel economy. Fuel economy testing with laboratory temperature changes gave a slight reduction at 21 °C and slight increase at 29 °C. The cooling fan changes had an almost negligible effect on fuel consumption. The largest fuel economy result varied by 5.2 % in the soft, standard, and rough driving conditions.     

Disturbance Observer-Based Sideslip Angle Control for Improving Cornering Characteristics of In-Wheel Motor Electric Vehicles

In this paper, a robust sideslip angle controller based on the direct yaw moment control (DYC) is proposed for in-wheel motor electric vehicles. Many studies have demonstrated that the DYC is one of the effective methods to improve vehicle maneuverability and stability. Previous approaches to achieve the DYC used differential braking and active steering system. Not only that, the conventional control systems were commonly dependent on the feedback of the yaw rate. In contrast to the traditional control schemes, however, this paper proposes a novel approach based on sideslip angle feedback without controlling the yaw rate. This is mainly because if the vehicle sideslip angle is controlled properly, the intended sideslip angle helps the vehicle to pass through the corner even at high speed. On the other hand, the vehicle may become unstable because of the too large sideslip caused by unexpected yaw disturbances and model uncertainties of time-varying parameters. From this aspect, disturbance observer (DOB) is employed to assure robust performance of the controller. The proposed controller was realized in CarSim model described actual electric vehicle and verified through computer simulations.     

天津滨海快轨车辆空调系统

介绍天津滨海快轨车辆空调系统的构成、配置方案、系统控制、工作特性、工作模式以及相关参数和制冷负荷的计算。     

公路泥石流防治工程施工指南（Ⅰ）

作者根据多年来对公路泥石流的研究成果积累,编制了与所编制的《公路泥石流防治工程设计指南》相匹配的《公路泥石流防治工程施工指南》(以下简称《施工指南》).《施工指南》包括九部分,即总则和施工前的准备,以及速流结构、底埋隧道、拦渣坝、护岸结构、导流堤、翼型墩汇流结构、渡槽及糙底群桩等核心技术的施工.本文介绍了总则、施工前的准备、速流结构及底埋隧道的施工技术条文,为公路泥石流防治工程施工提供了重要技术借鉴,也为公路建设及养护相关技术规范的修改提供了重要依据.     

飞跃的轨迹—龙口港海盛集装箱公司发展再上新台阶

龙口港海盛集装箱有限公司继去年完成进出口箱量50000标准箱后,今年上半年生产经营又呈现出强劲的发展势头.6月4日、9日,龙口-天津-锦州-蛇口-黄埔、龙口-新加坡-巴生-雅加达-三宝垄-泗水2条直达航线相继开通.     

环北部湾发展重化工港口经济的SWOT分析

将环北部湾地区发展重化工等港口经济的内部优势、劣势、机会和威胁等,通过调查列举出来,然后用系统分析的思想,把各种因素相互匹配起来加以分析,最后文章提出了发展环北部湾地区重化工港口经济的建议。     

基于仿真技术的高墩桥施工全过程稳定分析

薄壁高墩大跨连续刚构桥跨越能力大、造价合理、设计和施工技术成熟,近年来被广泛应用,但是其结构普遍采用高强材料和薄壁结构并且墩高越来越高,使得稳定问题显得非常突出,本文以河南省西部济邵高速上的逢石河特大桥为工程背景,利用Midas有限元软件进行数值模拟仿真,对其施工全过程进行了稳定分析,计算结果表明各种工况下桥墩都满足稳定性要求,用Midas有限元软件适用于桥梁计算分析,给出的结构模型仿真方法及分析结果对该类桥的稳定性计算提供了参考依据。