低碳环境下车辆路径问题研究

车辆路径问题(VRP)是供应链管理中的关键问题,同时环境问题又是物流领域亟待解决的主要问题之一,所以在研究VRP过程中结合当前环境是研究低碳运输的重要方式。为实现低碳运输,文中计算油耗时考虑了车辆的载重和车速,并以最少成本作为目标函数对VRP进行研究,建立数学模型,对传统的人工蜂群算法进行改进,最后通过matlab软件进行仿真实验。     

大倾角中厚煤层软弱顶底板柔性护巷技术

在大倾角中厚煤层沿空留巷中,以往的支护方式难以满足大倾角中厚煤层巷道特殊的围岩结构稳定的需要,同时无法适应工作面内矸石垮落造成留巷困难。文章针对这一难题,首次提出并采用了"柔性护巷"技术,通过利用巷道上帮形成的由垮落矸石堆积在特制钢筋网上的"包护带",允许巷道顶板有一定的下沉量,从而使矸石充分为巷道顶板组合岩梁结构提供支撑力。在总结其施工工艺的基础上,通过现场试验,研究了巷道矿压显现规律、顶板移动规律、矸石垮落堆积规律和钢筋网变形规律;实验结果表明,在利用锚、网、索、支柱联合支护的基础上,应用"柔性护巷"技术能有效地解决大倾角中厚煤层沿空留巷技术难题。     

熔融石英砂动力特性动三轴试验

为探究振动荷载作用下熔融石英砂液化破坏过程中动变形和动强度变化规律, 促进透明土技术在岩土工程动力特性可视化模型试验中的推广和应用, 对构成透明砂土骨架结构的典型粒径(0.5~1.0 mm)熔融石英砂开展饱和试样动三轴试验; 研究了不同围压、加载频率和动应力比等试验条件下熔融石英砂试样的累积轴向应变、动孔压发展模式、动应力衰减、动弹性模量和阻尼比的变化规律, 并将试验结果与相同级配的标准砂进行了对比。分析结果表明: 熔融石英砂累积轴向应变随动应力比的增大呈现出由稳定型向破坏型转变的趋势, 加载频率为0.5~1.5 Hz时, 临界动应力比为0.150~0.175, 小于标准砂的0.200~0.225;升高围压、增大动应力比、降低加载频率会加快试样塑性应变累积, 缩短液化破坏时间; 熔融石英砂孔压发展模式随围压增大逐渐由Seed孔压模型向指数型过渡, 增大加载动应力会加剧液化破坏后孔压的振动幅度; 相同动应力比下, 熔融石英砂与标准砂的动应力与动应变呈现线性相关, 在围压大于200 kPa时, 二者动应力衰减幅度随围压的增大而逐渐减小; 熔融石英砂的动弹性模量和阻尼比表现为线性关系, 动弹性模量随动应变的增大呈现出双曲线型减小的趋势, 并随围压的增大而增大; 阻尼比随动应变的增加先增大后基本稳定在0.22, 发展曲线受围压影响较小。      

Development of knowledge based body structure concept design model

The purpose of this study is to propose a concept design process for an automotive body structure using technical information on the major joints and members of vehicles. First, in order to collect the technical information on major joints and members, 17 vehicles were selected using benchmark data. The collected technical information for the selected vehicles was the cross sectional shapes of each joint and member which were used for the analysis of joint stiffness, crashworthiness and static stiffness of the member to make a database along with cross section properties. This study applied a ‘What If Study’ technique to perform a concept design of an automotive body using the analyzed information and selected cross section meeting the design objectives. The criteria for the selection of the cross section were defined by subdividing the defined design objectives of an automotive body structure and constraints into members and joints. In order to configure an analysis model of an automotive body structure using the selected cross section, a shape parametric model was used and static stiffness, dynamic stiffness and crashworthiness were assessed to evaluate the configured automotive body structure. The evaluation result showed that the crashworthiness and static/dynamic stiffness were improved compared to an existing body structure. In addition, the weight of the body structure was reduced. Through this study, the process that can rapidly and effectively derive and evaluate the concept design of an automotive body structure was defined. It is expected that, henceforth, this process will be helpful for the study of automotive body structures.     

Occupant injury risk analysis at NASS/CDS database

Injury information for vehicle occupants from the body regions of the head, thorax, abdomen, and upper and lower extremities, due to the restraints and interior parts of the vehicle, were extracted from the 2009 ~ 2012 NASS/CDS database. For those cases with high occurrence frequency, a detailed and comprehensive data analysis was performed to find the relationship between the accident, occupant, vehicle, and injury data. A numerical frontal impact sled model with the Hybrid III dummy and the GHBMC human body model was constructed to simulate and identify those injury risks according to NASS/CDS. Among the 5,734 injuries to the aforementioned body regions from frontal crashes are, listed by frequency of occurrence, the lower extremity (27.8 %), upper extremity (21.3 %), thorax (15.1 %), face (10.9 %), spine (8.7 %), head (7.3 %), and abdomen (6.9 %). The main injury sources to the head were the windshield, side structure, and steering wheel. For the thorax and abdomen they were the seat belt and steering wheel. For the lower extremity it was the instrument panel. The main injury patterns for the head were the concussion and the contusion. For the thorax they were vessel laceration and lung contusion. For the abdomen they were laceration and contusion of the organs. For the lower extremity they were bone fracture and ligament rupture. The steering wheel and seat positions were main factors affecting head and thorax injury risks. From the sled impact simulation, high injury risks of the head and thorax were assessed respectively at conditions of steering column tilt down and rear most seat position, which correlated well with the findings from the NASS/CDS data analysis.     

高校图书馆的人力资源管理略论

文章分析了当前高校图书馆人力资源管理存在的问题,对加强人力资源管理的必要性提出了看法,并就加强人力资源管理的有效途径进行了探讨。     

彩色多普勒超声在动态监测移植肝及其并发症中的应用

目的探讨彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中的应用价值。方法回顾我中心107例原位肝移植术后应用彩色多普勒超声资料,汇总后行统计学分析。结果肝移植术后早期门脉流速较正常对照组升高,而肝动脉流速降低,后逐渐恢复正常。107例中发现肝动脉血栓形成2例(1.87%),肝动脉狭窄5例(4.67%),门脉血栓形成3例(2.80%),肿瘤复发7例(6.54%),诊断为急性排斥反应18例次(16.82%),慢性排斥反应10例次(9.34%),胸腔积液105例(98.13%),腹腔积液65例(60.74%),假性动脉瘤1例,胰漏1例,胆道感染4例(3.74%),胆道狭窄4例(3.74%),胆漏5例(4.67%),胆总管结石1例。结论彩色多普勒超声在动态监测肝移植术后血流动力学变化及并发症诊治中具有重要的临床意义。     

NT4-Ant-Shepherdin[79-87]融合基因重组载体的构建

目的设计构建携带NT4-Ant-Shepherdin[79-87]的cDNA融合基因的重组载体,为针对Survivin的靶向治疗奠定基础。方法应用非对称引物/模板法、PCR技术制备NT4-Ant-Shepherdin[79-87]cDNA片断,连接于pGEM-T-Easy载体,经克隆测序、酶切后与PBV220/NT4质粒连接;转化感受态细胞E.coliDH5α,亚克隆获得NT4-Ant-Shepherdin[79-87]融合基因。结果克隆出Ant-Shepherdin[79-87]基因,经酶切及测序证实结果正确;连接PBV220/NT4,经克隆、酶切,琼脂糖凝胶电泳证实获得321bp的NT4-Ant-Shepherdin[79-87]目的基因片断。结论通过分子生物学技术成功构建了携带NT4-Ant-Shepherdin[79-87]融合基因的重组载体,为进一步研究针对Survivin的靶向抗肿瘤作用奠定了基础。     

有限供给条件下的深圳大鹏交通出行链研究

大鹏城郊旅游交通组织是深圳城市交通不可回避的问题。在大鹏新区成立的当下,城市开发的冲动催生交通基础设施建设规模有不断提升的趋势,势必与大鹏"保护为先"的发展思路产生对立,大鹏的交通何去何从?从梳理不同城区功能发展诉求下交通出行链构建角度,探寻有限供给下的新区交通系统构建方式。     

超巴拿马型集装箱船球艏型线优化研究

为获得更优的EEDI指数,实现油耗降低,要求集装箱船型线设计方案在不同的速度点均满足阻力较优。以一艘超巴拿马型集装箱船为研究对象,在人工优化后型线基础上,利用数值优化集成系统,采用最优化技术、自由变形技术(FFD)和计算流体力学技术(CFD),对船体首部型线进一步优化。要在设计吃水下15~21kn速度段内,达到降低阻力的目的。模型试验和数值计算均证实这一多速度点数值优化比较成功。