The impact of planned disruptions on rail passenger demand

Transportation - Disruptions to rail journeys are experienced by rail passengers on a daily basis throughout the world, with the impacts on passengers ranging from minimal to major. Such...     

���зֲ�����Ϣ��ģ��

熵最大化方法被广泛应用于交通规划，为交通需求预测模型提供了理论依据.本文使用信息论中的熵概念描述居民出行分布，并根据最大信息熵理论提出了基于原点矩典型特征量约束条件下的出行分布模型，详细阐述了模型中各个参数的实际含义，该模型是一个普适性模型，其具体形式决定于最高阶原点矩阶数的取值，此值对模型精度及参数标定难易程度有重要影响.为确定模型参数，提出了实用的参数标定方法.由于模型中原点矩的最高阶数对模型精度有较大影响，为找到两者之间的关系，利用长春市出行调查数据研究了四种出行方式分别时应于五种原点矩最高阶数的模型拟合情况.因文中所建立的模型是一系列模型，为比较其描述问题的优劣差异，按照最大信息熵原理给出了确定系统分布的熵方法，并运用该方法对前述模型进行了比较.调查数据的验证结果表明，出行分布的信息熵模型可以正确地描述出行分布规律，熵方法可以简单有效地评价不同模型对同一问题描述的优劣差异.本文提出的熵模型和熵方法对城市交通规划具有指导意义.     

列车运行与优化系统的设计

随着世界能源消耗的逐年增长,燃油的节省技术越来越受到重视。本文就GE公司运输系统集团的新一代节油产品列车运行与优化系统设计展开讨论,针对软件模块功能进行介绍,也汇总了在全球应用的现状,最后展望了在中国应用的未来。     

Dual objective active suspension system based on a novel nonlinear disturbance compensator

This paper proposes an active suspension system to fulfil the dual objective of improving ride comfort while trying to keep the suspension deflection within the limits of the rattle space. The scheme is based on a novel nonlinear disturbance compensator which employs a nonlinear function of the suspension deflection. The scheme is analysed and validated by simulation and experimentation on a laboratory setup. The performance is compared with a passive suspension system for a variety of road profiles.     

Practicability study on the suitability of artificial,neural networks for the approximation of unknown steering torques

For steer-by-wire systems, the steering feedback must be generated artificially due to the system characteristics. Classical control concepts require operating-point driven optimisations as well as increased calibration efforts in order to adequately simulate the steering torque in all driving states. Artificial neural networks (ANNs) are an innovative control concept; they are capable of learning arbitrary non-linear correlations without complex knowledge of physical dependencies. The present study investigates the suitability of neural networks for approximating unknown steering torques. To ensure robust processing of arbitrary data, network training with a sufficient volume of training data is required, that represents the relation between the input and target values in a wide range. The data were recorded in the course of various test drives. In this research, a variety of network topologies were trained, analysed and evaluated. Though the fundamental suitability of ANNs for the present control task was demonstrated.     

Application of a modified thermostatic control strategy to parallel mild HEV for improving fuel economy in urban driving conditions

A modified thermostatic control strategy is applied to the powertrain control of a parallel mild hybrid electric vehicle (HEV) to improve fuel economy. This strategy can improve the fuel economy of a parallel mild HEV by operating internal combustion engine (ICE) in a high-efficiency region. Thus, in this study, experiments of a parallel mild HEV were conducted to analyze the characteristics of the hybrid electric powertrain and a numerical model is developed for the vehicle. Based on the results, the thermostatic control strategy was modified and applied to the vehicle model. Also, battery protection logic by using electrochemical battery model is applied because the active usage of battery by thermostatic control strategy can damage the battery. The simulation results of the vehicle under urban driving conditions show that the thermostatic control strategy can improve the vehicle’s fuel economy by 3.7 % compared with that of the conventional strategy. The results also suggest that the trade-off between the fuel economy improvement by efficient ICE operation and the battery life reduction by active battery usage should be carefully investigated when a thermostatic control strategy is applied to a parallel mild HEV.     

Automobile aerodynamics influenced by airfoil-shaped rear wing

Computational model is developed to analyze aerodynamic loads and flow characteristics for an automobile, when the rear wing is placed above the trunk of the vehicle. The focus is on effects of the rear wing height that is investigated in four different positions. The relative wind incidence angle of the rear wing is equal in all configurations. Hence, the discrepancies in the results are only due to an influence of the rear wing position. Computations are performed by using the Reynolds-averaged Navier-Stokes equations along with the standard k-ε turbulence model and standard wall functions assuming the steady viscous fluid flow. While the lift force is positive (upforce) for the automobile without the rear wing, negative lift force (downforce) is obtained for all configurations with the rear wing in place. At the same time, the rear wing increases the automobile drag that is not favorable with respect to the automobile fuel consumption. However, this drawback is not that significant, as the rear wing considerably benefits the automobile traction and stability. An optimal automobile downforce-to-drag ratio is obtained for the rear wing placed at 39 % of the height between the upper surface of the automobile trunk and the automobile roof. Two characteristic large vortices develop in the automobile wake in configuration without the rear wing. They vanish with the rear wing placed close to the trunk, while they gradually restore with an increase in the wing mounting height.     

A Practical Model for Deformation Prediction of Highway Subgrade Soils

This paper reports a practical constitutive relation for highway subgrade soils. The proposed model is derived based on the laboratory repeated-load testing of four subgrade soils. Statistical parameters generally used in the power model of subgrade permanent strain are expanded into material constants with engineering significance. The constitutional relation reported in this paper can be used in the mechanistic-based pavement design of highway flexible pavements and railroad tracks.     

隧道三维激光扫描测算一体化技术方案与实践北大核心CSCD

三维激光扫描技术已在隧道工程中得到广泛应用,但其内外业脱节、人工操作过多、实时性不足等问题日益凸显。文章结合工程实践,提出三维激光隧道扫描测算一体化技术方案,通过隧道设计模型录入、坐标里程解算、点云自动过滤、点云降采样与地物分离等,对点云进行特征值提取,得到兼顾规模、精度、效率的点云数据模型;通过点云与设计、点云与点云的对比解算,得到隧道工程质量安全相关成果。该技术方案在某铁路隧道工程中进行实践,可将内外业工作总时间缩短至20 min以内,自动化程度高,成果精度好,具有很好的推广价值。     

Transport of radionuclides by sea-ice and dense-water formed in western Kara Sea flaw leads

A transport assessment of particle-bound and dissolved artificial radionuclides (¹³⁷Cs and ^239,240Pu) by sea-ice and dense-water formed in western Kara Sea flaw leads close to the Novaya Zemlya dumping sites is presented in this study. We both performed a “best estimate” based on available data, and a “maximum assessment” relying on simulated constant releases of 1 TBq ¹³⁷Cs and ^239,240Pu from individual dumping bays. The estimates are based on a combination of (i) the content of particulate matter in sea-ice; (ii) analytical data and numerical simulations of radionuclide concentrations in shelf surface deposits, suspended particulate matter (SPM), and the dissolved phase; and (iii) estimates of lead-ice and dense-water formation rates as well as modeling results of local ice drift pathways. In the “best estimate” case, 2.90 GBq ¹³⁷Cs and 0.51 GBq ^239,240Pu attached to sea-ice sediments can be exported from the lead areas toward the central Arctic basin. The radionuclide burden of the annually formed dense lead water in the “best estimate” amounts to 4.68 TBq ¹³⁷Cs and 0.014 TBq ^239,240Pu. In the “maximum assessment”, potential export-rates of ice-particle bound ¹³⁷Cs and ^239,240Pu toward the central Arctic would amount to 0.64 and 0.16 TBq, respectively. As much as ≈900 TBq ¹³⁷Cs and ≈6.75 TBq ^239,240Pu could be annually taken up by 34.75 dense-water rejected in the lead area. Assuming the (unlikely) instantaneous release of the total ¹³⁷Cs and ^239,240Pu inventories (≈1 PBq and 10 TBq, respectively) from the Novaya Zemlya dumping sites into the dissolved phase, the dense lead water locally formed during one winter season could take up ≈90% of the Cs and ≈68% of the Pu released.