Dynamic simulation of train–truck collision at level crossings

Trains crashing onto heavy road vehicles stuck across rail tracks are more likely occurrences at level crossings due to ongoing increase in the registration of heavy vehicles and these long heavy vehicles getting caught in traffic after partly crossing the boom gate; these incidents lead to significant financial losses and societal costs. This paper presents an investigation of the dynamic responses of trains under frontal collision on road trucks obliquely stuck on rail tracks at level crossings. This study builds a nonlinear three-dimensional multi-body dynamic model of a passenger train colliding with an obliquely stuck road truck on a ballasted track. The model is first benchmarked against several train dynamics packages and its predictions of the dynamic response and derailment potential are shown rational. A geometry-based derailment assessment criterion is applied to evaluate the derailment behaviour of the frontal obliquely impacted trains under different conditions. Sensitivities of several key influencing parameters, such as the train impact speed, the truck mass, the friction at truck tyres, the train–truck impact angle, the contact friction at the collision zone, the wheel/rail friction and the train suspension are reported.     

掺锶磷酸钙骨水泥的体外细胞生物学性能评价及其与掺锶量的相关性

目的 评价"SrHPO4/Ca4(PO4)2O/CaHPO4"系掺锶磷灰石骨水泥的生物相容性及其与掺锶量的关系.方法 通过急性全身毒性、热原性、溶血性、体外细胞毒性以及成骨细胞在材料表面的黏附、增殖与表达等实验,检测材料的性能及生物降解潜能.结果 "SrHPO4/Ca4(PO4)2O/CaHPO4"系掺锶磷灰石骨水泥的急性全身毒性、热原性、溶血性、体外细胞毒性均为合格.Sr-CPC的热原性、溶血性以及碱性磷酸酶值与掺锶量呈非线性关系.结论 含锶磷酸钙骨水泥体外细胞生物相容性良好,是安全的新型骨组织工程支架材料.     

Effect of ABCA1-V771M polymorphism on plasma lipid levels and its relationship with coronary atherosclerotic heart disease

Objective To explore the risk association of ABCA1-V771M polymorphism with coronary heart disease (CHD) in Hart nationality in Northwest of China. Methods With case-control study, ABCA1-V771M polymorphism was detected in 204 unrelated Hart nationality people in Northwest of China, and all the subjects by coronary angiography were grouped into 106 cases and 98 controls. The genotypes and alleles frequency distribution of ABCA1-V771M polymorphisms were analyzed by PCR-RFLP analysis, and the clinical statistics of serum lipids were compared and its effects of ABCA1-V771M polymorphism on the plasma lipid levels and coronary atherosclerotic heart disease were analyzed. Results The genotypic frequencies of ABCA1-V771M polymorphism matched well under Hardy-Weinberg equilibrium (P>0.05), V and M allelic frequencies were 33.3% and 66.7%. In comparison with VV VM genotype carriers, MM genotypes carriers had much lower plasma levels of HDL-C (P<0. 001) and much higher plasma levels of TG (P<0. 05). M allelic frequency in CHD group was significantly higher than V allelic frequency (P<0. 05). M allele was related with more severity of atherosclerosis in the coronary artery than V allele (P<0.05). However, there was no obvious difference in the incidence of AMI among carriers with three genotypes of ABCA1-V771M polymorphism (P>0.05). Conclusion ABCA1-V771M polymorphism was not only associated with the plasma levels of HDL-C and TG, but also related to the susceptibility and severity of coronary atheroselerotic heart disease. Moreover, M771 allele appeared to be atherogenie among Han population in Northwest of China.     

兔眼环孢霉素A缓释微球的眼内释药性研究

目的建立兔眼房水中环孢霉素A缓释微球的高效液相测定方法,考察在不同给药剂量下兔眼房水中的药物代谢特性,为该药预防后发性白内障提供理论依据。方法兔眼行晶体囊外摘除,左眼前房及囊袋内注射环孢素微球,右眼给予空白微球作对照,采用高效液相色谱法监测给药后4周内兔眼房水中环孢霉素A的浓度。色谱柱为反相C18硅胶柱,柱温为60℃,流动相为乙腈-水(67∶33),检测波长210nm。结果兔眼房水中环孢霉素A的浓度在0.13-1.25mg/L范围内呈良好线性关系(r=0.9951),最低检测浓度0.13mg/L,回收率95.91%,日间和日内精密度均小于5.0%。缓释微球的释药速率适中,兔眼前房给药后可在2周内维持较高浓度,高低两种给药剂量下,环孢霉素A的吸收半衰期(t1/2Ka)和血浆清除速率(CL)经检验无统计学差异,药时曲线下面积(AUC)和峰浓度(Cmax)与剂量之间线性相关。结论环孢素A缓释微球在兔眼内有较高的生物利用度,实验期内可达到抑制后发性白内障的有效浓度。     

超大型预制桥墩吊装过程数值计算

以某跨海工程超大型预制桥墩吊装方案为例,基于有限元分析软件ANSYS建立超大型预制桥墩的数值模型,施加重力场模拟吊装过程,得到了吊装过程中桥墩的受力状态,评定了吊装方案的优劣。针对吊装过程中桥墩及吊装件较危险的受力区域进行分析,提出了优化建议。     

动力总成悬置支架多目标拓扑优化和强度分析

基于Optistruct,以支架的最小柔度、最大固有频率作为优化目标函数;以应力、体积作为约束函数,对一发动机后拉杆安装支架进行拓扑优化,优化结果表明:在满足悬置支架强度和模态要求下,质量减少了12%。     

油底壳有限元模态分析及实验验证

以EQ491型发动机油底壳为研究对象,通过有限元法得到了油底壳模型的固有频率和振型,运用模态实验技术,验证了有限元模型的合理性。在原始有限元模型的基础上,对油底壳模型进行约束模态分析,验证了油底壳结构的合理性,即油底壳固有频率远大于发动机机体激振频率。     

基于Moldflow的仪表面罩熔接线验证与结构优化

建立了分析模型,应用Moldflow软件对仪表面罩进行了注塑仿真分析。分析结果表明了熔接线位置,将其与实际零件熔接线缺陷进行了对比验证;同时从仪表面罩结构设计角度提出了可行性解决方案,并总结了在零件结构设计过程中导致熔接线缺陷的关键要素。对比验证结果表明:模流分析能有效指导优化仪表面罩结构,从而减少零件试模次数,提升零件质量,降低制造成本,缩短设计周期。     

第三系富水粉细砂VI级围岩隧道浅埋下穿水库施工技术

兰渝铁路胡麻岭隧道5#斜井正洞段落遇到第三系富水粉细砂地层浅埋下穿水库施工,因而隧道塌方、变形、突水涌泥风险高。施工中采用地表旋喷桩固结隧道洞身围岩,辅以综合降水、双液浆局部加固、CRD交叉中隔壁法开挖等措施,并配以严密的内外监测技术,安全顺利通过此段落。     

《深圳市综合交通体系规划((2013—2030)》编制探索——以更具竞争力、可持续的综合交通体系促进城市转型发展

通过回顾评价深圳市历次综合交通体系规划的得失,分析城市转型对于综合交通体系的挑战以及新形势下综合交通体系规划的定位。以《深圳市综合交通体系规划(2013—2030)》为例,对规划编制的内容和方法开展研究,具体包括:转型导向的交通发展目标与指标体系、一体化的综合交通体系组织、立足区域协作的整体交通战略、与组团结构相匹配的交通分区组织、与城市功能布局的协调互动、注重协同的交通管控政策,以及应对大数据的智能交通策略等。最后介绍规划编制组织特点并提出城市转型期综合交通体系规划的进一步思考。