The influence of suspension components friction on race car vertical dynamics

This work analyses the effect of friction in suspension components on a race car vertical dynamics. It is a matter of fact that race cars aim at maximising their performance, focusing the attention mostly on aerodynamics and suspension tuning: suspension vertical and rolling stiffness and damping are parameters to be taken into account for an optimal setup. Furthermore, friction in suspension components must not be ignored. After a test session carried out with a F4 on a Four Poster rig, friction was detected on the front suspension. The real data gathered allow the validation of an analytical model with friction, confirming that its influence is relevant for low frequency values closed to the car pitch natural frequency. Finally, some setup proposals are presented to describe what should be done on actual race cars in order to correct vehicle behaviour when friction occurs.     

On the influence of tyre and structural properties on the stability of bicycles

In recent years the Whipple Carvallo Bicycle Model has been extended to analyse high speed stability of bicycles. Various researchers have developed models taking into account the effects of front frame compliance and tyre properties, nonetheless, a systematic analysis has not been yet carried out. This paper aims at analysing parametrically the influence of front frame compliance and tyre properties on the open loop stability of bicycles. Some indexes based on the eigenvalues of the dynamic system are defined to evaluate quantitatively bicycle stability. The parametric analysis is carried out with a factorial design approach to determine the most influential parameters. A commuting and a racing bicycle are considered and numerical results show different effects of the various parameters on each bicycle. In the commuting bicycle, the tyre properties have greater influence than front frame compliance, and the weave mode has the main effect on stability. Conversely, in the racing bicycle, the front frame compliance parameters have greater influence than tyre properties, and the wobble mode has the main effect on stability.     

推力和横向压力作用下加筋板破坏分析的理想化结构单元法

理想化结构单元法(ISUM)已经成为评估结构系统中承受载荷能力的一个有效工具.本文给出了最新的ISUM板元公式,并考虑了双轴向推力和横向载荷对板元的加载.为了精确地模拟加筋板的性能,分别用梁-柱元和板元制作了肋材和板材的模型.与有限元分析(FEA)的比较表明该方法对解决加筋板在横向压力和推力载荷下的问题是适用的.对箱形桁材的四点弯曲试验的分析表明与试验数据吻合良好.     

ARTEMIS: French-German project for railway movements command and control

The development of railway transportation, especially through the gradual implementation of high-speed European network, is inciting railway companies to design railway movements command and control systems to enhance technical performance in terms of throughput and control of disturbances while simultaneously minimizing operational costs. The new command-control systems must be modular, adaptable and evolutive structures from both functional and geographical viewpoints if they are to satisfy all operational needs. Concurrent research into performance enhancement and cost reduction prescribes a system in which the majority of the “real time” components are aboards the locomotives. This is particularly true for those components used by the train to indicate its own position on the network as well as those enabling it to converse with operational control centers. The initial task is to design a global architecture of the command-control system that satisfies modularity and availability criteria followed by the development of numerous technical components including radar self-location systems and cellular radio transmission networks. The French (SNCF) and German (DB) national railways have implemented a vast program of co-operation aimed at providing valid, proven answers to these problems so as to allow their trains to travel freely on either network.     

Multi-impact optimization to reduce aviation noise and emissions

This paper describes a multi-indicator assessment and minimization problem focused on aviation “Community” noise. The model explores a combined noise and emission objective for airfreight movements at Luxembourg’s Findel Airport. Community noise is evaluated via four population impact indicators emissions are tabulated from in-flight segments in the proximity of the airport and from the contribution of taxiing. A set of scenarios based on trajectory, aircraft scheduling, fleet composition, operational procedures are implemented in software. An integer programming methodology is used to search for minimal environmental impact. An on/off switch allows for an evaluation of each indicator in the objective. Different impacts on the population are explored in a case study involving the Cargolux Airlines International S.A.     

Use of SeaWiFS data for light availability and parameter estimation of a phytoplankton production model of the Bay of Biscay

Processing SeaWiFS (Sea-viewing Wide Field-of-view Sensor) data provides useful information for the observation and modelling of the phytoplankton production of the Bay of Biscay. Empirical algorithms allow the retrieval of chlorophyll a and non-living Suspended Particulate Matter (SPM) concentrations. These data are used to constrain a coupled 3D physical–biogeochemical model of the Bay of Biscay continental shelf. Two issues are investigated, depending on the variable used, to constrain the winter to spring phytoplankton production for the year 2001. First, SPM data is used as forcing data to correct the corresponding state variable of our model. This allows the realistic simulation of the light limited bloom at the end of February 2001, as observed with SeaWiFS chlorophyll a images and from the NUTRIGAS field cruise. Second, chlorophyll a data is used for parameter estimation of the biogeochemical model. The ability of assimilating these data is tested to improve the simulation of strong blooms observed in late May 2001 in the Loire and Gironde plumes. A global optimization method (Evolutive Strategies) is adapted to the complete 3-D coupled model, in order to find the best set of parameters. The hydrological conditions during the bloom can be validated with data from the PEL01 field cruise. After selection of the most sensitive parameters, the method is tested with twin experiments. Then, the use of real SeaWiFS data reduces the model/data misfit by a factor of two, improving the simulation of bloom intensities and extensions. The sets of parameters retrieved in each plume are discussed.     

An Evaluation of the Accessibility Benefits of Commuter Rail in Eastern Massachusetts using Spatial Hedonic Price Functions

We estimate spatial hedonic price functions to examine local and regional accessibility benefits of commuter rail service in Eastern Massachusetts, while controlling for proximity-related negative externalities and other confounding influences. The data include 1,860 single-family residential properties from four municipalities with commuter rail service, and three municipalities without commuter rail service. We find some evidence of the capitalization of accessibility to commuter rail stations. Two model specifications suggest that properties located in municipalities with commuter rail stations exhibit values that are between 9.6% and 10.1% higher than properties in municipalities without a commuter rail station. With a third model we detect weak evidence of the capitalization of auto access time or walking time to the stations, suggesting that properties located within a one-half mile buffer of a station have values that are 10.1% higher than properties located outside of this buffer area and that an additional minute of drive time from the station is related to a decrease of 1.6% in property values. Our results also indicate that proximity to commuter rail right-of-way has a significant negative effect on property values, which suggests that for every 1,000 ft. in distance from the commuter rail right-of-way, property values are between $732 and $2,897 higher, all else held equal. At the mean sample values, this result translates into an elasticity of between 0.03 and 0.13, depending on the functional form of the hedonic price equation.     

The taxi industry: working conditions and health of drivers,a literature review

The taxi industry plays an important role in urban transportation systems, both in economic and mobility terms. In the case of the former, it provides employment for a large number of people and circulates significant amounts of money. In the case of the latter, it is a flexible means of transportation capable of arriving at any destination. Although the way the taxi industry is organised varies across countries and even within countries, some factors are shared at varying latitudes of the globe. Working conditions, habits, health, and exposure to road crashes have been a subject of interest for researchers from various disciplines, including medicine, psychology, and economics. However, much of this research focuses on a part of the problem and is not mutually referential. A review of the literature may be useful not only to researchers of diverse disciplines but also to industry representatives and those public officials responsible for transportation, road safety and health policy. This article provides a comprehensive review of the working conditions of taxi drivers, their relationship to road risk exposure and their consequences on the health of workers. It also includes information on coping strategies and protective behaviors. The review is based on a Scopus database search. The search covered the period from 1990 to 2015. This initial search was complemented with other database searches, which yielded some additional studies. Our goal was to summarise existing knowledge, identify possible lines of research and suggest some practical recommendations. It would be important (a) to reduce the workload, establish adequate time for breaks, and provide access to healthcare, (b) to implement actions to promote and maintain healthy habits, (c) to diagnose, detect and treat indicators of occupational fatigue and stress, and (d) to develop programs that make it possible to evaluate work concerns and broaden coping strategies to foster positive changes.