Modeling and ratio control of an electromechanical continuously variable transmission

A new type of electromechanical continuously variable transmission (EMCVT) was investigated. The EMCVT uses a direct current (DC) motor to push the driving pulley, which in turn changes the transmission ratio without a hydraulic system. This paper introduces the principle of the EMCVT and establishes a dynamic ratio control model. Ratio control strategies using both position and speed closed-loop control are proposed. Simulation results show that the simulation ratio curves of the EMCVT follow pre-designed ratios well for ramp and sine curves. Control software is based on MATLAB/Simulink/Stateflow and MotoHawk platforms. A prototype vehicle equipped with an EMCVT has been developed. Vehicle test results show that the control performance of the EMCVT satisfies the requirements of vehicle operation. The effectiveness of the EMCVT ratio control strategy proposed in this paper is validated with test data for the prototype vehicle.     

Underwater acoustic imaging: image due to a specular reflector in the geometrical-acoustics limit

In underwater acoustic imaging, which is used to produce high-quality images in turbid waters, a specular reflector can produce a “pseudoimage” of the receiving array at the reflecting surface. Based on the “geometrical approximation” (which is similar to geometrical acoustics), formulae are derived for the size and shape of the pseudoimage for both flat and curved reflectors. For curved reflectors, described by two principal radii of curvature, the formulae also assume the “large-range approximation.” The formulae allow radii of curvature to be determined from an image. Also discussed briefly are some possible extensions and the role of nongeometrical effects.     

The optimal dispatching of taxis under congestion: A rolling horizon approach

Taxis make an important contribution to transport in many parts of the world, offering demand‐responsive, door‐to‐door transport. In larger cities, taxis may be hailed on‐street or taken from taxi ranks. Elsewhere, taxis are usually ordered by phone. The objective of a taxi dispatcher is to maximize the efficiency of fleet utilization. While the spatial and temporal distribution of taxi requests has in general a high degree of predictability, real time traffic congestion information can be collected and disseminated to taxis by communication technologies. The efficiency of taxi dispatching may be significantly improved through the anticipation of future requests and traffic conditions. A rolling horizon approach to the optimisation of taxi dispatching is formulated, which takes the stochastic and dynamic nature of the problem into account. Numerical experiments are presented to illustrate the performances of the heuristics, taking the time dependency of travel times and passenger arrivals into account.     

Attribute‐based perceptual mapping using discriminant analysis in a public sector passenger bus transport company: A case study

This study aims at evaluating the customer expectations in a public sector passenger transport company, a crucial sector in developing countries like India. A questionnaire containing 18 quality characteristics was administered to various customers of three bus depots of one division of a state road transport undertaking in South India. Attribute‐based perceptual mapping using discriminant analysis was done to position the three depots and to identify their strengths and weaknesses. The findings would help prioritize different parameters and also provide guidelines for managers to focus on and to improve. Copyright © 2012 John Wiley & Sons, Ltd.     

Probabilistic modelling of the ultimate strength of ship plates with non-uniform corrosion

This paper presents the results of a parametric study of probabilistic modelling of the ultimate strength of ship plates with non-uniform corrosion represented by random fields. The load-shortening behaviour of the plates with non-uniform reduction of thickness due to corrosion under longitudinal compression is obtained using a general-purpose nonlinear finite element analysis program. A nonlinear time-dependent corrosion model is used to define the probabilistic characteristics of the random fields based on corrosion data measured in plate elements at different locations of bulk carriers. Based on the probabilistic models derived by Monte Carlo simulation, equations to predict the mean and the 5 % characteristic value of the ultimate strength of plates with non-uniform corrosion are developed. Finally a regression equation is proposed to take into account the effect of non-uniform corrosion patterns in the predictions of the ultimate strength of plates with uniform corrosion.     

How Are Our MPAs Doing? Challenges in Assessing Global Patterns in Marine Protected Area Performance

Without effective management, protected areas are unlikely to achieve the high expectations the conservation and development sectors have for them: conserving biodiversity and alleviating poverty. Numerous marine protected area (MPA) assessment initiatives have been developed at various spatial and temporal scales, including the guidebook How is your MPA doing? These management assessments have been useful to sites to clarify and evaluate their objectives, yet efforts to examine broader regional or global patterns in MPA performance are only beginning. The authors conducted exploratory trend analyses on How is your MPA doing? indicator data collected by 24 MPAs worldwide to identify challenges and areas for future work. Wide variability across sites with regard to the indicators examined and the constructs used to measure them prevented a true meta-analysis. Managers assessed biophysical indicators more often than socioeconomic and governance constructs. Investment by the conservation community to support collecting and reporting high-quality data at the site level would enable a better understanding of the variation in MPA performance, clarify the contribution of MPAs to both biodiversity conservation and poverty alleviation, and help drive better MPA performance. The absence of rigorous and consistent monitoring protocols and instruments and a platform to turn raw MPA monitoring data into actionable information is a critical but under-recognized obstacle to cross-project learning, comparative analyses, and adaptive resource management.     

Modelling and forecasting the demolition market in shipping

ABSTRACT

We model the demolition market, an integral part of the international shipping industry. It is shown through the implementation of a Vector Autoregressive (VAR) model that international steel-scrap prices contribute decisively towards price discovery in the ship-demolition industry. Our finding is explained and attributed to the fact that the growth models of Southeast Asian countries, where the ship-demolition market is primarily located, rely on scrap metal imports. These are mainly obtained from the developed economies rather than the recycling of vessels. We then proceed to test the forecasting ability of our model and use it for price prediction in the ship-demolition market. We establish that it provides the decision-makers with a useful prediction tool which enables all stakeholders involved, the ship owner, the recycler and the cash buyer alike, to gain valuable insights of the underlying trend in the sector.     

Do Public Transport Improvements Increase Agglomeration Economies? A Review of Literature and an Agenda for Research

Public transport improvements may increase economic productivity if they enable the growth and densification of cities, downtowns, or industrial clusters and thereby increase external agglomeration economies. It has been argued that the potential agglomeration benefits are large; if so, understanding them better would be useful in making funding decisions about public transport improvements. We reviewed theoretical and empirical literature on agglomeration as well as a small number of articles on transportation's role in agglomeration. The theoretical literature is useful in understanding possible avenues by which transportation improvements might affect agglomeration, although there is little discussion of public transport specifically. Relevant empirical studies tend to focus on metropolitan regions and use a generalized measure of transportation cost. But public transport impacts on agglomeration are likely to be different from road investment impacts. We identified several ways of conducting research building on this literature that would help evaluate the agglomeration impacts of public transport proposals: tracing the links between transport, agglomeration, and productivity; better motivating research using theories of agglomeration mechanisms; taking scale and redistribution into account; exploring the functional form of agglomeration economies; accounting for endogeneity in model structure; and considering development context.     

Risk aversion,regret aversion and travel choice inertia: an experimental study

This paper presents the results of an experimental study into the role of risk aversion and regret aversion as codeterminants of travel choice inertia. Theoretical results published by Chorus and Dellaert are tested empirically. More specifically, the expectation is tested that when (1) travelers are risk averse, (2) the quality of travel choices is uncertain, and (3) the quality is partially revealed upon usage, travel choice inertia emerges as a learning-based lock-in effect. In addition, this paper studies the role of regret aversion as a possible trigger of travel choice inertia. Analyses are based on data collected in an experiment, where the reward that participants obtain is a function of the outcome of choices they make. Empirical results suggest that the learning-based lock-in effect indeed plays a role in the context of our data. The evidence for the hypothesis that regret aversion triggers inertia is mixed at best.     

Updating predictive accident models of modern rural single carriageway A-roads

Abstract

Reliable predictive accident models (PAMs) are essential to design and maintain safe road networks, and yet the models most commonly used in the UK were derived using data collected 20 to 30 years ago. Given that the national personal injury accident total fell by some 30% in the last 25 years, while road traffic increased by over 60%, significant errors in scheme appraisal and evaluation based on the models currently in use seem inevitable. In this paper, the temporal transferability of PAMs for modern rural single carriageway A-roads is investigated, and their predictive performance is evaluated against a recent data set. Despite the age of these models, the PAMs for predicting the total accidents provide a remarkably good fit to recent data and these are more accurate than models where accidents are disaggregated by type. The performance of the models can be improved by calibrating them against recent data.