Minimum Efficient Scale (MES) and preferred scale of container terminals

The decision on the scale of a port terminal affects the terminal’s managerial, operational and competitive position in all the phases of its life. It also affects competition structures in the port in which the terminal is operating, and has a potential impact on other terminals. Port authorities and terminal operators need to know the scale of the terminal when engaging in concession agreements. In economic theory the scale of a plant/firm is typically defined in relation to the Minimum Efficient Scale (MES), the long-run output where the internal economies of scale are fully exploited. However, there are a number of theoretical and empirical indications that in ports the scale of a terminal is commonly guided by a combination of the MES and other determining factors. The “preferred” scale is the result of a complex interaction between the MES, the port governance framework and objectives, the market size and structure, technological change and operational considerations, physical and geographical limitations, and the business patterns of shipping lines. This study analyses the factors resulting in a preferred container terminal scale that in most of the times is different from the MES. The analysis of the technical, market-related and governance-related factors is supported by theoretical and empirical insights that illustrate the presence of a range of actual ”preferred” scales of terminal concessions that usually are different, below or above, MES.     

Mesoscale subduction at the Almeria–Oran front: Part 1: Ageostrophic flow

This paper presents a detailed diagnostic analysis of hydrographic and current meter data from three, rapidly repeated, fine-scale surveys of the Almeria–Oran front. Instability of the frontal boundary, between surface waters of Atlantic and Mediterranean origin, is shown to provide a mechanism for significant heat transfer from the surface layers to the deep ocean in winter. The data were collected during the second observational phase of the EU funded OMEGA project on RRS Discovery cruise 224 during December 1996. High resolution hydrographic measurements using the towed undulating CTD vehicle, SeaSoar, traced the subduction of Mediterranean Surface Water across the Almeria–Oran front. This subduction is shown to result from a significant baroclinic component to the instability of the frontal jet. The Q-vector formulation of the omega equation is combined with a scale analysis to quantitatively diagnose vertical transport resulting from mesoscale ageostrophic circulation. The analyses are presented and discussed in the presence of satellite and airborne remotely sensed data; which provide the basis for a thorough and novel approach to the determination of observational error.     

Energy facility siting in the urban coastal zone: Compatible or not?

Abstract

Most federal and state coastal laws were framed with a distinct emphasis on preservation of rural/recreational areas. Yet in recent years a rural/urban coastal dichotomy has emerged. This has been especially prominent in the siting of energy facilities since these operations are often water dependent; power plants, for example, need huge amounts of cooling water, and offshore oil and gas extraction requires onshore support facilities. Recently, this issue has gained special prominence on the East Coast with the commencement of offshore oil and gas exploration. A case study was conducted in Hudson County, New Jersey, in New York harbor. In this area five oil‐related facility proposals were rejected from 1972 to 1976, primarily due to citizen opposition. Citizen activists now see the urban waterfront as a special place to which they want access and amenity uses rather than a continuation of past, almost exclusive industrial development. Hudson County citizens share the aspirations of those in several urban coastal areas which have experienced waterfront revitalization, including Baltimore, Boston, Chicago, Detroit, New Haven, Philadelphia, San Francisco, Seattle, and Toronto. Innovative siting which utilizes inland, rather than coastal, locations is suggested as one way to lessen urban/rural siting tensions.     

Transport and nation‐state governments worldwide: a further review

The review undertaken in this Paper shows how, in 1984, governments of nation‐states of the world deal with the important function of Transport. In all 115 countries are included and, with the information now given, it is possible to compare the situation with 1981–82, and also have a current global view of affairs affecting Transport as managed by governments. Such a review is part of the service which Transport Reviews provides for its readers. It is hoped to conduct a further review in 1988.     

Estimating traffic demand risk – A multiscale analysis

This paper proposes a novel method for estimating the traffic demand risk associated with transportation. Using mathematical properties of wavelets, we develop a statistical measure of traffic demand sensitivity with respect to GDP. This measure can be adapted in a flexible way to capture risk levels relevant for different investment horizons. We demonstrate the timescale decomposition of risk with Swedish traffic demand data for 1950–2005. In general, rail transport shows a stronger co-movement with GDP than road transport. Moreover, we examine the volatility exhibited by traffic demand. Our findings suggest that rail investments are more risky than road investments. Since the findings can be used for optimal investment timing and for choice between public investment alternatives, they are deemed important for public policy in general.     

Estimation of road profile variability from measured vehicle responses

When assessing the statistical variability of fatigue loads acting throughout the life of a vehicle, the question of the variability of road roughness naturally arises, as both quantities are strongly related. For car manufacturers, gathering information on the environment in which vehicles evolve is a long and costly but necessary process to adapt their products to durability requirements. In the present paper, a data processing algorithm is proposed in order to estimate the road profiles covered by a given vehicle, from the dynamic responses measured on this vehicle. The algorithm based on Kalman filtering theory aims at solving a so-called inverse problem, in a stochastic framework. It is validated using experimental data obtained from simulations and real measurements. The proposed method is subsequently applied to extract valuable statistical information on road roughness from an existing load characterisation campaign carried out by Renault within one of its markets.     

Vehicle sensor data-based analysis on the driving style differences between operating indoor simulator and on-road instrumented vehicle

Abstract

Indoor simulator and on-road instrumented vehicle are the most popular ways to analyze driving behaviors by using collected Vehicle Sensor Data (VSD). However, for a same driver, the driving performance could be different in the real world and in the simulated world. Even though many studies have been conducted to discover the differences of driving behaviors in these two circumstances, little research has focused on analyzing the differences in driving style, which can provide more integrated knowledge of a driver from the natural structure, stimulus–response mechanism, of driving behaviors. Therefore, in this paper, the driving styles in both the real world and the simulated world are extracted by implementing the nonnegative matrix factorization method on the collected VSD data. Through this analysis, the driving style differences can be quantitatively described and discussed in detail. It is found that the drivers tend to be more unstable and sometimes aggressive when driving the simulator and the deviation in the perception of temporal gap in two circumstances is also discovered. The research findings are particularly valuable to calibrate the driving simulator and construct more reliable driving behavior models.     

Policy considerations for wetland wastewater treatment in the coastal zone: A case study for Louisiana

Two major environmental problems currently affecting the Louisiana coastal zone are a high rate of wetland loss and high levels of surface water pollution. The application of secondarily treated wastewater to wetlands can be a means of dealing with both of these problems. The benefits of wetland wastewater treatment include improved surface water quality, increased accretion rates to balance a high relative water level rise due mainly to subsidence, improved plant productivity and habitat quality, and decreased capital outlays for conventional engineering treatment systems. Wetland treatment systems can, therefore, be designed and operated to restore deteriorating wetlands. Hydrologically altered wetlands, which are common in the Louisiana coastal zone, are appropriate for receiving municipal and some types of industrial effluent. While the U.S. Environmental Protection Agency has determined wetland wastewater treatment is effective in treating municipal effluent, it has discouraged the use of natural wetlands for this purpose. At the same time, funds are being used for the construction of artificial wetlands to treat municipal effluent. In the Louisiana coastal zone, however, wetlands are deteriorating and disappearing due to hydrological alteration and a high rate of relative sea level rise. If no action is taken, these trends will continue. Effluent discharge to existing wetlands should be incorporated into a comprehensive management plan designed to increase sediment and nutrient input into subsiding wetlands in the Louisiana coastal zone, improve water quality, and result in more economical waste‐water treatment. The authors believe that the Louisiana example serves as a model for other coastal areas especially in light of projections of accelerated sea level rise.     

Competition and ownership in land passenger transport: the fourth international conference — Part 2

In the rail industry worldwide, there has been a search for new solutions, including restructuring, corporatization, and outright privatization, but the complexity of the rail industry offers special problems. In the Workshop we looked in detail at the British, Swedish, German, Australian (New South Wales) and New Zealand experiences, as well as considering more general issues such as cost structures, vertical separation and competitive tendering. Whilst it was agreed that some developments, such as greater contracting out, were clearly beneficial, other developments such as the separation of infrastructure from operations remained of uncertain value until the issues of efficient pricing and slot allocation were resolved.     

Remoteness and accessibility in the vulnerability analysis of regional road networks

This paper considers the development of a method for network vulnerability analysis which considers the socio-economic impacts of network degradation and seeks to determine the most critical locations in the network. The method compares the levels of remoteness (or its inverse, accessibility) of localities within the study region, on the basis of the impacts of degradation of the road network on a recognised accessibility/remoteness index that can be applied to each and every location within the region. It thus extends the earlier work on accessibility-based vulnerability analysis which was limited to assessment of impacts on selected nodes in a network. The new method allows study of impacts on both specified locations (which do not have to be represented as network nodes) and the region as a whole. The accessibility/remoteness index is defined so that an accessibility surface can be calculated for the region, and the volume under this surface provides an overall measure of accessibility. Changes in the volume under different network states thus reflect the overall impacts. The method is applied to a rural region in south east Australia.