Application of a 3-D variational inverse model to the analysis of ecohydrodynamic data in the Northern Bering and Southern Chukchi Seas

In the scope of the Inner SHelf Transfer And Recycling Program, extensive oceanographic surveys were conducted in the Northern Bering and Southern Chukchi Seas. A vast amount of hydrographic, chemical and biological data were collected in order to increase the information available on the system and to test if biological observations are indeed compatible with the dominant hydrographic regimes. An original model, based on the variational inverse method, was developed with the aim of reconstructing realistic three-dimensional fields of the variables of interest and giving an interpretation of the observations consistent with the physics of the general circulation. The basic formulation of the model is quite general and provides a very helpful tool in the context of interdisciplinary studies. In a first stage, the vertical and horizontal structures of physical variables are reproduced and discussed. Secondly, a sketch is proposed to explain the driving mechanisms of the primary productivity in the Northern Bering Sea. In particular, one shows that the hydrodynamic regimes strongly condition the behaviour of the ecosystem and are mainly responsible for the very fertile environment that characterizes the Southern Chukchi Sea.     

Some evidence of transit demand elasticities

This paper draws together empirical evidence from a variety of sources about the magnitudes of transit price elasticities and cross-elasticities. A number of different practical measures of demand elasticity are first defined and some expectations about magnitude are discussed. Evidence is then collated from the analysis of transit operating statistics, from experience in demonstration projects and from attempts to develop cross-sectional models of demand and modal choice.In general, all of the limited evidence available suggests that transit demand is inelastic with respect to money price. Typically, ridership is significantly more sensitive to changes in the level of service (particularly door-to-door journey time) than to changes in fare, although service elasticities also are usually numerically less than unity.In broad terms, short-run direct fare elasticities are characteristically observed to lie within the range of -0.1 to –0.7. A more precise value in a particular instance will depend on a variety of factors in ways which largely support a priori notions. Thus in very large cities, central city areas, at peak hours, and in other circumstances where the prices of alternative modes are high, transit fare elasticities are usually numerically at the lower end of the range.Estimates of cross-elasticities (representing the volumes of transit traffic diverted to other modes by transit price increases) are much harder to come by, and in fact only a few very uncertain estimates are presented here.This paper is a condensation of an Urban Institute Working Paper of the same title (WP 708-52, November 1971). Opinions expressed are those of the author and do not necessarily represent the views of The Urban Institute or its sponsors.     

Role of the Railways in the Future of Air Transport

Abstract

The role of the railways in the air transport industry is usually limited to provision of access to airports. However, the development of high-speed rail networks and the congestion and environmental problems faced by the air transport industry suggest the railways could have a greater role in working with the airlines to provide an integrated transport service for medium-distance journeys (up to 800 km). Many air journeys involve two flights and a transfer at a hub airport. The alternative being investigated here would replace air journeys by a rail journey and a flight, and a transfer between them at the hub airport. Such integration could offer a positive alternative to aircraft on some routes and lead to railway journeys to airports becoming part of air transport services, and not only to provide access to them. Integration could therefore provide a better use of available air capacity rather than duplicating some high-speed rail routes and services.     

A note on using Davidson's function in equilibrium assignment

This paper describes the use of the Davidson congestion function in modelling network flows using equilibrium assignment. A modification to the function is given, which defines the function over all flows values, and consequently removes computational difficulties noted in earlier studies. The modification requires the inclusion of an additional model parameter, and the selection of a suitable value for this parameter is studied for two sets of data. The modified Davidson function is also compared to two alternative functions; a step-wise linear function and a quartic polynomial function, which have both been proposed as congestion functions. Comparisons are made between observed link volumes and the assigned volumes from these models. It is concluded that the modified Davidson function is useful for inclusion in an equilibrium assignment model, given its ability to reflect differences in network link type (e.g. capacity and speed) and environment through its parameters, the conceptual advantage of the function through its derivation from queueing theory, and the previous discovery of reliable methods for estimating its parameters. A value of about 0.8–0.9 is suggested for the parameter (μ, 0 < μ < 1) introduced in the modification.     

Active Roll Control for Passenger Cars

The development of a mathematical model of a limited bandwidth hydro-pneumatic suspension that is incorporated into a vehicle handling model is described. The combined model is used to evaluate a suitable control strategy for eliminating body roll during a cornering manoeuvre. The philosophy behind the roll control strategy has been to use feedback measurements of the body motions which do not compromise the ride control. A study of the influence of the position of the body motion feedback transducer on the effectiveness of the system to reduce the body roll is presented. Non-linear modelling of the suspension components for a 0.8g cornering manoeuvre has revealed performance limitations. Conclusions are drawn as to the effectiveness of the control scheme.     

Trip distribution for limited destinations: a case study for grocery shopping trips in the Netherlands

In this paper, we introduce a new trip distribution model for destinations that are not homogeneously distributed. The model is a gravity model in which the spatial configuration of destinations is incorporated in the modeling process. The performance was tested on a survey with reported grocery shopping trips in the Dutch city of Almelo. The results show that the new model outperforms the traditional gravity model. It is also superior to the intervening opportunities model, because the distribution can be described as a function of travel costs, without increasing the computational time. In this study, the distribution was described by a simple function of Euclidean distance, which provides a good fit to the survey data. The slope of the distribution is quite steep. This shows that most trips are made to nearby supermarkets. However, a significant fraction of trips, mainly made by car, still goes to supermarkets further away. We argue that modeling of these trips by the new method will improve traffic flow predictions.     

Parameter transfer of common-metric attributes in choice analysis: implications for willingness to pay

There is a growing literature that promotes the presence of a mix of compensatory and semi-compensatory processing strategies in the way that individuals evaluate packages of attributes in real or hypothetical markets, and make choices. This paper proposes a specification for the utility form in a choice model to test if, given a pair of attributes with a common-metric (e.g., components of travel time or cost), the attribute with the dominating level defines the marginal (dis)utility that is assigned to both attributes. We refer to this processing strategy as a parameter transfer rule. We use a stated choice data set, in the context of car driving individuals choosing between tolled and non-tolled routes, to estimate a mixed logit model which incorporates the presence of the parameter transfer rule and the conventional fully compensatory rule, both existing up to a probability. We find that if this parameter transfer heuristic is part of the mix, the WTP is more than 30% higher, on average, than when only a fully compensatory rule is imposed. We also contrast the parameter transfer rule with other semi-compensatory heuristics which have been investigated in other papers, and show that the finding adds further support to the accumulating evidence that a semi-compensatory attribute processing rules tend to result in higher mean WTP estimates compared to the fully compensatory attribute processing rule.     

Improving the efficiency of demand-responsive paratransit services

State agencies responsible for ADA-eligible paratransit services are increasingly under pressure to contain costs and maximize service quality. Many do not operate vehicles themselves; instead, they contract out the provision of services. Contractors are paid for each hour of service. They are responsible for hiring crew, forming routes, dispatching, and operating and maintaining agency-owned vehicles. In the Twin Cities of Minneapolis and Saint Paul, Metro Mobility, the agency responsible for providing paratransit services, requires contractors to use agency-approved software for booking trips dynamically and sets parameters that guide contractors’ practices. Customer trips booked in this fashion may not utilize capacity in the most efficient manner. Therefore, beginning with the daily trip schedules generated by the software, this paper proposes two approaches for improving the efficiency of paratransit operations and estimates the benefit of using these approaches via experiments that utilize Metro Mobility data. The first approach re-optimizes routes developed at the end of each day. The second approach evaluates the benefit to state agencies of selectively using non-dedicated service providers such as taxis. Both approaches are tested on actual data obtained from Metro Mobility. The study shows that a conservative estimate of savings from re-optimization would be approximately 5% of Metro Mobility’s operating costs. Savings from the use of taxis are smaller and in the range of hundreds of dollars per day.     

The traffic and behavioral effects of the I-35W Mississippi River bridge collapse

On August 1, 2007, the collapse of the I-35W bridge over the Mississippi River in Minneapolis abruptly interrupted the usual route of about 140,000 daily vehicle trips, which substantially disturbed regular traffic flow patterns on the network. It took several weeks for the network to re-equilibrate, during which period travelers continued to learn and adjust their travel decisions. A good understanding of this process is crucial for traffic management and the design of mitigation schemes. Data from loop-detectors, bus ridership statistics, and a survey are analyzed and compared, revealing the evolving traffic reactions to the bridge collapse and how individual choices could help to explain such dynamics. Findings on short-term traffic dynamics and behavioral reactions to this major network disruption have important implications for traffic management in response to future scenarios.     

An Optimal Self-Tuning Controller for an Active Suspension

An optimal self-tuning control algorithm is presented for vehicle suspension design. The controller, incorporating a weighting controller, state observer and parameter estimator, is designed according to linear optimal control (LQG) theory. Based on the updated estimates of vehicle parameters and states, and the adapted weighting parameters, the LQG controller provides the optimal set of gains over different operating conditions. The feasibility and effectiveness of the proposed self-tuning system was investigated and proved by simulation studies.