Pb and Pu in the Northeast Water Polynya, Greenland: particle dynamics and sediment mixing rates

Distributions of the radionuclides ²¹⁰Pb and ^239,240Pu in sediment cores from the Northeast Water Polynya, Greenland, showed that these nuclides reached depths of 5–15 cm by particle mixing and sediment accumulation. End-member average values of the particle mixing coefficient and sediment accumulation rate were 0.13 cm² y⁻¹ and 0.06 cm y⁻¹, obtained from the ²¹⁰Pb profiles by assuming that each process is dominant relative to the other. Both ²¹⁰Pb and ^239,240Pu were measured on four cores; using the Pu data to constrain mixing rates produced corrected sediment accumulation rates that were 20–80% of the values calculated by neglecting mixing. Organic carbon burial in the polynya sediments was ≤0.4 mmol m⁻² d⁻¹, based on measured POC values at depth in the sediments and sediment accumulation rates corrected for mixing. This value is about 1% of the independently measured POC flux leaving the euphotic zone and compares with benthic carbon remineralization rates of 7% calculated by others from O₂ uptake in the sediments.The inventories of excess ²¹⁰Pb in the sediments ranged from 6 to 28 dpm cm⁻². Relative to the atmospheric input of ²¹⁰Pb and in situ production from decay of ²²⁶Ra, approximately 5 dpm cm⁻² of ²¹⁰Pb was being removed from the water column. The difference between the removal from the water column and sediment inventories suggests a net import of ²¹⁰Pb to the polynya. This may occur by input of dissolved ²¹⁰Pb from offshore waters or by input of ²¹⁰Pb carried by sea ice. Particulate matter in land-derived fast ice adjacent to the polynya contained 330 ± 14 dpm of excess ²¹⁰Pb g⁻¹. If particles transported in sea ice are comparable to those extracted from fast ice, then sea ice transport into the polynya followed by melting may be an important source of excess ²¹⁰Pb to the area. Fast ice also may contribute ²¹⁰Pb if portions break off and melt within the polynya, as occurred in 1993.     

The coastal edge of the Northeast Water polynya in spring 1993

Multidisciplinary, marine ecological observations were conducted at the shallow water edge of the Northeast Water in June, 1993. Although variable in size and shape, a small polynya was constantly present at Eskimonaes, at the fast-ice edge of Ingolfsfjord. A shallow stratified layer developed at the water sufface at negative water and air temperatures—an effect of sea ice melting in cold water early in the season. Nutrients were recorded in considerable quantities, although by mid July NO₃ had become depleted. The chlorophyll and phytoplankton maxima at 8–12 m depth had peak values of 2 mg chl a m⁻³, typical for Arctic algal blooms. The phytoplankton included over 90 species and was dominated by the Fragillariopsis group. Zooplankton was poor in biomass and density, but over 23 taxa were found, with the copepods Oithona similis and Pseudocalanus acuspes being numerically dominant. Sedimentation was approximately 0.2 g dry weight m⁻² d⁻¹ and suspended matter concentrations ranged from 4 to 19 mg l⁻¹. The benthos was represented by hard bottom forms only, with a surprisingly dense cover of macrophytes. Juvenile sea urchins (Strongylocentrotus droebachiensis), brittle stars (Ophiocten sericeum) and amphipods were dominant. Higher trophic levels were represented by benthic feeders, such as eiders and walruses. The area observed was more similar to high Arctic fjord ecosystems than to the offshore central Northeast Water polynya.     

Benthic community patterns reflect water column processes in the Northeast Water polynya (Greenland)

Benthic community patterns were investigated in the Northeast Water polynya (Greenland) during the summers of 1992 and 1993 to elucidate to what extent the bottom fauna is influenced by the dynamics of the overlying water. Five different fractions of the benthos (foraminiferans, nematodes, polychaetes, peracarid crustaceans, and epibenthic megafauna), ranging in average adult body size over 6 orders of magnitude (from about 100 μm to about 10 cm), were sampled quantitatively at 69 stations in water depths from 40 to 515 m. Total abundances of nematodes, polychaetes and peracarid crustaceans were found to be primarily correlated with parameters characterizing the potential benthic food supply (water column pigment and nitrate concentrations, sediment bound pigments and sediment biological activity), whereas abundances of foraminiferans and megabenthos were largely associated with seabed properties. Four benthic zones were distinguished by separately analyzing the faunistic composition and distribution of the five community fractions for Ob Bank, Western Westwind Trough, Eastern Westwind Trough, and Belgica Trough. This pattern was shown principally to reflect pelagic regimes differing in surface water hydrography, ice cover and euphotic productivity. This is the first time that a synoptic study of several benthic community portions spanning such a range in sizes and life styles has been performed in a polar shelf ecosystem. Our results indicate that abundances as well as composition of Arctic benthos are largely influenced by mesoscale pelagic processes, and thus provide further evidence for the importance of the benthic-pelagic coupling in high latitude seas.     

The association of the population recruitment of gulf menhaden, Brevoortia patronus, with Mississippi River discharge

Gulf menhaden, Brevoortia patronus, which constitutes a major industrial reduction fishery in the USA, spawn across the northern Gulf of Mexico with a focus of spawning about the Mississippi Delta. This species is estuarine dependent; adults spawn over the continental shelf and their larvae are transported, by mechanisms that are presently not well understood, to estuarine nursery areas. Larval gulf menhaden, along with some other surface oriented larval fishes, appear to aggregate along the Mississippi River plume front, while evidence of the ecological consequences of this aggregation in terms of the feeding, growth, and survival of larvae is ambiguous. On an annual scale, Mississippi River discharge is negatively associated with numbers of half year old recruits. Discharge of the Mississippi River and the population recruitment of gulf menhaden may be plausibly linked through the action of the river's plume and its front on the shoreward transport of larvae. Greater river discharge results in an expansive plume that might project larvae farther offshore and prolong the shoreward transport of larvae. An indirect, decadal scale, positive response of recruitment and river discharge is possible, but not certain. Recruitment became elevated after 1975 when river discharge increased and became highly variable. This response might owe to enhanced primary and secondary production driven by nutrient influx from the Mississippi River.     

平地机安装自动找平系统的使用与校对

平地机被广泛应用于各种路面工程的平整及其它工程的改良施工中,介绍了平地机自动找平系统的组成、作用、控制,着重对系统的三大作用、校对时间作了说明.     

Deep foundation pit excavation procedure optimization considering creep deformation on nearby metro tunnelEI北大核心

Research purposes: The existing researches about excavating procedures of deep foundation pit on nearby metro tunnel in soft formation are lack of systematicness, and creep characteristics of soft clay are not usually taken into consideration. This paper takes Qianhaiwan station of Metro Line 11 in Shengzhen as engineering background and considers creep characteristics in sludge formation. The influence of step excavation in the transversal, longitudinal and vertical directions on the deformation of foundation pit and nearby subway tunnel are simulated, which may be expected to provide theoretical basis for choosing foundation pit excavation procedure of Qianhaiwan station. Research conclusions: (1) The segment far away from tunnel should be excavated firstly when only transversal step excavation was undertaken along the horizontal direction of foundation pit. (2) The maximum horizontal displacement of the piles show exponential relations with the number of segments when step excavation of foundation pit was undertaken in vertical and transversal or longitudinal. If thickness of every step excavation was limited in 1.5~2 m, the horizontal displacement of the pile near tunnel can be reduced about 9 percent when there is no horizontal step excavation. (3) Transversal step excavation with segments far from tunnel excavated firstly was found to be the best step excavation method under the same condition of step number and support, and longitudinal and transversal step excavation followed while longitudinal step excavation was the last. (4) The research results have guiding significance for foundation pit of Qianhaiwan station and similar projects.     

Assessing a maritime service website prototype in a ship bridge simulator: navigators’ experiences and perceptions of novel e-Navigation solutions

The aim of this study was to assess proof of concept and usability of a maritime service website prototype in a full-mission ship bridge simulator through Swedish mariners’ experiences and perceptions. This test was part of the European Commission’s EfficienSea2 project for e-navigation. The prototype was intended as an aid to existing standard systems and methodologies for planning, executing and monitoring voyages. The study began with 5 days of simulator trials focused on today’s standard practices. This served as a baseline to compare to subsequent 4 days of simulator trials testing the prototype. For data collection, observations, video footage, interviews, and eye tracking were used. Data analysis included breaking apart the qualitative data to capture the perceptions of the participants, and a preliminary analysis of eye-tracking data as a complement. The results suggested that the prototype could be more suitable for a route planning stage, that the participants were familiar with similar existing solutions from other manufacturers, and that the contents of the tool would be most beneficial if integrated within the Electronic Chart Display and Information Systems (ECDIS). There is a pressing need for the novel solutions to be user needs-driven, integrated with the existing technologies, and standardized across the domain, and these processes must go hand-in-hand with accounting for all involved stakeholders, procedures, regulations, and training, as this will alter the course of shipping.     

Comparing operator and users costs of light rail, heavy rail and bus rapid transit over a radial public transport network

A model to compare three alternative forms of public transport - light rail, heavy rail and bus rapid transit - is developed for an urban network with radial lines emanating from the borders to the city centre. The theoretical framework assumes an operation aimed at minimising the total cost associated with public transport service provision, which encompasses both operator and users costs. The decision variables are the number of lines (network density) and the frequency per period for each mode. This approach has no prejudices a priori in respect of whether a specified delivery scenario is aligned with existing modal reputation. Rather, we establish the conditions under which a specific transit mode should be preferred to another in terms of the operator (supply) and user (demand) side offerings. The model is applied using data from Australian cities, suggesting that in most of the scenarios analysed a high standard bus service is the most cost-effective mode, because it provides lower operator costs (infrastructure, rolling stock and operating cost), access time costs (due to a larger number of lines) and waiting time cost (due to larger frequencies of operation). A rail mode, such as light rail or heavy rail, may have a lower total cost only if it is able to run faster than bus rapid transit, and the difference in speed is enough to outweigh the bus advantage on operator cost and access and waiting times.     

Scantling multi-objective optimisation of a LNG carrier

Numerous real-world problems related to ship design can be solved by various alternatives. However, the scantling design has conflicting objectives such as minimum production cost, minimum weight and maximum moment of inertia (stiffness). Therefore a multi-purpose solution had to be settled in order to meet all these requirements at once. Ship design is a complex endeavour requiring successful coordination of many different disciplines, both technical and non-technical. Basic design is the least defined stage of the ship design process and seeks to define the optimal amidships section structure. For that purpose, recent improvements have been made to a numerical tool in order to optimise the scantling of ship sections by considering production cost, weight and moment of inertia in the optimisation objective function. A multi-criteria optimisation of a LNG carrier is conducted in this paper to illustrate the analysis process. Pareto frontiers are obtained and results have been validated by the Bureau Veritas rules. The methodology presented in this paper has demonstrated its effectiveness in optimising scantling of ships at a very early design stage thanks to a management of critical problems usually studied at a later stage of the design.