使用燃料电池的铁道车辆转向架驱动试验

在全球环保的号召下,世界各地对节约能源和降低环境负担的要求与日俱增.因此,使用以氢作为洁净、高效能源的燃料电池来驱动车辆正引起人们的关注.日本铁道技术综研所(RTRI)根据过去的研究成果,于2001年开始开发使用燃料电池的铁道车辆,并报道了用铁道车辆转向架进行驱动试验的结果.     

Material transport from the nearshore to the basinal environment in the southern Baltic Sea: I. Processes and mass estimates

Processes involved in erosion, transport and deposition of cohesive materials are studied in a transect from shallow (16 m) to deep (47 m) water of the SW Baltic Sea. The wave- and current-induced energy input to the seabed in shallow water is high with strong variability and suspended matter concentrations may double within a few hours. Primary settling fluxes (from sedimentation traps) are less than 10 g m⁻² day⁻¹, whereas resuspension fluxes (evaluated from sedimentation flux gradients) are 15–20 times higher and the residence time for suspended matter in the water column is 1–2 days. Settling velocities of aggregates are on average six times higher than for individual particles resulting in an enhanced downward transport of organic matter. Wave-induced resuspension (four to six times per month) takes place with higher shear stresses on the bottom than current-induced resuspension (three to five times per month). The short residence time in the water column and the frequent resuspension events provide a fast operating benthic–pelagic coupling. Due to the high-energy input, the shallow water areas are nondepositional on time scales longer than 1–2 weeks. The sediment is sand partly covered by a thin fluff layer during low-energy periods. The presence of the fluff layer keeps the resuspension threshold very low (<0.023 N m⁻²) throughout the year. Evaluated from 3-D sediment transport modeling, transport from shallow to deep water is episodic. The net main directions are towards the Arkona Basin (5.5×10⁵ t per year) and the Bornholm Basin (3.7×10⁵ t per year). Energy input to the bottom in deep water is low and takes place much less frequently. Wave-induced resuspension occurs on average once per month. Residence time of particles (based on radioactive isotopes) in the water column is half a year and the sediment accumulation rate is 2.2 mm year⁻¹ in the Arkona Basin.     

Accurate INS position solution during GPS outages or degraded GPS

Temporary degraded GPS (DGPS) position loss, in circumstances such as an overhead bridge, can be alleviated by an inertial navigation system (INS) that uses onboard sensors, such as yaw and speed sensors, to determine vehicle position. This paper introduces a post-processing DGPS/INS integration approach based on using the INS solution during DGPS outages or periods of low accuracy DGPS position solutions. In this approach, the INS solution initialization is performed using the DGPS solution before DGPS position solution loss, and measurements from the Inertial Measurement Unit (IMU). The final post-processed INS solution is a weighted average of the INS forward and backward solutions. This work constitutes two parts: the INS initialization methods for different degrees of freedom vehicle positioning models, and the developed weighting model necessary to combine the forward and the backward solutions. The former part is essential in obtaining acceptable INS initial states for both the stand-alone INS or any post-processing or real time INS/GPS integrated system. The latter part is based on the use of the complementary error behaviours of the backward and the forward solutions, and can be used as a survey method with acceptable position solutions accuracies. Applying the forward/backward INS combined solution method on real data shows that the resultant INS solution accuracy is 35 cm or less over a 1000 m road segment. This method is used to survey freeways interchange road segments where 50% of the surveyed distance has no DGPS solution or has a degraded DGPS solution. The average achieved accuracy over the whole freeways interchange is around 40 cm over a 23 km distance.     

Abyssal seafloor waste isolation: the concept

The Naval Research Laboratory (NRL), with industry and university participation, conducted an assessment of the concept of isolating certain wastes (i.e., sewage sludge, fly ash from municipal incinerators, and contaminated dredged material) on the oceans' abyssal seafloor. In this assessment the advantages, disadvantages, and economic and environmental viability of potential engineering methods for achieving abyssal waste isolation were identified and compared. This paper presents background to the Abyssal Plains Waste Isolation (APWI) Project, describes the characteristics of the waste streams and quantities potentially available for disposal via the abyssal isolation concept, summarizes regulations affecting use of the abyssal seafloor for disposal of wastes, and introduces the technical and scientific premises underlying implementation of the concept.     

葡萄牙铁路电动车组的翻新改造

介绍了葡萄牙铁路对20世纪70年代生产的电动车组进行现代化改造和整修.     

WRC已经没有前途——莫斯利专访

一方面受到斯巴鲁和铃木退出的冲击，另一方面又面临“国际拉力挑战赛”（Intercontinental Rally Challenge）日益增长的威胁，WRC面对的是一个艰难的2009赛季，但是莫斯利却向我们说明什么才是锦标赛的未来，他又怎样使赛事更加稳固并且获得更多的利益。     

A note on costs per ton/mile at sea

This paper highlights the efect of several operating parameters that influence the short sea Ro-Ro transportation system. In view of the fact that many of the operating factors exhibit random variations a simulation model is constructed, the output of which is used for a simple economic model. The results for different alternatives are examined taking RFR as the basis of comparison.

Optimum solutions are found whenever possible. Some general conclusions on the relative economic superiority of the operating alternatives have been drawn. It is expected that the results and essentially the technique itself would be useful to designers, owners and operators of Ro-Ro ships and manufacturers of Ro-Ro equipment.     

Using risk analysis to determine the potential range of lifecycle costs for urban transit systems

Intense competition for limited public funding for urban transport projects can often result in proponents of individual schemes presenting minimized costs and maximized benefits to funding bodies to try to ensure that their scheme is chosen above others for funding. This presents public bodies with a problem, especially in an era when they are keen to attract private contributions for transit schemes. Risk modelling techniques can be of great assistance in ascertaining ranges of costs and benefits for individual submissions and deciding upon which projects should receive priority-not only those with greatest cost-benefit indices, but also those whose indices have low levels of associated risk to allay the fears of the traditionally risk averse private sector.     

The analysis of entropy models with equality and inequality constraints

Entropy models are emerging as valuable tools in the study of various social problems of spatial interaction. With the development of the modelling has come diversity. Increased flexibility in the model can be obtained by allowing certain constraints to be relaxed from equality to inequality. To provide a better understanding of these entropy models they are analysed by geometric programming. Dual mathematical programs and algorithms are obtained.     

Lights, camera and acoustics: Assessing macrobenthic communities at a dredged material disposal site off the North East coast of the UK

This study presents the results of a trial assessment based on a combination of sampling techniques at a dredged material disposal site located off the North East coast of the UK, over 2001 to 2004. The site was surveyed with a high-resolution sidescan sonar system producing a mosaic with 100% coverage of the survey area. Benthic communities and sediments were ground-truthed using a Hamon grab with a video camera. Additionally, the area was also sampled in 2003 with a Sediment Profile Imaging (SPI) camera, which complemented other techniques by providing in situ information on sediment quality, and biogenic activities. An assessment is made of the benefits of combining the results from conventional methods, principally using grab samples, with those from acoustic techniques and optical imaging devices to determine seafloor and macrobenthic conditions. This information has the potential to contribute to the enhancement of routine monitoring programmes within UK waters.