Numerical weight function method for the structural analysis of ships: a speedy direct calculation with condensed structural information

The weight function method was originally derived for crack problems to calculate stress intensity factors for arbitrary loading conditions. In this article, a numerical weight function method has been extended to formulate the structural response analyses of two-dimensional elasticity, plate-bending, and three-dimensional plate-structures by using the finite-element method. The solution procedure is based on the well-known Maxwell–Betti reciprocal theorem, which is applied to the original and properly defined auxiliary problems. The present numerical weight function may be considered as a finite-element version of a Green’s function in an integral equation solution scheme. Although ship structures are certainly analysed by the finite-element method in a practical design procedure, the weight function approach has not yet been realized. The method is very useful for the analysis of structures subjected to a vast range of loading conditions, because structural responses can simply be calculated by the inner product of the universal weight function and load vectors. The validity and convergence characteristics of the present method are investigated by two-dimensional elastic and plate-bending problems, respectively. Finally, the method is applied to the calculation of the response amplitude operator of a stress component at a critical structural detail of a double-hull tanker, and the speed and efficiency of the method are quantitatively discussed based on the practical results.     

Modelling high frequency force behaviour of hydraulic automotive dampers

Little information on automotive damper performance above 30 Hz is found in the published literature. Design of vehicles for low levels of noise, vibration and harshness requires attention to higher frequencies. This paper describes research into modelling damper behaviour at frequencies up to 500 Hz. The performance of a monotube damper was measured and the empirical data were used to evaluate a recently published parametric model. Methods of assessing prediction accuracy using transfer and coherence functions, and a wavelet-based transfer function were introduced. Modifications to the model were then developed to improve the prediction of high-frequency behaviour.     

Revisiting the application of simultaneous perturbation stochastic approximation towards signal timing optimization

Simultaneous Perturbation Stochastic Approximation (SPSA) has gained favor as an efficient optimization method for calibrating computationally intensive, “black box” traffic flow simulations. Few recent studies have investigated the efficiency of SPSA for traffic signal timing optimization. It is important for this to be investigated, because significant room for improvement exists in the area of signal optimization. Some signal timing methods and products perform optimization very quickly, but deliver mediocre solutions. Other methods and products deliver high-quality solutions, but at a very slow rate. When using commercialized desktop signal timing products, engineers are often forced to choose between speed and solution quality. Real-time adaptive control products, which must optimize timings within seconds on a cycle-by-cycle basis, have limited time to reach a high-quality solution. The existing literature indicates that SPSA provides the potential for upgrading both off-line and on-line solutions alike, by delivering high-quality solutions within seconds. This article describes an extensive set of optimization tests involving SPSA and genetic algorithms (GAs). The final results suggest that GA was slightly more efficient than SPSA. Moreover, the results suggest today's signal timing solutions could be improved significantly by incorporating GA, SPSA, and “playbooks” of preoptimized starting points. However, it may take another 5–10 years before our computers become fast enough to simultaneously optimize coordination settings (i.e., cycle length, phasing sequence, and offsets) at numerous intersections, using the most powerful heuristic methods, at speeds that are compatible with real-time adaptive solutions.     

Vehicle modeling with the exhaust system and experimental validation to investigate the exhaust vertical vibration characteristics excited by road surface inputs

An 8 degree-of-freedom (DOF) vehicle model is established to investigate the vertical vibration characteristics of an exhaust system excited by road surface inputs. The simplification of an exhaust system relevant to the vehicle model is discussed in detail, including the steps of exhaust modal analysis, definition of mass element, exhaust partitioning, parameter acquisition, and simplified exhaust validation. The vehicle model is developed based on a half-vehicle model, simulated using MATLAB/SIMULINK, and validated by comparing the simulation and experiment on various road profiles. Results show that the vehicle model effectively represents the dynamics of the vehicle characteristic in vertical vibration.     

船舶辅机浮筏半主动非线性隔振系统振动特性分析

磁流变阻尼器因其低耗能、响应迅速等特点而被广泛应用。文章采用一种改进的Bingham模型对船舶辅机浮筏隔振装置中的非线性磁流变阻尼力进行建模。该模型简单且含滞后特性,便于理论分析。对建立的船舶辅机浮筏隔振系统的非线性动力学模型,通过平均法求解船舶辅机浮筏半主动隔振系统的理论解,并运用Matlab对理论解进行数值仿真验证。以力传递率作为评价指标,分析了磁流变阻尼器各参数对隔振效果的影响规律。研究结果可为非线性船舶辅机浮筏隔振系统的设计提供理论依据,从而能更有效地控制船舶辅机的振动。     

Assessing economic activity in coastal areas: A shift‐share approach

Abstract

An essential aspect of economic analysis associated with planning efforts is identifying the composition of existing economic activity and understanding historical trends in economic change. The shift‐share model is a useful and inexpensive tool for this purpose. Shift‐share analysis evaluates changes in local economic activities relative to changes in a reference area (usually the state or nation). Economic change is separated into a reference area component, an industry mix component, and a local share component. These measure, respectively, the effect on the local economy due to changes in the reference area, factors specific to the local mix of industries, and the changing competitive position of the local area relative to the reference area.

A shift‐share analysis of Florida's coastal counties reveals that all grew much faster over the 1965–1975 period than did the national economy. This rapid growth is primarily a result of a net shift of economic activity toward the study area relative to the nation. However, a few coastal counties did exhibit a mix of slow‐growing industries. Specific industry results for Florida counties at the eighty‐industry level reveal that many industries showed significant shifts toward Florida's coastal counties. The performance of individual industries in the coastal counties generally exceeded that of the same industries in noncoastal counties.     

Considering “Coastal Carbon” in Existing U.S. Federal Statutes and Policies

Coastal ecosystems such as mangroves, salt marshes, and seagrasses provide important ecosystem services, including nursery habitat for fish, shoreline protection, and the recently recognized service of carbon sequestration and storage. When these wetland ecosystems are degraded or destroyed, the carbon can be released to the atmosphere, where it adds to the concentration of greenhouses gases (GHGs) that contribute to climate change. Many federal statutes and policies specifically require that impacts on ecosystem services be considered in policy implementation. Yet, no federal statute, regulation, or policy accounts directly for the carbon held in coastal habitats. There are a number of federal statutes and policies for which coastal carbon ecosystem services could reasonably be added to environmental and ecosystem considerations already implemented. We look at a subset of these statutes and policies to illustrate how coastal carbon ecosystem services and values might affect the implementation and outcomes of such statutes generally. We identify key steps for the inclusion of the ecosystem services of coastal habitats into the implementation of existing federal policies without statutory changes; doing so would increase the degree to which these policies consider the full economic and ecological impacts of policy actions.     

Competition and Ownership in Land Passenger Transport: The Sixth International Conference,Cape Town,South Africa,September 1999 - Part 1

The ability of conventional South African travel analysis practices to analyse adequately the travel needs of the poor is examined. The origins and nature of conventional practices are described, and it is observed that typically their scope has been limited to motorized modes, commutes and peaks. The paper reports on the findings of an activity diary survey administered in Cape Town that extended the conventional scope of analysis. An activity‐based survey method was selected because it typically yields higher rates of trip recall than other methods and is therefore relatively well suited to investigating travel behaviour in its fuller complexity. Selected findings of the survey are presented to demonstrate that travel occurring by non‐motorized modes, for non‐work purposes and during off‐peak periods, is considerable. It is argued that the conventional limitation in analytical scope can create serious misconceptions of the true nature of travel behaviour, particularly of low‐income households. By restricting the focus of analysis to motorized, work and peak period trip‐making, there is a risk of a routine bias being introduced in the way the urban passenger transport problem is understood, and in the nature of the interventions that are implemented as a result.     

Book review

The Country Bus. By John Hibbs (Newton Abbot: David & Charles, 1986.) [Pp. 160.] £8–95.