Effect of a drag-reducing polymer solution ejection on tip vortex cavitation

Experiments regarding the modification of the foil geometry and/or active or passive mass injection in the vortex core have been performed to investigate the possibility of inhibiting tip vortex cavitation. The ejection at very low flow rates of drag-reducing polymer solutions at the tip of hydrofoils and propeller blades has demonstrated effectiveness as a tip vortex cavitation inhibitor. This paper reports the results obtained with an elliptical hydrofoil, of 8cm maximum chord and 12cm haif-span, operating at Reynolds numbers, of =10⁶, much larger than those previously reported in the literature. Lift coefficients and critical cavitation numbers were determined for a variety of flow and polymer solution ejection conditions. Tangential and axial components of the mean velocity as well as velocity fluctuations along the vortex path were also measured. At 12.5 m/s free stream velocity and a variety of angles of attack, the ejection of a 500 ppm aqueous solution of a drag-reducing polymer at a flow rate of about 5 cm³/s leads to a decrease of up to 30% in the cavitation number. This occurs without modification of the lift coefficient and, hence, of the midspan bound circulation of the foil. Moreover, water injection does not cause any appreciable change in the cavitation numbers. The tangential velocity profiles along the vortex path during polymer ejection indicate that the potential region remains the same, while the viscous core dimension increases, and the maximum tangential velocity decreases substantially as compared to the no ejection or water ejection experiments. Thus, the pressure coefficients at the vortex axis are smaller than for the no ejection or water ejection cases and cause the reduction of the critical cavitation numbers. It is speculated that this inhibition effect is due only to swelling of the polymer solution when exiting the ejection orifice.List of symbols a core radius (distance to the vortex axis for maximum tangential velocity) - C ₁ lift coefficient - c _max maximum chord - Cp pressure coefficient at the vortex axis - Cp _min minimum pressure coefficient at the vortex axis - d _e diameter of the ejection port - m ejection flow rate - P reference pressure - P _v vapor pressure - V free stream velocity - V _a axial velocity - V _t tangential velocity - v _r radial component of the velocity resulting from jet swelling - x downstream distance from the tip of the foil - y, r distance to the vortex axis - angle of attack - r difference between the swollen jet and the ejection port radii - boundary layer thickness - tip vortex intensity - _d ( _de ) desinent cavitation number (with ejection) - _i ( _ie ) inception cavitation number (with ejection) - _ii normal stresses - viscosity - v kinematic viscosity - p specific mass     

An Iterative Approach to Road/Profile Identification Utilizing Wavelet Parameterization

A time domain simulation error method is presented in the following article for estimating the excitation of structural systems from local operational responses. The present study focuses on the case in which the location of the excitation is known a priori, as it is for the interaction of the road profile and the tyre patch for an automotive vehicle. The road profile is parameterized into coefficients using truncated sets of base functions which greatly reduce the number of unknowns in the resulting non-linear optimization problem. A complex non-linear model of a ground excited vehicle is utilized to illustrate the applicability and performance of the method.     

A multiple criteria approach for the evaluation of the rail transit networks in Istanbul

The deficiencies in the Istanbul transportation system have led the local authorities to plan several alternative transportation projects. In this paper three alternative rail transit network proposals are evaluated by using Analytic Hierarchy Process (AHP), a multiple criteria decision support system. The AHP facilitates decision-making by organizing perceptions, experiences, knowledge and judgments, the forces that influence the decision, into a hierarchical framework with a goal, scenarios, criteria and alternatives of choice. Based on this analysis, the decision makers have developed a new alternative as a combination of the most closely competing two alternative rail transit networks. This combination rail transit network is currently under construction.     

Space,money, life-stage,and the allocation of time

Demographic, socioeconomic, seasonal, and scheduling factors affect the allocation of time to various activities. This paper examines those variables through exploration of the 1990 Nationwide Personal Transportation Survey, which has been inverted to track activity duration. Two key issues are considered. First, how much can activity duration and frequency explain travel duration? The analysis shows activity duration has positive and significant effects on travel duration, supporting recent arguments in favor of activity based models. Second, which recent trend is the main culprit in the rise in travel: suburbanization, rising personal incomes, or female labor force participation? This paper examines the share of time within a 24-hour budget allocated to several primary activities: home, work, shop, and other. The data suggest that income and location have modest effects on time allocation compared with the loss of discretionary time due to working.

     

The Mixed Logit model: The state of practice

The mixed logit model is considered to be the most promising state of the art discrete choice model currently available. Increasingly researchers and practitioners are estimating mixed logit models of various degrees of sophistication with mixtures of revealed preference and stated choice data. It is timely to review progress in model estimation since the learning curve is steep and the unwary are likely to fall into a chasm if not careful. These chasms are very deep indeed given the complexity of the mixed logit model. Although the theory is relatively clear, estimation and data issues are far from clear. Indeed there is a great deal of potential mis-inference consequent on trying to extract increased behavioural realism from data that are often not able to comply with the demands of mixed logit models. Possibly for the first time we now have an estimation method that requires extremely high quality data if the analyst wishes to take advantage of the extended behavioural capabilities of such models. This paper focuses on the new opportunities offered by mixed logit models and some issues to be aware of to avoid misuse of such advanced discrete choice methods by the practitioner.     

Safety in the road environment: a driver behavioural response perspective

The existing literature on road safety suggests that a driver's perception of safety is an important influence on their driving behaviour. A challenging research question is how to measure the perception of safety given the complex interactions among drivers, vehicles and the road setting. In this paper, we investigate a sample of driver evaluations of the perception of safety associated with a set of typical road environments. A roundabout was selected as the context for the empirical study. Data was obtained by a computerised survey using the video-captured road and traffic situations. A controlled experiment elicited driver responses when faced with a mixture of attributes that describe the roundabout environment. An ordered probit model identified the contribution of each attribute to the overall determination of the perception of safety. An indicator of perceived safety was developed for a number of typical road and traffic situations and for different driver segments.     

An Extended Adaptive Kalman Filter for Real-time State Estimation of Vehicle Handling Dynamics

This paper considers a method for estimating vehicle handling dynamic states in real-time, using a reduced sensor set; the information is essential for vehicle handling stability control and is also valuable in chassis design evaluation. An extended (nonlinear) Kalman filter is designed to estimate the rapidly varying handling state vector. This employs a low order (4 DOF) handling model which is augmented to include adaptive states (cornering stiffnesses) to compensate for tyre force nonlinearities. The adaptation is driven by steer-induced variations in the longitudinal vehicle acceleration. The observer is compared with an equivalent linear, model-invariant Kalman filter. Both filters are designed and tested against data from a high order source model which simulates six degrees of freedom for the vehicle body, and employs a combined-slip Pacejka tyre model. A performance comparison is presented, which shows promising results for the extended filter, given a sensor set comprising three accelerometers only. The study also presents an insight into the effect of correlated error sources in this application, and it concludes with a discussion of the new observer's practical viability.     

预应力CFRP板加固钢板受拉试验研究

文章对预应力CFRP板双面加固钢板的轴心受拉静力行为进行了试验研究,首先采用一维线弹性理论和三维空间单元有限元模型分析预应力CFRP板双面加固钢板的轴心受拉应力分布,然后对粘贴不同预应力水平CFRP板的加固试件进行轴心受拉试验.结果表明:施加机械锚固装置后,钢板应力水平有很大降低,承载能力相应有很大提高,但刚度提高不大,而且机械锚固装置对保持高承载能力是必须的,应力分布理论值与试验值吻合得很好.试验中还观察到CFRP板高应力条件下很小的蠕变和预应力偏心作用所导致的弯曲应力.短期预应力损失主要由弹性压缩产生,循环荷载下的预应力损失很小.因此总预应力损失可简化计算为短期损失乘以一个安全系数,     

Risk management methods for the liner shipping industry: the case of the Bunker Adjustment Factor

Through the implementation of the Bunker Adjustment Factor (BAF), a shipowner is able to transfer the risk of fuel price fluctuation to the shipper. This and other surcharges are generally undesired by shippers who must pay this fee. The research presented provides an alternative method of risk management that is more effective than the current method, while responding to customer service demands for simplified tariffs. By strategic use of commodity futures, the shipowner is able to better reduce his/her risk exposure, transferring it to willing parties at the futures exchanges, thereby eliminating the need for the bunker surcharge.     

Aggregation of common-metric attributes in preference revelation and implications for willingness to pay

There is a growing interest in process heterogeneity in the way that individuals evaluate packages of attributes in real or hypothetical markets and make choices. We consider the role of the relative magnitude of pairs of attributes that are defined on a common metric (e.g., minutes or dollars), to look at the extent to which attributes might be added in preference revelation, in contrast to the commonly adopted single rule of compensatory behaviour. The focus is on a choice model specification that allows for different treatments of pairs of attributes across a sample, in contrast to studies that impose a single rule on all observations, and that does not require supplementary information on whether specific individuals claimed to have added up attributes; rather we structure a non-linear utility function that permits a probabilistic aggregation of each attribute. We translate this into a willingness to pay for travel time-savings for car commuters, in the context of tolling roads in Sydney, and contrast it with the results from the additive model, and a model where self-stated attribute processing information is taken into account. The empirical evidence suggests that mean willingness to pay increases when the addition rule is accounted for. This is a potentially important message for environmental applications where two or more attributes have a common metric.