Investigation of regenerative and Anti-lock Braking interaction

The use of a regenerative braking mode can reduce overall vehicle energy usage for most of the most common drive cycles. However, a number of technical issues restrict the use of regenerative braking for all possible braking situations. These issues are concerned with two key limitations. The first is related to physical limitations of the applied regenerative braking system, e.g. Electric Motor (E-Motor) power limits; energy storage device capacity and vehicle load transfer etc. The second limitation results from the potentially detrimental interaction between regenerative braking and the Anti-locking Braking System (ABS). The first type of limitation can, to some extent, be alleviated by suitable choice of hardware and, as a consequence, will not be discussed further in this paper. The second type of limitation concerns the regenerative braking strategies during an ABS event. Some of the regenerative braking strategies designed and investigated within the Low Carbon Vehicle Technology Project (LCVTP) will be described and analyzed in this paper. A comparison of competing strategies is made and conclusions are drawn together with suggestions for further research. The work has been progressed as a part of a major research programme; namely the LCVTP, which has been conducted within an extensive industrial and academic partnership, mutually funded by the European Regional Development Found and Advantage West Midlands.     

Using data assimilation in laboratory experiments of geophysical flows

Data assimilation is used in numerical simulations of laboratory experiments in a stratified, rotating fluid. The experiments are performed on the large Coriolis turntable (Grenoble, France), which achieves a high degree of similarity with the ocean, and the simulations are performed with a two-layer shallow water model, using the SEEK method for data assimilation. Since the flow is measured with a high level of precision and resolution, a detailed analysis of a forecasting system is feasible. The procedure is tested for the baroclinic instability of a two-layer vortex. It is shown that the method of data assimilation properly captures the details of the initial flow perturbation. Then it is shown by sensitivity studies that an error of the model, attributed to small non-hydrostatic effects, can be distinguished from the error growth associated with the intrinsic instability of the system. Finally, it is experimentally demonstrated that the velocity field in the lower layer can be well controlled by data assimilation limited to the top layer.     

Regression modelling of the employment durations of UK seafaring officers in 1999

This paper presents the results of an econometric analysis of the duration of voyages undertaken by NUMAST deck and engineer officers in 1998-1999. Earlier papers examined the employment profile of the officers, and compared voyage patterns across organization type, company nationality, flag of registry, and ship type. Analysis of the various cross-tabulations of employment duration appeared to show that the key driver is ship type. Using regression analysis, it is shown that ship type does indeed have a significant influence on duration, as does ship size. Flag, organizational type and company type were all found to be statistically unimportant.     

Exploration of route choice behavior with advanced traveler information using neural network concepts

A model of driver's route choice behavior under advanced traveler information system (ATIS) is developed based on data collected from learning experiments using interactive computer simulation. The experiment subjected drivers to 32 simulated days in which they were to choose between the freeway or a side road. A neural network model is used as a convenient modeling technique in this initial phase of the analysis. The results indicated that most subjects made route choices based mainly on their recent experiences. It was also demonstrated that route choice behaviors are related to the personal characteristics as well as the characteristics of the respective routes. Travel experiences have less effect on the choice of the side road compared to the freeway and the results indicate that the prediction accuracy of the model, the acceptance rate of advice, and the quality of advice are closely correlated. The model developed here was for advice consistently provided at a level of 75 percent accuracy. The paper concludes with a discussion of experimental limitations and suggestions for future research.     

Lights, camera and acoustics: Assessing macrobenthic communities at a dredged material disposal site off the North East coast of the UK

This study presents the results of a trial assessment based on a combination of sampling techniques at a dredged material disposal site located off the North East coast of the UK, over 2001 to 2004. The site was surveyed with a high-resolution sidescan sonar system producing a mosaic with 100% coverage of the survey area. Benthic communities and sediments were ground-truthed using a Hamon grab with a video camera. Additionally, the area was also sampled in 2003 with a Sediment Profile Imaging (SPI) camera, which complemented other techniques by providing in situ information on sediment quality, and biogenic activities. An assessment is made of the benefits of combining the results from conventional methods, principally using grab samples, with those from acoustic techniques and optical imaging devices to determine seafloor and macrobenthic conditions. This information has the potential to contribute to the enhancement of routine monitoring programmes within UK waters.     

Seaport Development and Coastal Management Programs: A National Overview

Oysters have been harvested on the east coast of Australia for many thousands of years. Coastal Aboriginal communities used the extensive estuarine oyster resource and may have farmed oysters by establishing shell cultch beds in shallow areas of estuaries. The British colonization of Australia commenced in 1788 and oysters were initially used for food and production of lime. Concerns about unsustainable exploitation led to introduction of legislation that directed the oyster industry to aquaculture in 1884. Translocation of oyster stock for fattening, from New Zealand to Australian east coast estuaries, was encouraged. Here evidence is presented that this activity resulted in “mudworm disease” appearing in oyster farming estuaries on the Australian east coast between 1880 and 1900. The pandemic permanently destroyed natural sub-tidal oyster reefs and forced the oyster industry to adopt avoidance farming techniques including intertidal farming to cope with mudworm.     

基础设计中的可靠度评估

阐述基于可靠度理论的基础设计的评估.首先总结具有结构抗力和荷载效应2个基础变量的结构可靠度基本理论.结构抗力的不确定性可以由统计学上的平均值和变异系数(cou或Ω)来描述.变异系数指变量的标准差和平均值的比值.敏感度分析的结果显示结构抗力的变异系数(ΩR)在其应用范围之内时,在分析结构可靠度方面扮演着相当重要的角色.基于这些阐述,在预先指定的风险水平(pf)上ΩR一定有其上限.当结构抗力呈正态分布的时候,这个极限ΩR独立于荷载效应随机性.和安全指数β成反比.安全指数可以定义为在标准正态分布区间极限状态到原点之间的最小距离.在这个极限ΩR之下,结构可以在预定风险水平之下安全工作.中心安全系数(Fs)可以由结构抗力和荷载效应的变异系数根据平方关系求得.然而,一些情况下结构抗力为非正态分布的情况并不少见.因此,等效正态分布的概念可以用来得到非正态分布结构抗力的ΩR极限.地质方面的随机变量可能是正态分布,也可能是非正态分布,结构抗力中基本变量之间的关系可能是线性也可能是非线性,或者非常复杂以致于结构抗力只能通过有限元分析才能得到.在此情况下,随机数可以通过蒙特卡洛模拟技术获得.拟合的结构抗力的分布可以在随机试验的基础上通过配合度检验确定.现实中,土壤的力学特性不是各向同性的,同样也不能认为是单一材料的,它们的不确定性是不可以被忽略的.简便的设计方式认为不确定参数是常数,并且通过使用定值的安全系数来确定结构截面,设计原则没有将土壤参数对安全系数的影响考虑进去.参考计算出来的失效概率表明,确定值的安全系数法无法保证足够的安全.因此,在某种情况下,安全系数大于等于3,对于结构容许承受能力,并不能认为太保守.     

Paleoclimatic evolution of the Galician continental shelf (NW of Spain) during the last 3000 years: from a storm regime to present conditions

A multiproxy study of the sedimentary record carried out on gravity core CGPL00-1 retrieved from the outer Galician continental shelf (NW of Spain) has allowed us to establish the main climate fluctuations affecting the region during the Upper Holocene. Grain size, TOC, C/N ratio, biogenic opal and planktonic foraminifera are the main analysed parameters. Lithology and grain size distribution lead to identify two sedimentary sequences: a lower half mainly composed by glauconitic sand and a muddy upper half. A chronology has been established based on three AMS radiocarbon ages, 907 cal. BC, 898 cal. BC and 1399 AD, and the aforementioned sedimentary sequences. The obtained radiocarbon ages are the first dated sediment samples for the Galician continental shelf. Geochemical markers show different trends in both sequences: low and/or fluctuating values in the sandy sequence and high and relatively constant values in the upper muddy sequence. The whole sandy interval is interpreted to be a nearly instantaneous deposit from a distal storm ebb current. The muddy interval was deposited in a stable and low-energy marine environment, similar to that found on the present outer shelf. The shift from a storm-dominated shelf to a low-energy environment took place synchronous with the Subboreal/Subatlantic transition, when an increase in storminess appears related to climatic instability. Transitional planktonic foraminiferal assemblage dominates the whole record, although a change to more abundant cold water species at 1420 AD, may relate to an intense upwelling pulse, probably reinforced by colder atmospheric temperatures during the Little Ice Age (LIA). Despite the presence of an upwelling regime since 1420 AD, lesser amount of opal has accumulated in the outer shelf due to enhanced offshore transport and stronger remineralization.     

Introduction to an innovative crew composition approach based on safety/operational and financial requirements

This paper proposes a tool to estimate crew composition based on safety/operational and financial requirements. As there is a tendency of ship owners to implement improved technologies on board their vessels, there is no systematic way to predict their potential effect on crew size and composition (typically determined by flag state authorities on a case-to-case basis) nor on the type and complexity of on board duties new technologies might dictate. The main aim of this paper is to develop a tool to assist in determining crew composition, by taking into account both administration’s and the ship owner’s point of view. Based on data collected from ship owners, a data mining technique is implemented in order to form a generalized framework that estimates crew composition as a function of ship type, size, and degree of automation. The agreement of model predictions with records from specific (vessel) cases is very good in terms of safety (for operations such as watchkeeping, mooring/unmooring, loading/unloading). The specific intended use of this tool is to help a ship owner decide whether it is cost-beneficial to retrofit a conventional vessel with advanced technologies that would potentially entail a reduced crew (probably dealing with different and more complex on board duties). Its main benefits are that it can be used to estimate crew composition before any vessel construction or upgrade has actually taken place and that it allows crew composition to be easily adapted to the technological evolution of ship systems even at their current rapid pace.