An appropriate unidirectional wave spectrum model for the Strait of Hormuz

The objective of this paper is to introduce an appropriate unidirectional wave spectrum model for the Strait of Hormuz. The research is focused on assessing performance of standard wave spectrum models in the region. By evaluating such models based on valuable measurement data recently published, the calibration procedure has been conducted on such standard models to reach a better concordance between a modified standard spectral model and observed field spectra. The calibration is performed initially with respect to four distinct directions related to four available measurement stations. So, it results in four sets of coefficients for a nominated model. Next, it is continued to reach just one model insensitive to directions. Results clearly showed that the International Towing Tank Conference (ITTC) model is more appropriate than Joint North Sea Wave Project (JONSWAP) and Pierson and Moskowitz (PM) models in this area, even without any calibration. However, modifications have been successful on improving the conformity of the model.     

Numerical simulation of the spreading dynamic responses of the multibody system with a floating base

To simulate the dynamic responses of the multibody system with a floating base when the upper parts spread with a certain sequence and relative speed, the homogeneous matrix method is employed to model and simulate a four-body system with a floating base and the motions are analyzed when the upper parts are spread sequentially or synchronously. The rolling, swaying and heaving temporal variations are obtained when the multibody system is under the conditions of the static water along with the wave loads and the mean wind loads or the single pulse wind loads, respectively. The moment variations of each joint under the single pulse wind load are also gained. The numerical results showed that the swaying of the floating base is almost not influenced by the spreading time or form when the upper parts spread sequentially or synchronously, while the rolling and the heaving mainly depend on the spreading time and forms. The swaying and heaving motions are influenced significantly by the mean wind loads. The single pulse wind load also has influences on the dynamic responses. The torque of joint 3 and joint 4 in the single pulse wind environment may be twice that in the windless environment when the system spreads with 60 s duration.     

Numerical investigation of transmission of low frequency sound through a smooth air-water interface

It is the traditional belief that sound transmission from water to the air is very weak due to a large contrast between air and water impedances. Recently, the enhanced sound transmission and anomalous transparency of air-water interface have been introduced. Anomalous transparency of air-water interface states that the sound generated by a submerged shallow depth monopole point source localized at depths less than 1/10 sound wavelength, can be transmitted into the air with omni-directional pattern. The generated sound has 35 times higher power compared to the classical ray theory prediction. In this paper, sound transmission through air-water interface for a localized underwater shallow depth source is examined. To accomplish this, two-phase coupled Helmholtz wave equations in two-phase media of air-water are solved by the commercial finite element based COMSOL Multiphysics software. Ratios of pressure amplitudes of different sound sources in two different underwater and air coordinates are computed and analyzed against non-dimensional ratio of the source depth (D) to the sound wavelength (λ). The obtained results are compared with the experimental data and good agreement is displayed.     

Three-dimensional numerical investigation of the separation process in a vortex tube at different operating conditions

Air separators provide safe, clean, and appropriate air flow to engines and are widely used in vehicles with large engines such as ships and submarines. In this operational study, the separation process inside a Ranque–Hilsch vortex tube cleaning (cooling) system is investigated to analyze the impact of the operating gas type on the vortex tube performance; the operating gases used are air, nitrogen, oxygen, carbon dioxide and nitrogen dioxide. The computational fluid dynamic model used is equipped with a three-dimensional structure, and the steady-state condition is applied during computations. The standard k–ε turbulence model is employed to resolve nonlinear flow equations, and various key parameters, such as hot and cold exhaust thermal drops, and power separation rates, are described numerically. The results show that nitrogen dioxide creates the greatest separation power out of all gases tested, and the numerical results are validated by good agreement with available experimental data. In addition, a comparison is made between the use of two different boundary conditions, the pressure-far-field and the pressure-outlet, when analyzing complex turbulent flows inside the air separators. Results present a comprehensive and practical solution for use in future numerical studies.     

Modeling the flow regime near the source in underwater gas releases

Recent progress in calculating gas bubble sizes in a plume, based on phenomenological approaches using the release conditions is a significant improvement to make the gas plume models self-reliant. Such calculations require details of conditions Near the Source of Plume (NSP); (i.e. the plume/jet velocity and radius near the source), which inspired the present work. Determining NSP conditions for gas plumes are far more complex than that for oil plumes due to the substantial density difference between gas and water. To calculate NSP conditions, modeling the early stage of the plume is important. A novel method of modeling the early stage of an underwater gas release is presented here. Major impact of the present work is to define the correct NSP conditions for underwater gas releases, which is not possible with available methods as those techniques are not based on the physics of flow region near the source of the plume/jet. We introduce super Gaussian profiles to model the density and velocity variations of the early stages of plume, coupled with the laws of fluid mechanics to define profile parameters. This new approach, models the velocity profile variation from near uniform, across the section at the release point to Gaussian some distance away. The comparisons show that experimental data agrees well with the computations.     

峡谷河流的挂网式人行悬索桥设计

为了降低峡谷河流人行悬索桥的造价,本文提出一种峡谷河流的双曲抛物面空间缆索挂网式人行悬索桥,将双曲抛物面空间缆索网分散锚固于峡谷河流两侧的悬崖陡壁岩石之上,取消桥塔,取消吊索体系,管桁架式桥面加劲梁直接搁置在双曲抛物面空间缆索网之上,节约造价,装配式施工简便。结合某150m跨径峡谷河流人行景观悬索桥,建立Midas有限元分析模型,开展动力模态特性分析研究,验证了双曲抛物面空间缆索挂网式人行悬索桥结构具有良好的抗风稳定性。     

An investigation into the isolation performance of mono-and bi-stable systems

Motivated by the need for improving the isolation performance, many research studies have been performed on isolators with nonlinear characteristics. Based on the shape of their phase portrait, such devices can be configured as either a mono-or bi-stable isolator. This paper focuses on investigating the relative performance of these two classes under the same excitations. Force transmissibility is used to measure the isolation performance, which is defined in terms of the RMS of the ratio of the transmitted force to the excitation force. When the system is subjected to harmonic excitation, it is found that the maximum reduction of the force transmissibility in the isolation range using Quasi-Zero stiffness is achieved. When the system is subjected to random excitation, it has the same effect of Quasi-Zero stiffness. Further, optimum damping can be changed with stiffness and has minimum value.     

Assessing the impact of the built environment on travel behavior: a case study of Buffalo,New York

Assessing the impact of characteristics of the built environment on travel behavior can yield valuable tools for land use and transportation planning. Of particular interest are planning models that can estimate the effects of ‘smart growth’ planning. In this paper, a post-processor method of quantifying and searching for relationships among many aspects of travel behavior and the built environment is developed and applied to the Buffalo, NY area. A wide scope of travel behavior is examined, and over 50 variables, many of which are based on high-detail data sources, are examined for potentially quantifying the built environment. Linear modeling is then used to relate travel behavior and the built environment, and the resulting models may be applied in a post-processor fashion to travel models to provide some measure of sensitivity to built environment modifications. The study’s findings demonstrate that mode choice is highly correlated to measures of the built environment, and that many of the principles of smart growth appear to be a valid way to encourage non-vehicle travel. Home-based VHT and VMT appear to be affected by the built environment to a lesser degree.