Simulation Study on Multi-Rate Time-Frequency Analysis of Non-Stationary Signals

A new time-frequency analysis method is proposed in this study using a multi-rate signal decomposition technique for the analysis of non-stationary signals. The method uses a multi-rate filter bank for an improved non-stationary signal decomposition treatment, and uses the Wigner-Ville distribution (WVD) analysis for signal reconstruction. The method presented in this study can effectively resolves the time and frequency resolution issue for non-stationary signal analysis and the cross-term issue typically encountered in time-frequency analysis. The feasibility and accuracy of the proposed method are evaluated and verified in a numerical simulation.     

Multi-Band Hybrid Mobile Phone Antenna Based on Electromagnetic Coupling

This research presents a multi-band hybrid mobile phone antenna based on electromagnetic coupling,which can be applied to mobile handheld devices, occupying a small board space of 39.7 mm × 15.6 mm on the system circuit board. By adding resonant and coupled branch instead of multi-feed on the traditional bent antenna,this design provides four wide operating bands of 0.772—0.998 GHz, 1.540—1.600 GHz, 1.680—2.270 GHz and2.300—2.690 GHz with the hybrid feature of planar inverted-F antenna(PIFA), L-shape, U-shape and S-shape structures, which cover nine-band, i.e., GSM850, GSM900, GPS1575, DCS1800, PCS1900, IMT200, LTE2300,LTE2600 and Blue Tooth/Wi-Fi. Ansoft software HFSS is used in this research to make the antenna performance better and the operating principle of the proposed antenna is described in detail. Result of simulation reveals that the maximum gains of these four wide bands are 2.20,-0.99, 4.01 and 4.05 dBi, respectively. Moreover, this research also tests the return loss(S11) of the fabricated antenna with the vector network analyzer and the result is in accordance with the simulation result on the whole. There are four wide resonant frequencies which cover nine-band of wireless wide area network(WWAN), wireless local area network(WLAN) and long term evolution(LTE), when the available bandwidth is better than 6 d Bi return loss.     

Effects of Heat Intensity and Inflow Wind on the Reactive Pollution Dispersion in Urban Street Canyon

This paper investigates the impacts of heating intensity and inflow wind speed on the characteristics of reactive pollutant dispersion in street canyons using the computational fluid dynamic (CFD) model that includes the transportation of NO, NO₂, and O₃ coupled with NO-NO₂-O₃ photochemistry. The results indicated that the heat intensity and inflow wind speed have a significant influence on the flow field, temperature field and the characteristics of reactive pollutant dispersion in and above the street canyon. With the street canyon bottom heating intensity increasing, NO, NO₂ and O₃ concentrations in street canyon are decreased. The O₃ concentration reductions are even more than the NO and NO₂ concentrations. Improving the inflow wind speed can significantly reduce the NO and NO₂ concentrations within street canyons. But the O₃ concentrations have a slight rise with wind speed increasing. The results would be useful for understanding the interrelation among reactive vehicle emissions, and provide references for urban planners.     

Research on Spatially Adaptive High-Order Total Variation Model for Weak Fluorescence Image Restoration

Photoacoustic imaging acquires the absorption contrast of biological tissue with ultrasound resolution. It has been broadly investigated in biomedicine for animal and clinical studies. Recently, a micro-electro-mechanical system (MEMS) scanner has been utilized in photoacoustic imaging systems to enhance their performance and extend the realm of applications. The review provides a recap of recent developments in photoacoustic imaging using MEMS scanner, from instrumentation to applications. The topics include the design of MEMS scanner, its use in photoacoustic microscopy, miniature imaging probes, development of dual-modality systems, as well as cutting-edge bio-imaging studies.     

Estimation of Load-Induced Damage and Repair Cost in Post-Tensioned Concrete Rocking Walls

Post-tensioned concrete rocking walls might be used to avoid severe seismic damage at the base of structural walls, decrease residual drift, and lessen post-earthquake repair costs. The prediction of load-induced damage to the rocking wall resulting from seismic loading can provide an extremely valuable tool to evaluate the status and safety of structural concrete walls following earthquakes. In this study, the behavior and the damage state of monolithic, self-centering, rocking walls, as a new type of concrete rocking wall, are investigated. The nonlinear mechanical behavior of the wall is first modeled numerically, and subsequently the mechanical parameters from the numerical simulation are used to generate the local damage index. The results from the damage index model are compared with the full-scale test results, confirming the viability of the numerically based damage index method for estimating the seismically induced damage in concrete walls. Moreover, the estimated damage can be utilized as a qualitative and quantitative scale to assess the status of the wall following seismic loading events. Finally, an equation is proposed to estimate the repair cost based on the predicted damage state for the studied structural system.     

A Discrete Bat Algorithm for Disassembly Sequence Planning

Based on the bat algorithm (BA), this paper proposes a discrete BA (DBA) approach to optimize the disassembly sequence planning (DSP) problem, for the purpose of obtaining an optimum disassembly sequence (ODS) of a product with a high degree of automation and guiding maintenance operation. The BA for solving continuous problems is introduced, and combining with mathematical formulations, the BA is reformed to be the DBA for DSP problems. The fitness function model (FFM) is built to evaluate the quality of disassembly sequences. The optimization performance of the DBA is tested and verified by an application case, and the DBA is compared with the genetic algorithm (GA), particle swarm optimization (PSO) algorithm and differential mutation BA (DMBA). Numerical experiments show that the proposed DBA has a better optimization capability and provides more accurate solutions than the other three algorithms.     

Product Quality Evaluation Method Based on Product Gene Theory

Traditional quality inspection based product quality evaluation method with complex process has high operating cost and requires more professional knowledge. To remove the above limitation, this paper leads product gene theory into product quality evaluation. Methods of quality influencing factors based modeling and encoding are established. Combined with similarity theory and product gene theory, a product gene similarity analysis based quality evaluation method is proposed. The proposed method is low cost, operates easily and requires less specialized knowledge. A case study is conducted to prove the correctness and feasibility of this method.     

An exploratory analysis of joint-activity participation characteristics using the American time use survey

This paper presents a detailed exploratory analysis of joint activity participation characteristics using the American Time Use Survey (ATUS). As a very large nationwide survey that explicitly elicited information on both household and non-household companions for each activity episode, the ATUS is ideally suited for this analysis. Several intuitive and interesting results are obtained. Joint episodes are found to be of longer durations, significantly likely to take place at the residence of other people, and often confined to certain time periods of the weekday. In addition, important differences in these characteristics are also observed based on activity purpose, companion type, and the day of the week. These findings are intended to provide the basis for the justification of detailed collection of joint activity–travel participation information in household activity–travel surveys, and also as a stimulant for further empirical analysis and modeling of joint activity participation behavior.

Application of large eddy simulation in the performance study of wave blocker

The configuration and aerodynamic performance of the inlet system are important aspects in the process of installing a gas turbine on a naval vessel. Under the requirements, large eddy simulation （LES） is used to simulate the three-dimensional fluid flow in the wave blocker of a marine inlet filter. The Smagorinsky-Lilly sub-grid model was used to model motions of small-scale structures. During numerical simulation, the SIMPLE algorithm was applied. The central-differencing spatial discretization scheme and the second order accuracy finite difference for the temporal discretization were used. Simulation gives satisfactory distribution of the vorticity fields and turbulent kinetic energy. Compared with the k-ε turbulent model, the results of LES are better for the distribution of parameters. The results of experimental study in a small-scale wind tunnel indicate that numerical calculation has higher accuracy. Therefore, the methods used are worthy of reference and introduction for the design of an inlet system.