Preview Control Algorithms for the Active Suspension of an Off-Road Vehicle

The potential performance improvement using preview control for active vehicle suspension was first recognized in the late nineteen sixties. All work done since that time has been based on optimal control theory using simple vehicle models.

In this article, the performance of quarter vehicle preview controllers when applied to a real off-road vehicle is simulated using both two degree of freedom quarter and ten degree of freedom full vehicle models. The results, which are compared with non-preview active and conventional passive suspensions, confirm that preview control reduces vertical acceleration of the body centre of gravity, which results in improved ride quality. Further, reductions in pitch and roll motion result from smaller vertical displacements of the vehicle quarters. Coupling between quarters, through the vehicle body, appears to have a smoothing effect on the control.

As an alternative to optimal control theory based controllers, a simple ad hoc preview controller based on isolating the vehicle body from dynamic loads transmitted through the suspension is proposed. Simulation results show that such a controller outperforms the optimal control theory based controllers over small discrete disturbances but responds poorly to disturbances encountered from other than steady state.     

柴油机故障诊断专家系统知识库设计

在分析柴油机故障诊断知识特点的基础上,采用模糊化方法对柴油机运行状态参数进行处理,采用综合型知识方式来表达柴油机故障诊断知识,采用多库多层次的方式组织知识库,并对知识库采取一系列方式进行管理与维护。应用表明,柴油机故障诊断专家系统的预报准确率较高,具有较强的实用性。     

Dual extended Kalman filter for vehicle state and parameter estimation

The article demonstrates the implementation of a model-based vehicle estimator, which can be used for combined estimation of vehicle states and parameters. The estimator is realised using the dual extended Kalman filter (DEKF) technique, which makes use of two Kalman filters running in parallel, thus 'splitting' the state and parameter estimation problems. Note that the two problems cannot be entirely separated due to their inherent interdependencies. This technique provides several advantages, such as the possibility to switch off the parameter estimator, once a sufficiently good set of estimates has been obtained. The estimator is based on a four-wheel vehicle model with four degrees of freedom, which accommodates the dominant modes only, and is designed to make use of several interchangeable tyre models. The paper demonstrates the appropriateness of the DEKF. Results to date indicate that this is an effective approach, which is considered to be of potential benefit to the automotive industry.     

Modelling of wheels and rail discontinuities in dynamic wheel-rail contact analysis

A classification of wheel-rail contact is given. Difference is made between modelling of a running wheel with continuous single-point-contact, as is common practice in wheel-rail contact analysis, and a wheel with transient double- or multi-point-contact, which may occur for rail irregularities with curvatures larger than that of the wheel circumference. It is shown that application of the first model for these irregularities will strongly underestimate the contact forces as it does not describe occurring mechanisms correctly. Further, it is shown that in principle it is not possible to describe the second type of contact fully correct with a lumped wheel model. Both wheel models are formulated mathematically for some basic contact cases. Afterwards, results are applied to a linear track model. Analytical closed-form solutions are found in the frequency domain for arbitrary type of contact and numerically transformed to the time domain. Finally, the necessity is shown to avoid situations where transient multiple-point-contact may occur (like rail joints) in practice.     

Neuro-Fuzzy Control of a Tracked Vehicle Featuring Semi-Active Electro-Rheological Suspension Units

This paper presents vibration control of a tracked vehicle installed with electro-rheological suspension units (ERSU). As a first step, an in-arm type ERSU is designed, and its spring and damping characteristics are evaluated with respect to the intensity of electric fields. Subsequently, a 16 degree-of-freedom model for a tracked vehicle equipped with the proposed ERSU is established followed by the formulation of a neuro-fuzzy controller. This controller takes account for both ride quality and steering stability by adopting a weighting parameter between two performance requirements. The parameter is appropriately determined by employing a fuzzy algorithm associated with two fuzzy variables: the vertical speed of the body and the rotational angular speed of the wheel. Control performances to isolate unwanted vibration from bump and random road excitations are evaluated through computer simulations. In addition, maximum speed of the vehicle with 6 Watt power absorption is investigated with respect to the road roughness.     

Dynamic Estimation of Road Bank Angle

Road bank angles have a direct influence on vehicle dynamics and lateral acceleration measurement. A vehicle stability control system that knows road bank angle has an advantageous capability in achieving desired control sensitivities for maneuvers on ice and snow, among all surfaces, while avoiding false/nuisance activation on a banked road. Since neither lateral velocity nor road bank angle are directly measurable in current vehicle systems due to economical reasons, the major challenge is to differentiate the bias induced by road bank disturbances from actual effect of vehicle lateral dynamics in current measurements. This paper proposes a method of road bank estimation and provides theoretical background for the decoupling effort of lateral dynamics and road disturbances involved in bank estimation.     

Fatigue damage calculation for oil tanker and container ship structures

The fatigue behaviour of longitudinal stiffeners of oil tankers and container ships, subjected to dynamic loads, is analysed. The following dynamic load components are considered: hull girder vertical wave bending moment, alone and combined with the horizontal wave bending moment, hydrodynamic pressure and inertial forces caused by cargo acceleration.

The spectral method was selected to calculate the fatigue damage, based on S—N curves and Miner's rule. Following this approach, the fatigue damage may be calculated as a function of a stress parameter Ω_p, which represents the cumulative effect of wave induced loads in the unit of time and incorporates the combined effects of stress level and its occurring frequency.

Simple formulas for Ω_p of oil tankers and container ships are given, obtained from the results of hydrodynamic analyses performed on several ships, in different wave environments.

Several examples show the applicability of the methods to real ship structures. The method, however, still needs to be calibrated because of the simplifying hypotheses introduced in the loading conditions.     

Fundamental Issues in Suspension Design for Heavy Road Vehicles

Heavy road vehicles play an important role in the economy of many countries by providing an efficient means of transporting freight. Such vehicles can also have a significant impact on safety, the infrastructure and the environment. The design of the suspension affects the performance of the vehicle in terms of ride, infrastructure damage, suspension working space, energy consumption, rollover stability, yaw stability, braking and traction. The published literature on suspension design for heavy road vehicles is reviewed. It is found that extensive knowledge exists, but that there are areas where improved understanding is needed. Areas identified as fundamental issues requiring attention include ride discomfort criteria, secondary suspensions, and controllable suspensions. Two issues in particular are examined in detail: suspension tuning and suspension configuration. In the tuning of suspension parameter values for vibration performance, numerical optimisation techniques have been used extensively, but generic tuning strategies have not been widely developed. Modal analysis is proposed as a technique for gaining the insight into vehicle vibration behaviour necessary to enable tuning strategies to be devised. As an example, the technique is applied to the pitch-plane vibration of a tractor-semitrailer. In analyses of new suspension configurations or concepts, comparison with alternative concepts is not always made. Lack of such comparisons makes the selection of an optimum concept difficult. Analysis of alternative concepts using simple mathematical models, and comparison of their performance using common criteria, is advocated for enabling informed selection of an optimum. An example involving two alternative roll control systems is used to demonstrate the issue.