Parameter identification for a LuGre model based on steady-state tire conditions

The purpose of this study was to effectively identify parameters for a LuGre friction model based on experimental measures. In earlier work related to this study (Yang et al., 2009), which was based on the characters of polygonal wear (Sueoka and Ryu, 1997), we showed a frictional vibration model for a mass on a moving belt. This model reflected lateral vibrations caused by velocity and toe-in angle. An important aspect of the present study is the improved friction model. A previous friction model, which divided the process into four parts, expressed the sable excited vibration well but failed to reflect the hysteresis loop change when vehicles accelerated or decelerated continuously. A LuGre friction model can solve this problem, but several model parameters must be obtained experimentally. We measured contact width and length of tires as vertical pressure changed; this provided a theoretical basis for apparent stiffness of a unit of tire tread. Based on tire data from Bakker E’s article in a SAE paper from 1987, we identified the Stribeck exponent and Stribeck velocity in LuGre. Then, the results were implemented in a vibration system that verified the rationality of the data.     

Engine performance and toxic gas analysis of biobutanol-blended gasoline as a vehicle fuel

A comprehensive study evaluating the performance of biobutanol-blended gasoline in passenger cars was conducted because biobutanol is considered a better biofuel than bioethanol as it has no water solubility and it has a higher caloric value, giving it a higher energy value. Several kinds of samples—suboctane gasoline, 8 volume percentage and 16 volume percentage biobutanol—blended gasoline, and a 10 volume percentage MTBE-blended market sample (as the oxygencontaining gasoline)-were tested to evaluate the engine performance in terms of the detergency of the intake valves and combustion chambers, power, emissions, and fuel efficiency. Additionally, the toxicity of the emissions from these biobutanolblended samples was tested in order to assess the viability of biobutanol as one of the competitive potential substitutes for MTBE as an oxygenator in the near future. The results show that biobutanol-blended gasoline samples had relatively better detergency, relatively higher power, and similar levels of emissions compared with those of MTBE-blended gasoline. Formaldehyde was emitted from all of the samples at almost the same levels and within the error range, whereas biobutanolblended gasoline samples emitted approximately three times the amount of acetaldehyde than did the suboctane gasoline. This study shows that biobutanol is one of the best alternative bioalcohol fuels for use in the near future.     

GPS-based optimization of plug-in hybrid electric vehicles’ power demands in a cold weather city

Using the WPG03 duty cycle developed from global positioning data collected in Winnipeg, Canada, real world energy demands and costs are modeled. Three types of plug-in hybrid electric vehicles, four temperatures and two charging scenarios are compared to a vehicle with an internal combustion engine. Cold temperatures are shown to greatly affect vehicle operation energy costs, which is an important consideration for cold weather cities such as Winnipeg. The largest energy cost savings are obtained for smaller-battery plug-in hybrids that had the opportunity to charge during the day.     

交通拥堵反思

通过对交通拥堵进行反思,认为交通拥堵是充满活力的成功城市的伴生品,应从不同角度考虑拥堵问题.提出了十项有别于传统观点的提议,主要包括:机动性至关重要,交通拥堵是社会、经济活力的象征;道路扩容效果短暂,并会诱发潜在需求,但仍可带来一定的社会、经济效益;土地使用对出行行为的改变需要长期的努力;紧凑型发展会加剧交通拥堵;降低...     

Minimum Efficient Scale (MES) and preferred scale of container terminals

The decision on the scale of a port terminal affects the terminal’s managerial, operational and competitive position in all the phases of its life. It also affects competition structures in the port in which the terminal is operating, and has a potential impact on other terminals. Port authorities and terminal operators need to know the scale of the terminal when engaging in concession agreements. In economic theory the scale of a plant/firm is typically defined in relation to the Minimum Efficient Scale (MES), the long-run output where the internal economies of scale are fully exploited. However, there are a number of theoretical and empirical indications that in ports the scale of a terminal is commonly guided by a combination of the MES and other determining factors. The “preferred” scale is the result of a complex interaction between the MES, the port governance framework and objectives, the market size and structure, technological change and operational considerations, physical and geographical limitations, and the business patterns of shipping lines. This study analyses the factors resulting in a preferred container terminal scale that in most of the times is different from the MES. The analysis of the technical, market-related and governance-related factors is supported by theoretical and empirical insights that illustrate the presence of a range of actual ”preferred” scales of terminal concessions that usually are different, below or above, MES.     

船闸水工建筑物的检测与评估技术

采用现代测试技术及分析方法对船闸水工建筑物进行定期的检测评估可有效延长建筑物的使用寿命。提出了船闸水工建筑物检测与评估工作的一般流程,包括船闸现状的调查、检测方案的制定、现场检测的实施、检测报告的形成、评估单位的划分、复核验算的考虑因素、评估内容及方法及评估报告的形成,并就相关的检测与评估关键技术进行了阐述。     

电磁仿真技术在异步牵引电机转子优化设计中的应用

针对解析法无法对电机转子局部结构导致的损耗和励磁电流进行定量分析的问题,文章提出在采用解析法进行初步方案计算的基础上,引入电磁仿真技术,并以190 kW异步牵引电机为例,分析和计算了附加损耗以及空载电流随通风孔数量的变化,通过试验验证了采用电磁仿真技术的有效性.     

Mesoscale subduction at the Almeria–Oran front: Part 1: Ageostrophic flow

This paper presents a detailed diagnostic analysis of hydrographic and current meter data from three, rapidly repeated, fine-scale surveys of the Almeria–Oran front. Instability of the frontal boundary, between surface waters of Atlantic and Mediterranean origin, is shown to provide a mechanism for significant heat transfer from the surface layers to the deep ocean in winter. The data were collected during the second observational phase of the EU funded OMEGA project on RRS Discovery cruise 224 during December 1996. High resolution hydrographic measurements using the towed undulating CTD vehicle, SeaSoar, traced the subduction of Mediterranean Surface Water across the Almeria–Oran front. This subduction is shown to result from a significant baroclinic component to the instability of the frontal jet. The Q-vector formulation of the omega equation is combined with a scale analysis to quantitatively diagnose vertical transport resulting from mesoscale ageostrophic circulation. The analyses are presented and discussed in the presence of satellite and airborne remotely sensed data; which provide the basis for a thorough and novel approach to the determination of observational error.     

Origin–destination synthesis for aviation network data: examining hub operations in the domestic and international US markets

Hub‐and‐spoke networking is a key feature of current aviation markets in which hubs, as connecting points, function to consolidate and redistribute flows. This indicates that observation of traffic on a segment does not necessarily convey information about the origin to destination routing of passenger journeys because of the unavoidable detours in the system. This paper examines the heterogeneity of the flow composition in domestic and international US markets, which in turn allows us to observe the variation of operations across major hubs. A modified Route Flow Estimator for origin–destination synthesis (or origin–destination matrix estimation) is designed to decompose the segment traffic into itinerary‐based passenger trips. Several public and commercial databases, which are easily accessible, are exploited (and reconciled) for the model in order to (i) generate possible trip itineraries using those segment markets, and (ii) link data‐driven operational conditions with the underlying segment flows. The results are validated with US domestic trip observations and empirical knowledge related to the air transportation system. Then, the variability of the hub operations is examined based on sensitivity tests using the model parameters. From the resolution of itinerary‐based estimates, we observe that major airports' hub operations are spatially uneven, particularly with respect to domestic and international connecting passengers. Copyright © 2017 John Wiley & Sons, Ltd.     

The social context of informal commuting: Slugs, strangers and structuration

Despite considerable interest in the role of social interactions and social context on transportation, there have been very few attempts to explore specific cases of social interaction influencing transportation systems. This paper explores the social practice of slugging, an informal system of carpooling in the Washington, DC area. Slugging emerged in response to the establishment of Virginia’s High Occupancy Vehicle (HOV) lanes in the early 1970s, as single drivers picked up riders alongside the road (slugs) in order to meet the requirements for driving in the less congested HOV lanes. Drawing on the work of sociologist Anthony Giddens, as well as the sociological insights of Georg Simmel and Stanley Milgram, we suggest that the practice of slugging highlights the processes of institutionalization and structuration. This paper details how the region’s mass transportation policies and urban culture have combined to result in an institutionalized practice with particular norms and logics of behavior. We conclude that looking at specific cases where social context has affected transportation, like slugging, could provide useful insights on the impact of social context on transportation policies and systems.