Key technologies of ship remote control system in inland waterways under ship-shore cooperation conditions北大核心CSCD

［Objective ］ To meet the requirements of remotely controlling ship in curved, narrow and crowded inland waterways, this paper proposes an approach that consists of CNN-based algorithms and knowledge based models under ship-shore cooperation conditions. ［Method］On the basis of analyzing the characteristics of ship-shore cooperation, the proposed approach realizes autonomous perception of the environment with visual simulation at the core and navigation decision-making control based on deep reinforcement learning, and finally constructs an artificial intelligence system composed of image deep learning processing, navigation situation cognition, route steady-state control and other functions. Remote control and short-time autonomous navigation of operating ships are realized under inland waterway conditions, and remote control of container ships and ferries is carried out. ［Results］The proposed approach is capable of replacing manual work by remote orders or independent decision-making, as well as realizing independent obstacle avoidance, with a consistent deviation of less than 20 meters. ［Conclusions］The developed prototype system carries out the remote control operation demonstration of the above ship types in such waterways as the Changhu Canal Shenzhou line and the Yangtze River, proving that a complete set of algorithms with a CNN and reinforcement learning at the core can independently extract key navigation information, construct obstacle avoidance and control awareness, and lay the foundation for inland river intelligent navigation systems. © 2022 Journal of Clinical Hepatology. All rights reserved.     

Plate scanning tools to obtain travel times in traffic networks

The management of vehicle travel times has been shown to be fundamental to traffic network analysis. To collect travel time measurement, some methods focus solely on isolated links or highway segments, and where two measurement points, at the beginning and at the end of a section, are deemed sufficient to evaluate users' travel time. However, in many cases, transport studies involve networks in which the problem is more complex. This article takes advantage of the plate scanning technique to propose an algorithm that minimizes the required number of registering devices and their location in order to identify vehicles candidates to compute the travel times of a given set of routes (or subroutes). The merits of the proposed method are explained using simple examples and are illustrated by its application to the real network of Ciudad Real.     

Effect of nozzle orifice diameter on diesel spray tip penetration according to various spray models for CFD simulation with widely varying back pressure

CFD simulations of spray tip penetration with the standard KIVA3V, ‘original gas jet’ and ‘Normal gas jet profile with breakup length formula’ (NGJBL) spray models were performed to investigate the effects of nozzle orifice size and ambient gas density combinations on the spray penetration. The accuracy of the CFD simulation results was estimated by comparing them with available experimental data. The ambient gas density was varied in 12 kg/m³ intervals from 12 to 69 kg/m³ for each nozzle orifice diameter. The nozzle orifice diameters used were 119, 140, 183 and 206 mm. A total of 20 cases in the CFD simulations were considered with combinations of the 4 nozzle orifice diameters and 5 ambient gas densities. CFD simulations with the NGJBL spray model were more accurate than those with either the standard KIVA3V or gas jet spray models as the nozzle orifice diameter and ambient gas density was increased. The NGJBL and original gas jet model is more effective in predicting the spray tip penetration near the nozzle tip region.     

Nanoparticle emission characteristics and reduction strategies by boost pressure control and injection strategies in a passenger diesel engine

This research attempted to analyze nanoparticles and other harmful exhaust emissions in accordance with injection strategies and air-fuel ratio (AFR) changes for small diesel engines. The emission characteristics were analyzed in the medium-speed condition, which is the main driving range of a diesel engine. In the case of particulate matter (PM), the number of particles was measured, analyzed, and compared to identify the correlation and emission characteristics of nanoparticles by using a dilution device and condensation particle counter (CPC), which are international standards for particle measurement recommended by the Particulate Measurement Programme (PMP). The engine torque tended to be reduced as pilot injections were added, and the torque was increased by the increased boost pressure, but reduced by the exhaust pressure increase in a part of the low-load range. The number of nanoparticles was not influenced greatly by the change in AFR, but the reduction effect on the PM weight was great depending on the boost pressure increase. In addition, the number of nanoparticles tended to increase as the fuel injection timing became closer to TDC in all conditions, and its difference became larger with an increase in AFR. In addition, in the case of the pilot injection, nanoparticle emission showed similar characteristics depending on the main injection timing, but it was increased by advanced injection timing when performing the main injection only, and the number of the nanoparticles increased as pilot injections were added. Last, the optimal conditions for EMS calibration were analyzed by selecting the conditions of torque reduction and NOx increase within 5 % from all of the engine operating conditions; optimized conditions are presented.     

Vibration reduction of H/Shaft using an electromagnetic damper with mode change

The objective of this study is to develop a damper that can reduce the amplitude of vibration in various frequency ranges. Previous H/Shaft vibration reduction methods work in a passive way. A dynamic damper reduces the amplitude of vibration at its first mode, but vibration still appears at the second mode. A mass damper or hollow shaft can shift the natural frequency to a lower or higher region. The fixed operating frequency prevents vibration from being reduced outside the operating frequency range. The proposed damper uses electromagnets as either masses or actuators to change the damper mode between dynamic damper mode and mass damper mode. The electromagnetic damper (EMD) can change its mode to respond to the vibration excitation at both low and high frequencies. The vibration reduction performance was evaluated by FRF tests in laboratory and vehicle conditions. The results were compared with those of a dynamic damper and indicate that the amplitude of vibration is reduced by 95.6 % when the EMD is implemented on an H/Shaft, whereas only 61.9 % vibration reduction is achieved by the dynamic damper.     

A study on the stability of a motorcycle wheel–swingarm suspension with chain transmission

The present study describes a possible driving mechanism for a self-excited oscillation observed in motorcycle dynamics, often referred to as chatter. This phenomenon, affecting the performance of road racing motorcycles, has been simulated in straight running braking manoeuvres with multibody motorcycle models. It involves rear suspension bounce and driveline oscillation in the frequency range between 17 and 22?Hz. A simplified model of a motorcycle rear suspension with chain transmission is proposed and its stability in equilibrium configurations is studied via eigenvalue analysis. The sensitivity with respect to all its governing parameters is analysed by means of stability maps and the self-excitation mechanism is explained with the aid of energy balance analysis and phase diagrams. It is found that the key role for the instability onset is played by the gradient of the nonlinear characteristic slip function of the tyre.     

Insights into vehicle trajectories at the handling limits: analysing open data from race car drivers

Race car drivers can offer insights into vehicle control during extreme manoeuvres; however, little data from race teams is publicly available for analysis. The Revs Program at Stanford has built a collection of vehicle dynamics data acquired from vintage race cars during live racing events with the intent of making this database publicly available for future analysis. This paper discusses the data acquisition, post-processing, and storage methods used to generate the database. An analysis of available data quantifies the repeatability of professional race car driver performance by examining the statistical dispersion of their driven paths. Certain map features, such as sections with high path curvature, consistently corresponded to local minima in path dispersion, quantifying the qualitative concept that drivers anchor their racing lines at specific locations around the track. A case study explores how two professional drivers employ distinct driving styles to achieve similar lap times, supporting the idea that driving at the limits allows a family of solutions in terms of paths and speed that can be adapted based on specific spatial, temporal, or other constraints and objectives.     

低阻通风船体的远程控制测试平台开发（英文）

This paper addresses the development and testing of a remotely controlled boat platform with an innovative air-ventilated hull. The application of air cavities on the underside of ship hulls is a promising means for reducing hydrodynamic drag and pollutant emissions and increasing marine transportation efficiency. Despite this concept’s potential, design optimization and high-performance operation of novel air-cavity ships remain a challenging problem. Hull construction and sensor instrumentation of the model-scale air-cavity boat is described in the paper. The modular structure of the hull allows for easy modifications, and an electric propulsion unit enables self-propelled operation. The boat is controlled remotely via a radio transmission system. Results of initial tests are reported, including thrust, speed, and airflow rate in several loading conditions. The constructed platform can be used for optimizing air-cavity systems and testing other innovative hull designs. This system can be also developed into a high-performance unmanned boat.     

A havelock source panel method for near-surface submarines

A panel method is described for calculating potential flow around near-surface submarines. The method uses Havelock sources which automatically satisfy the linearized free-surface boundary condition. Outputs from the method include pressure field, pressure drag, wave resistance, vertical force, trim moment and wave pattern. Comparisons are made with model tests for wave resistance of Series 58 and DARPA SUBOFF hulls, as well as with wave resistance, lift force and trim moment of three length-to-diameter variants of the DSTO Joubert submarine hull. It is found that the Havelock source panel method is capable of determining with reasonable accuracy wave resistance, vertical force and trim moment for submarine hulls. Further experimental data are required in order to assess the accuracy of the method for pressure field and wave pattern prediction. The method is implemented in the computer code “HullWave” and offers potential advantages over RANS-CFD codes in terms of speed, simplicity and robustness.