Modeling the interactions between car and bicycle in heterogeneous traffic

In this paper, a new cellular automata model is proposed to simulate the car and bicycle heterogeneous traffic on urban road. To capture the complex interactions between these two types of vehicles, a novel occupancy rule is adopted in the proposed model to consider the variable lateral distances of mixed vehicular traffic. Based on massive simulations, microscopic fundamental diagrams under different bicycle densities are devised. With these, the bicycle's spilling behavior is then investigated and discussed. In order to reflect the interference of a bicycle on a car, the interference transformation from friction state to block state is modeled explicitly. Finally, different simulation results under different occupancy rules indicate that the constant and fixed occupancy rule adopted in the previous studies might lead to overestimation of car flux in the heterogeneous traffic flows with different bicycle densities. Copyright © 2013 John Wiley & Sons, Ltd.     

The planning and analysis of a new group rapid transit system: the SkyCabs monobeam system in Auckland

This paper examines a case study of the SkyCabs system as a way to alleviate some of the traffic problems of Auckland, New Zealand. SkyCabs is an elevated two-way monobeam carrying light eight-seater cabs on tracks on each side of the beam, available on demand, providing fast, pollution-free, unimpeded travel above the footpath with panoramic views of the city. The aim of this study is to investigate the attractiveness of implementing the SkyCabs system to and from Auckland central business district (CBD) and Auckland international airport by examining four variables: different routes, different number of stops/stations, different passenger demand levels, and different number of cabs in the system. The analysis utilizes geographical information system and simulation tools for the various scenarios considered. The results show that it is possible to assess the cost–benefit of alternative routes in terms of those four variables and rate of return on investment.     

Analysis of factors that may be essential in the decision to fly on fully autonomous passenger airliners

This research investigates factors that influence opinion in the decision to fly on fully autonomous passenger airliners primarily from the perspective of aviation and technology professionals. Bayesian statistical inference and a two‐level fractional factorial survey are used to sample passengers' views on fully autonomous airliners. Eight trust, safety, and cost factors are incorporated into a vignette set in the future. Factors include automation levels, safety records, liability guarantees, airline integrity, and service disruptions. Dependent variables exist in five post‐vignette questions and essentially ask “Would you” or “Would you not” be willing to fly on a fully autonomous airliner? Sixteen versions of the vignette, each with unique trust, safety, and cost levels, present varying (unknown) degrees of influence to the survey respondents. For every demographic, the research shows a 99% statistically significant difference between the “prior” and “posterior” sampled population proportions willing to fly. The most significant positive influence involves integrity characteristics of the airline, while the most negative influence relates to life insurance liability guarantees. Research from 2003 suggested that this mode of travel would be acceptable to only 10.5% of respondents. When the 2003 research is used as a Bayesian prior probability, the resulting posterior probability for the demographics sampled can be modeled as a beta distribution, indicating 95% probability that the sampled proportion of the population willing to fly is between 33.2% and 36.4%. After adjusting for age and profession demographics to match the US population, the 95% probability bounds on the proportion willing to fly are 31.35% and 34.15%. Copyright © 2015 John Wiley & Sons, Ltd.     

Vulnerability analysis for large-scale and congested road networks with demand uncertainty

To assess the vulnerability of congested road networks, the commonly used full network scan approach is to evaluate all possible scenarios of link closure using a form of traffic assignment. This approach can be computationally burdensome and may not be viable for identifying the most critical links in large-scale networks. In this study, an “impact area” vulnerability analysis approach is proposed to evaluate the consequences of a link closure within its impact area instead of the whole network. The proposed approach can significantly reduce the search space for determining the most critical links in large-scale networks. In addition, a new vulnerability index is introduced to examine properly the consequences of a link closure. The effects of demand uncertainty and heterogeneous travellers’ risk-taking behaviour are explicitly considered. Numerical results for two different road networks show that in practice the proposed approach is more efficient than traditional full scan approach for identifying the same set of critical links. Numerical results also demonstrate that both stochastic demand and travellers’ risk-taking behaviour have significant impacts on network vulnerability analysis, especially under high network congestion and large demand variations. Ignoring their impacts can underestimate the consequences of link closures and misidentify the most critical links.     

Multi‐objective highway alignment optimization using a genetic algorithm

The available highway alignment optimization algorithms use the total cost as the objective function. This is a single objective optimization process. In this process, travel‐time, vehicle operation accident earthwork land acquisition and pavement construction costs are the basic components of the total cost. This single objective highway alignment optimization process has limited capability in handling the cost components separately. Moreover, this process cannot yield a set of alternative solutions from a single run. This paper presents a multi‐objective approach to overcome these shortcomings. Some of the cost components of highway alignments are conflicting in nature. Minimizing some of them will yield a straighter alignment; whereas, minimizing others would make the alignment circuitous. Therefore, the goal of the multiobjective optimization approach is to handle the trade‐off amongst the highway alignment design objectives and present a set of near optimal solutions. The highway alignment objectives, i.e., cost functions, are not continuous in nature. Hence, a special genetic algorithm based multi‐objective optimization algorithm is suggested The proposed methodology is demonstrated via a case study at the end.     

Application of new parameterizations of gas transfer velocity and their impact on regional and global marine CO2 budgets

One of the dominant sources of uncertainty in the calculation of air–sea flux of carbon dioxide on a global scale originates from the various parameterizations of the gas transfer velocity, k, that are in use. Whilst it is undisputed that most of these parameterizations have shortcomings and neglect processes which influence air–sea gas exchange and do not scale with wind speed alone, there is no general agreement about their relative accuracy.The most widely used parameterizations are based on non-linear functions of wind speed and, to a lesser extent, on sea surface temperature and salinity. Processes such as surface film damping and whitecapping are known to have an effect on air–sea exchange. More recently published parameterizations use friction velocity, sea surface roughness, and significant wave height. These new parameters can account to some extent for processes such as film damping and whitecapping and could potentially explain the spread of wind-speed based transfer velocities published in the literature.We combine some of the principles of two recently published k parameterizations [Glover, D.M., Frew, N.M., McCue, S.J. and Bock, E.J., 2002. A multiyear time series of global gas transfer velocity from the TOPEX dual frequency, normalized radar backscatter algorithm. In: Donelan, M.A., Drennan, W.M., Saltzman, E.S., and Wanninkhof, R. (Eds.), Gas Transfer at Water Surfaces, Geophys. Monograph 127. AGU,Washington, DC, 325–331; Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] to calculate k as the sum of a linear function of total mean square slope of the sea surface and a wave breaking parameter. This separates contributions from direct and bubble-mediated gas transfer as suggested by Woolf [Woolf, D.K., 2005. Parameterization of gas transfer velocities and sea-state dependent wave breaking. Tellus, 57B: 87–94] and allows us to quantify contributions from these two processes independently.We then apply our parameterization to a monthly TOPEX altimeter gridded 1.5° × 1.5° data set and compare our results to transfer velocities calculated using the popular wind-based k parameterizations by Wanninkhof [Wanninkhof, R., 1992. Relationship between wind speed and gas exchange over the ocean. J. Geophys. Res., 97: 7373–7382.] and Wanninkhof and McGillis [Wanninkhof, R. and McGillis, W., 1999. A cubic relationship between air−sea CO2 exchange and wind speed. Geophys. Res. Lett., 26(13): 1889–1892]. We show that despite good agreement of the globally averaged transfer velocities, global and regional fluxes differ by up to 100%. These discrepancies are a result of different spatio-temporal distributions of the processes involved in the parameterizations of k, indicating the importance of wave field parameters and a need for further validation.     

Modelling and Analysis of Turning Motion of a Subsurface Mapping AUV with Split-Hull Design

There is much need for autonomous underwater vehicles (AUVs) for inspection and mapping purposes. Most conventional AUVs use torpedo-shaped single-rigid hull, b...     

Home-to-work commuting,urban form and potential energy savings: A local scale approach to regional statistics

The link between transport energy consumption and land use patterns has been the focus of a considerable amount of academic works over the past decades. While many empirical researches are backed up with solid statistical techniques, most of them do not fully consider the influence of scale underlying empirical quantitative investigations. Using fine-scale home-to-work commuting data for Wallonia (Belgium), this paper re-evaluates Breheny’s (1995) assertion that urban structure should hold the characteristics of major cities if substantial energy savings are to be achieved. A local scale approach highlights efficient settlements in terms of transport energy consumption not only within major towns, but also within remote rural areas. Furthermore, results suggest that influencing the urban form following local energy efficient examples rather than regional ones could also yield significant gains, without an extreme policy stance of re-urbanisation in major cities.     

Port authorities view state coastal management programs

Abstract

An estuarine sanctuary is a store of public values due to the ecological, cultural, recreational, aesthetic, historic, and economic services provided by the preserve. These values may be expected to increase over time because of (1) growth in the population demanding estuarine services, (2) growth in the willingness to pay for such services, and (3) growth in the actual quality and quantity of services which are provided by a protected natural system. Thus an estuarine sanctuary will be more valuable to future generations than to current generations. When weighing the cost and benefits of a preservation or development decision, a preservation decision which seems currently undesirable may in fact be socially beneficial when growth in the value of estuarine services is included.