Influence of external restraint distribution on welding buckling of thin plate butt joint北大核心CSCD

［Objectives］It is easy to produce buckling distortion when welding thin plate butt joints, which affects the construction period, cost and performance, but this can be controlled by applying external restraints. ［Methods ］ First, a butt welding test of a thin plate under external restraints is carried out, and the out-of-plane deformation is measured by the optical surface scanning method. At the same time, finite element (FE) models in a free state and external restraint state are established, and the thermal mechanical phenomena of the two models are subjected to thermal-elastic-plastic FE analysis (TEP FE). The influence of different external restraint distributions on the welding buckling distortion of the joints is then studied, and reasons for controlling welding buckling distortion are analyzed from the perspective of longitudinal plastic strain and longitudinal contraction force.［Results ］ The out-of-plane deformation of the corresponding model is in good agreement with the measured results, and milder than the out-of-plane deformation of the model in a free state. When external restraints are applied, the longitudinal plastic strain of the weld and its adjacent metal decreases, and the longitudinal contraction force of the thin plate also decreases.［Conclusions ］ The results verify that external restraints can effectively control welding buckling distortion, and the control effects are different depending on the external restraint distribution. © 2023 Chinese Journal of Ship Research. All rights reserved.     

Analysis of ultimate uniaxial compressive strength of stiffened panel considering influence of shear load北大核心CSCD

［Objective］This study aims to explore the law of the critical compression stress of stiffened panels under the influence of in-plane shear load, and whether in-plane shear load combined with lateral pressure will introduce a strong coupling effect. ［Method ］ To this end, nonlinear finite element (FE) software ABAQUS is used to perform numerical simulation analysis under combined loads on a group of FE models. A limit state equation/curve is then derived from the dimensionless calculation results based on the minimum square error method. ［Results］The results show that the influence law of in-plane shear load on the critical compression stress of stiffened panels is clarified, and a limit state equation of stiffened panels that considers the effect of shear load is obtained. ［Conclusion］The limit state equation in this paper can provide references for modifying the ultimate strength of stiffened panels under the influence of in-plane shear load. © 2023 Chinese Journal of Ship Research. All rights reserved.     

A computerized household activity scheduling survey

Household activity scheduling is widely regarded as the underlying mechanism through which people respond to emerging travel demand management policies. Despite this, very little fundamental research has been conducted into the underlying scheduling process to improve our understanding and ability forecast travel. The experimental survey approach presented in this paper attempts to fill this gap. At the core of the survey is a Computerized Household Activity Scheduling (CHASE) software program. The program is unique in that it runs for a week long period during which time all adult household members login daily to record their scheduling decisions as they occur over time. An up-front interview is used to define a household's activity agenda and mode availability. A sample of 41 households (66 adults and 14 children) was used to assess the performance of the survey. Analysis focuses on times to completion, daily scheduling steps, activity-travel patterns, and scheduling time horizons. Overall, the results show that the computer-based survey design was successful in gathering an array of information on the underlying process, while minimizing the burden on respondents. The survey was also capable of tracing traditionally observed activity-travel outcomes over a multi-day period with minimal fatigue effects. The paper concludes with a detailed discussion on future survey design, including issues of instrument bias, use of the Internet, and improved tracing of spatial behaviour. Future use of the survey methodology to enhance activity-travel diary surveys and stated responses experiments is also discussed. This revised version was published online in June 2006 with corrections to the Cover Date.     

奔驰A200加装带照明的梅赛德斯三叉星徽

<正>加装说明:本文和大家分享一下2018年上市的奔驰新款A200加装带前部照明的梅赛德斯三叉星徽(如图1所示)的方法和步骤。此加装文档适用于奔驰型号为177.1,本文以新款A200为例进行介绍。加装步骤:此步骤总体来说分为两大类,即拆卸和安装,那么我们先来说拆卸部分:1.拆下散热器格栅中的梅赛德斯三叉星徽。2.如果适用,完全卸下空气过滤器外壳并将其连同接线一起放到一旁。不要将空气过滤器外壳的上部与空气过滤器外壳的下部分开。     

A real-time multi-vehicle simulator for longitudinal controller design

This paper presents a new multi-vehicle simulator for platoon simulation. The main new feature of the developed simulator is a network structure for the real-time simulation of multiple vehicles, each with a detailed powertrain and engine model. It has a small initial delay, which is determined by the number of connected PCs, but the actual simulation is performed and displayed in real-time after this initial and one-time delay. Several longitudinal controllers, including a PID controller with gain scheduling, an adaptive controller, and a fuzzy controller, are also implemented in the simulator. Various system parameters can be modified interactively in the simulator screen, which is very useful for simulating a platoon of heterogeneous vehicles, in which vehicles with different dynamics and different longitudinal controllers may be involved. The simulator provides an excellent tool to develop vehicle longitudinal controllers and to study platoon behaviors. The developed simulator is also effective in testing the effects of nonlinearities neglected in the controller design phase, such as actuator delays and gear shifting schedule.     

Study on the preciseness of hot spot stress of web-stiffened cruciform welded joints derived from shell finite element analyses

A new simple and accurate shell FE-based structural Hot Spot Stress (HSS) determination method for web-stiffened cruciform joints has been proposed. Local stress of welded joints in full-scale bulk carrier (BC)’s lower stool models subject to bending and pressure loadings are examined. HSSs determined by the proposed method are compared with those derived by Lotsberg’s method and the conventional 0.5t-1.5t extrapolation. As results, following are found:

(1)

The local stress of full-scale BC lower stool models with various stool angle and plate thickness can be calculated accurately solely from shell FE results by means of the proposed method.

(2)

HSSs of welded joints in full-scale BC lower stool models subject to bending and pressure loadings derived by the proposed method show good agreement with the target HSSs determined from fine solid models. This demonstrates the validity of the proposed method for actual ship structures under the real load.

(3)

The excessive safety allowance of HSS determined by the conventional 0.5t-1.5t extrapolation can be reduced substantially by adopting Lotsberg’s method or our proposal. The proposed HSS determination method gives more accurate estimates compared to Lotsberg’s method under the conditions chosen, and the application range of the proposed method is equal to or wider than Lotsberg’s method.

     

Distribution and diet of larval and juvenile Arctic cod (Boreogadus saida) in the shallow Canadian Beaufort Sea

The distribution and diet of larval and juvenile Arctic cod (Boreogadus saida) were studied during summer 2005 in the coastal Canadian Beaufort Sea. A total of 275 individuals were captured and the highest abundance was observed at station depths of 20–30 m. This corresponds well with the location of the frontal zone where the Mackenzie River plume water and open sea water meet. Diet examinations were performed on 220 Arctic cod, which were found undamaged from sampling. We observed a gradual decrease in prey number per fish and increase in prey size as larvae grew which corresponded to a shift from Rotifera and nauplii towards larger copepodid stages. However, at all sizes, the larvae remain generalists and feed on a broad range of organisms. Environmental changes due to climate warming could have a two-fold impact on fish larvae feeding in the studied region. First, the potential for increased primary production may lead to increased zooplankton production that may impact the feeding and nutrition positively. On the other hand, greater discharge of turbid water from the Mackenzie River may reduce light penetration in the water column that may negatively influence the ability of visual predators to successively forage.     

Propagation and origin of warm anomalies in the Angola Benguela upwelling system in 2001

Warmer than average sea surface temperatures were observed by the Tropical Rainfall Mission Microwave Imager in the Angola Benguela Current system in late austral summer 2001 and persisted for about three months. These coastal anomalies extended offshore by 1 to 4° longitude and were not due to local ocean atmosphere interaction or relaxation of the upwelling favorable southerly winds. Instead, they were remotely forced by ocean atmosphere interaction in the Tropical Atlantic. Satellite remote sensing and a linear ocean model suggest that relaxation of trade winds along the equator triggered Kelvin waves that crossed the basin within a month in early 2001. Westerly wind anomalies were also observed in December 2000 and January 2001 over most of the Tropical Atlantic contributing to a warm preconditioning due to an enhancement of the oceanic annual cycle. This led to abnormal sea level heights near equatorial Africa that propagated southwards along the coast towards the Angola Benguela Frontal zone. This process increased the seasonal penetration of warm and salty water of tropical origin into the Angola Benguela upwelling system.     

Application of Models in the Design of Underwater Electromagnetic Signature Reduction Systems

The susceptibilities of surface ships and submarines to electromagnetic influence mines and detection systems are generally determined with the aid of mathematical and physical scale models of the vessel's underwater field signatures. In addition, they are the primary tools used in the design of signature reduction systems. However, limitations of model accuracy need to be recognized and identified through verification and validation, and they should not be used blindly as a substitute for critical engineering analysis. The proper use of underwater electromagnetic field models of naval vessels in designing signature reduction systems will be presented.     

Large-scale physical controls on phytoplankton growth in the Irminger Sea Part I: Hydrographic zones, mixing and stratification

Hydrographic surveys in three consecutive seasons in the Irminger Sea in 2001/2002 have revealed six physical regimes (zones) in which different surface mixing and spring re-stratification processes dominate. They are the South Irminger Current, the North Irminger Current, the Central Irminger Sea, the Polar-origin East Greenland Current, the Atlantic-origin East Greenland Current and the Reykjanes Ridge. The variations in restratification processes in particular have significant implications for the timing of shallow spring mixed layer development and therefore the timing and strength of the spring bloom. The relative roles of heat and freshwater in controlling re-stratification are examined for each hydrographic zone, and it is shown that the simplest concept of solar warming generating spring stratification is appropriate for the Irminger Current and the central Irminger Sea. However in the East Greenland Current and the Reykjanes Ridge zones, the springtime arrival of fresh or saline water at the surface dominates re-stratification and generates the earliest and strongest spring blooms of the region. In the cool fresh centre of the Irminger Sea the relatively low chlorophyll-a throughout the year cannot be wholly explained by stratification or nutrient concentrations. Details of the annual cycle in temperature, salinity, chlorophyll-a and nutrients are presented for each hydrographic zone.