The design of tram priority at traffic signals

This paper outlines the guidelines being used to introduce tram priority at traffic signals in Melbourne. Where techniques being used to meet the guidelines are of interest they are briefly outlined. Similarly, where it has been found that it is not possible to meet the full requirements of the guidelines, the deficiencies of current techniques are outlined and areas for further investigation put forward.     

The effects of non-optimal pricing and investment policies for transportation facilities

A simulation model was used to show the impacts of non-optimal pricing and investment timing policies for a major airport and an urban expressway. It was found that: the losses of economic surplus due to non-optimal pricing and investment policies were relatively small (less than 1% of the net present value of economic surplus for optimal pricing and investment), that marginal cost pricing covers the capital cost of all but the first increment of capacity, that higher user fees will permit the facilities to break even with relatively small losses of economic surplus, that marginal cost pricing has some effect relative to existing pricing policies in delaying the dates new capacity is required and achieving better capacity utilization, and that the shape of the cost function has a substantial impact on the amount of capacity required.     

SiMoCo: the viability of a prototype platform for a coastal monitoring system: a case study

Coastal zones are among the most productive areas in the world, offering a wide variety of valuable habitats and ecosystems services. Despite the low population density in the Brazilian coastal zone, their distribution is quite concentrated near some coastal cities and state capitals. This concentration places enormous pressure on coastal resources. Therefore, the main objective of this paper is to present an overview on the current status of SiMoCo (Sistema de Monitoramento Costeiro, or Coastal Monitoring System in English) project as a possible early warning system that can be integrated to the Brazilian Coastal Management Information System. This prototype platform provides a real-time access to the composition, organization and simulation of planktonic communities. First, our results demonstrate such a system detecting a target dinoflagellate; second, we apply structural and functional indexes to compare and characterize the ecological networks from two different coastal areas. Conclusions are made about SiMoCo’s feasibility and its possible contribution to the decision-making process within integrated coastal zone management (ICZM) strategies.     

Effect of attitudes, habit and affective appraisal on mode choice: an application to university workers

Traditionally, car use and modal choice, in general, have been studied under the random utility framework, assuming that individuals choose a particular mode based on their own socio-economic characteristics and the attributes describing the available options. This approach has originated useful models which have been able to explain modal split. However, at the same time, it has received critics because of its poor characterization of human behaviour and the weakness of its assumptions. Research has suggested that socio-psychological factors could help to understand better the choice process. In this paper, attitudinal theory and its link to human behaviour were used to select attitudes, habit and affective appraisals as explanatory variables. They were measured using ad-hoc instruments, which were combined with a revealed preference questionnaire, in order to obtain information about the traveller and the chosen mode. This instrument was applied to a sample extracted from staff members of the University of Concepcion, Chile. Analyses of attitudinal variables showed that car use habit was positively correlated to attitude and positive emotions towards car, implying that breaking the vicious circle of car use through persuasive techniques might be difficult. Estimation of discrete choice models showed that attitudinal variables presented a significant contribution to modal utility, and helped to improve both fitness and statistical significance. Results showed that choice can be influenced by factors related to attitudes and affective appraisal, and that their study is necessary in order to achieve an effective car use reduction.

Curbing automobile use for sustainable transportation: analysis of mode choice on short home-based trips

This paper analyzes transportation mode choice for short home-based trips using a 1999 activity survey from the Puget Sound region of Washington State, U.S.A. Short trips are defined as those within the 95th percentile walking distance in the data, here 1.40 miles (2.25 km). The mean walking distance was 0.4 miles (0.6 km). The mode distribution was automobile (75%), walk (23%), bicycle (1%), and bus (1%). Walk and bicycle are found less likely as the individual’s age increases. People are more likely to drive if they can or are accustomed to. People in multi-person families are less likely to walk or use bus, especially families with children. An environment that attracts people’s interest and provides activity opportunities encourages people to walk on short trips. Influencing people’s choice of transport mode on short trips should be an important part of efforts encouraging the use of non-automobile alternatives.

Measurement of hydrocarbon and carbon monoxide emissions during the starting of automotive DI Diesel engines

Most of hydrocarbon (HC) and carbon monoxide (CO) emissions from automotive DI Diesel engines are produced during the engine warm-up period and are primarily caused by difficulties in obtaining stable and efficient combustion under these conditions. Furthermore, the contribution of engine starting to these emissions is not negligible; since this operating condition is highly unfavorable for the combustion progress. Additionally, the catalytic converter is ineffective due to the low engine temperature. In conjunction with adequate engine settings (fuel injection and fresh air control), either the glow plugs or the intake air heater are activated during a portion of the engine warm-up period, so that a nominal engine temperatures is reached faster, and the impact of these difficulties is minimized. Measurement of gaseous pollutants during engine warm-up is currently possible with detectors used in standard exhaust gas analyzers (EGA), which have response times well-suited for sampling at such transient conditions. However, these devices are not suitable for the measurement of exhaust emissions produced during extremely short time intervals, such as engine starting. Herein, we present a methodology for the measurement of the cumulative pollutant emissions during the starting phase of passenger car DI Diesel engines, with the goal of overcoming this limitation by taking advantage of standard detectors. In the proposed method, a warm canister is filled with an exhaust gas sample at constant volumetric flow, during a time period that depends on the engine starting time; the gas concentration in the canister is later evaluated with a standard EGA. When compared with direct pollutant measurements performed with a state-of-art EGA, the proposed procedure was found to be more sensitive to combustion changes and provided more reliable data.     

Influence of shock absorber wearing on vehicle brake performance

In order to safely maintain a vehicle, it is necessary to verify the most important systems that affect safety during Periodic Motor Vehicle Inspections (PMVIs). In a previous paper, a test method and validation criteria were suggested by the authors to verify shock absorber status during PMVIs, as they are a fundamental component that may wear out during a vehicle’s life. In this paper, variations of the performance of the vehicle’s brakes resulting from shock absorber wearing have been analyzed, in order to confirm whether the suggested criteria is valid for taking into account longitudinal forces and pitch movement on the vehicle. A simulation-based study was conducted with several configurations of a worn damper on a vehicle driving on two virtual roads: smooth and undulating. The results confirmed that the damping coefficient established as an acceptable value to verify the shock absorber status in PMVIs is also valid considering the forces involved in a braking maneuver.     

Bayesian kriging regression for the accuracy improvement of beam modeled T-junctions of buses and coaches structures with a methodology based on FEM behavioral analysis

This paper has been developed in the framework of the alternative beam T-junction solution previously propoused by the authors (Alcalá et al., 2013), with the scope of optimizing the behavior of buses and coaches upper structures modeled with beam type elements. The alternative beam T-junction model proposed by the authors, had a total of six elastic elements at the junction level allowing to modify the localized rigidity of any modeled T-junctions, therefore improving their behavior and avoiding the well known rigidity issue these elements have. A fundamental aspect behind the use of these alternative beam models is related to the necessity of correctly estimating the rigidity values of the elastic elements for each modeled T-junction. In this context, we propose applying a surrogate model for the reference calculations which is based on statistical Bayesian kriging predictors. Statistical predictions have the added value, with respect to deterministic solutions, of providing a quantification of uncertainty. The development of the kriging predictors has required the application of a statistical methodology including computer experiment design, computation of moments of inertia, graphical and ANOVA type sensitivity analysis and Monte Carlo computation of Bayesian inference. The results of the application have been a very satisfactory trade-off between accuracy of approximation (prediction) and computational cost. The surrogate kriging models also provide an useful tool for a better understanding of the input-output relationships involved in the reference computations.     

Novel evaluation method of fuel consumption and emission for heavy-duty hybrid electric vehicles

This paper is a continuation of a previous paper titled “A novel way to calculate energy efficiency for rechargeable batteries” published on Journal of Power Sources/2012 describing a new method to calculate energy efficiency for rechargeable batteries. The present paper further describes the application of energy efficiency model on the evaluation of fuel consumption and emission for the heavy-duty hybrid electric vehicles (HD-HEVs). A more accurate calculation method of net energy change for power battery pack is proposed based on energy efficiency model of power battery pack. A more simplified and accurate correction method of fuel consumption and emission is also presented based on equivalent mileage. The fuel consumption and emission on chassis dynamometer are measured in the HD-HEVs. The experiment results show that relative errors of fuel consumption and emission between equivalent mileage correction results and linear regression correction results are less than 3%, which verifies accuracy and validates the proposed evaluation method for HD-HEVs fuel consumption and emission.