Air conflict frequency calculations

A calculation due to Schmidt is discussed.     

A New Technique of High-performance and Fast Tensioning Prestressed Anchorage CableEI北大核心

Research purposes: The large-span transition section tunnel of the Badaling Great Wall station on the Beijing-Zhangjiakou high-speed railway with the maximum excavation width of 32.7 m, and the largest excavation area of 494.4 m 2 , is the world's biggest traffic tunnel in the world with the largest excavation width and excavation area, which has difficult construction and high security risks. The initial support system of tunnel is mainly realized by prestressed bolt, prestressed cable and shotcrete. After test, anchor cable tension using the traditional anchor cable construction technology can't meet the design requirements, at the same time, it takes about 30 days to achieve prestressed tensioning. Therefore, we need to study the high-performance fast tensioning prestressed anchor cable technology, to effectively control surrounding rock deformation, to ensure the safety of construction, improve construction efficiency. Research conclusions:(1) The traditional anchor cable construction technology is adopted. The anchor cable tension value is mainly controlled by the grip force between the anchor rope and grouting body and the cohesive force between grouting body and surrounding rock. (2) The grip force between the anchor rope and the grouting body can be increased by about 2 times by increasing the "barb"; The cohesive force between the grouting body and the surrounding rock can be increased by 1.5 times by 6 ~ 7 MPa high-pressure grouting process. (3) The modified sulphoaluminate cement slurry can reach more than 30 MPa within 1 day of the slurry strength, so as to realize fast anchor cable tension within 1 day after grouting completion. (4)The research results can be used for reference in similar prestressed anchorage cable construction projects. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

Influence of repeated and delayed excitations in combined subspace identification

The application of combined subspace identification methods to land vehicles would allow the modal parameters of the vehicle to be obtained, while it is in operation, thus improving the vehicle modal characterisation. However, when a land vehicle is circulating through a straight line, the excitations applied to the different axles are identical among them but with a certain time delay. The presence of repeated excitations with different time delays implies that the past and future subspaces include common vectors that may lead to problems in the application of the method. To analyse its influence, an index called the reduction coefficient resulting from excitations (RCE) has been defined. RCE evaluates the amount of information eliminated in the oblique projection due to the effect of repeated excitations. The use of RCE enables the selection of analysis parameters, particularly the sampling frequency, the signals grouping and some specific parameters of the subspace identification methods.     

Performance decay of stern bearing based on lubrication numerical model and state parameters北大核心CSCD

[目的]为了实现对船舶艉轴承润滑状态的监测和评估,提出一种结合润滑性能衰变模型和支持向量机(SVM)算法的艉轴承润滑性能评估方法。[方法]针对船舶艉轴承润滑状态难以监测和识别的问题,建立轴承润滑衰变数值模型,并运用实验数据对该模型进行验证,研究载荷、粗糙度和半径间隙对润滑状态衰变机理的影响。基于SVM算法,构建润滑状态分类器,通过网格搜索算法优化超参数,利用不同润滑状态的数据集进行训练,最后实现对艉轴承润滑状态的评估。[结果]结果显示,随着外部载荷、粗糙度和半径间隙的增大,轴承润滑状态恶化的临界速度增大,动压润滑工作范围减小,混合润滑工作范围增大;由仿真数据集对润滑状态识别模型的验证表明,所提的润滑状态识别方法准确率达96.88%。[结论]所提方法能监测轴承的润滑性能特征,有效识别轴承的润滑状态。     

上软下硬地层大直径土压平衡盾构下穿民房建筑群沉降控制北大核心CSCD

依托广州地铁18号线盾构施工,针对其地层分布复杂、软硬差异大及穿越密集民房建筑群等特点,通过注浆加固、现场动态监测、优化掘进参数等一系列主动措施,解决实际工程中掘进参数合理取值与地表建筑沉降变形控制两大难题。研究结果表明:(1)在该类软硬地层中掘进时,刀盘在通过不同岩层断面分界线时扭矩、推力等参数波动较大,总推力与扭矩有良好的相关性,各掘进参数宜控制为:推力30000~35000 kN、扭矩4500~6000 kN·m、推进速度35~45 mm/min;(2)提出的多段式封孔洞内超前注浆工艺可使刀盘前18 m范围内的地表上抬3~5 mm,最大上抬值能达9.02 mm,同时能缓解土体在盾构下穿时及后续固结稳定的沉降趋势;(3)因刀具磨损、掘进参数波动大、螺旋机卡死等引起的临时停机会造成地表建筑日沉降速率超过3 mm/d,在预设停机点位置前采取洞内超前注浆和克泥效工法能有效缓解沉降趋势,在带压开舱期间日沉降速率控制在2 mm/d以下;(4)左右隧道轴线附近的地表建筑沉降基本可分为“微小隆起—沉降较大—逐渐稳定”三个阶段,测点最大沉降值最终稳定在-21.38 mm、-22.49 mm,均小于控制值。     

Fault diagnosis of steam power system based on convolutional neural network北大核心CSCD

[Objectives]In order to improve the fault diagnosis level of marine power systems, this paper studies the real-time fault diagnosis of a marine supercharged boiler based on a convolutional neural network (CNN).[Methods]First, the simulation program of the marine supercharged boiler is developed based on the GSE platform, and the simulation fault data is obtained. The fault diagnosis model of the boiler is then established using the CNN method. Next, through the change trends of temperature, flow and other parameters, combined with a priori knowledge and the machine learning method, fault identification is carried out. Lastly, the performance of the method is evaluated against criteria such as confusion matrix and accuracy. [Results]According to the comparison results between the feature extracted dataset and the original dataset, the stability of the model output results and the generalization ability of the model are optimized and improved, with an overall fault classification accuracy reaching 99.53%.[Conclusion]The results of this study can provide valuable references for the intelligent monitoring of marine power systems. © 2022 Chinese Medical Journals Publishing House Co.Ltd. All rights reserved.     

A dynamic approach to road freight flows modeling in Spain

This paper presents an innovative approach to analyzing road vehicle freight traffic that uses a dynamic panel data specification derived from a gravity model. This dynamic approach, which has recently been employed in international goods trade models in lieu of the traditional static specification, is applied to the case of Spain using data for the countrys 15 NUTS-3 regions between 1999 and 2009. Using the system general method of moments approach, we obtained significant evidence that the flow of vehicles carrying commodities by road has a strong persistence effect when controlling for unobserved heterogeneity. We also found that the quality of road transport infrastructure has a significant impact on vehicle trips. According to our findings, we suggest that this type of specification be employed in distribution models in which fixed effects and lags of the dependent variable are included to account for unobserved heterogeneity and persistence effects, respectively.     

Inclusion of latent variables in Mixed Logit models: Modelling and forecasting

Travel demand models typically use mainly objective modal attributes as explanatory variables. Nevertheless, it has been well known for many years that attitudes and perceptions also influence users’ behaviour. The use of hybrid discrete choice models constitutes a good alternative to incorporate the effect of subjective factors. We estimated hybrid models in a short-survey panel context for data among many alternatives. The paper analyses the results of applying these models to a real urban case study, and also proposes an approach to forecasting using these models. Our results show that hybrid models are clearly superior to even highly flexible traditional models that ignore the effect of subjective attitudes and perceptions.     

Home-work carpooling for social mixing

Transportation - Shared mobility is widely recognized for its contribution in reducing carbon footprint, traffic congestion, parking needs and transportation-related costs in urban and suburban...     

Positive impact of distribution centres on the environment

The transport sector in general, and trucks in particular, generates a significant amount of emissions in Australia. It appears the trend will escalate unless different measures are taken to reduce the reliance of freight transport on trucks. This paper discusses the benefits of distribution centres as a means to reduce road congestion, increase safety, protect the environment by reducing atmospheric pollution and improve freight distribution. It also provides the effective use of the existing rail network and its infrastructure and improves the lead-time as well as lowering the cost of transportation of cargo. It also investigates the positive impact of distribution centres located near to manufacturing and farming production units. A simulation model has been developed and used to help determine the amount of atmospheric pollution produced by two modes of land transport, rail and road, for the movement of containers between port and destination. Results derived from the model provide evidence about a preferred land-transport regime. The paper has two sections: (1) the role of distribution centres in the chain of transport and (2) the impact of distribution centres on the environment. The first section investigates the feasibility of the implementation of distribution centres in the State of Victoria with respect to rail line capacity and location allocation. The second section presents an additional simulation model that investigates the role of a distribution centre in relation to the amount of atmospheric pollution produced by rail and road, while containers are carried between port and destination.