Gain and noise figure analysis of Er<Superscript>3+</Superscript>-doped YAG transparent ceramic microchip amplifier

The rate equations and the power evolution equations based on excited state absorption (ESA) and cooperative upconversion (CUC) of high concentration erbium-doped yttrium aluminum garnet (YAG) transparent ceramic waveguide amplifier are set up to analyze the effects of the pump power, active ion concentration and waveguide length on the amplifier gain and noise figure (NF). The numerical analysis predicts that with a pump power of 100mW, an active ion concentration of 1.0×10²⁶ ion/m³ and a waveguide length of 3 cm, a small-signal gain of 30 dB and an NF of 5 dB can be achieved in the micro-chip amplifier.     

Research on probability distribution of port cargo throughput

In order to more accurately examine developing trends in gross cargo throughput, we have modeled the probability distribution of cargo throughput. Gross cargo throughput is determined by the time spent by cargo ships in the port and the operating efficiency of handling equipment. Gross cargo throughput is the sum of all compound variables determining each aspect of cargo throughput for every cargo ship arriving at the port. Probability distribution was determined using the Wald equation. The results show that the variability of gross cargo throughput primarily depends on the different times required by different cargo ships arriving at the port. This model overcomes the shortcoming of previous models： inability to accurately determine the probability of a specific value of future gross cargo throughput. Our proposed model of cargo throughput depends on the relationship between time required by a cargo ship arriving at the port and the operational capacity of handling equipment at the port. At the same time, key factors affecting gross cargo throughput are analyzed. In order to test the efficiency of the model, the cargo volume of a port in Shandong Province was used as an example. In the case study the actual results matched our theoretical analysis.     

Design optimization of a torpedo shell structure

An optimized methodology to design a more robust torpedo shell is proposed. The method has taken into account reliability requirements and controllable and uncontrollable factors such as geometry, load, material properties, manufacturing processes, installation, etc. as well as human and environmental factors. The result is a more realistic shell design. Our reliability optimization design model was developed based on sensitivity analysis. Details of the design model are given in this paper. An example of a torpedo shell design based on this model is given and demonstrates that the method produces designs that are more effective and reliable than traditional torpedo shell designs. This method can be used for other torpedo system designs.     

An investigation of the performance of an electronic in-line pump system for diesel engines

WIT Electronic Fuel System Co., Ltd. has developed a new fuel injector, the Electronic In-line Pump （EIP） system, designed to meet China＇s diesel engine emission and fuel economy regulations. It can be used on marine diesel engines and commercial vehicle engines through different EIP systems. A numerical model of the EIP system was built in the AMESim environment for the purpose of creating a design tool for engine application and system optimization. The model was used to predict key injection characteristics under different operating conditions, such as injection pressure, injection rate, and injection duration. To validate these predictions, experimental tests were conducted under the conditions that were modeled. The results were quite encouraging and in agreement with model predictions. Additional experiments were conducted to study the injection characteristics of the EIP system. These results show that injection pressure and injection quantity are insensitive to injection timing variations, this is due to the design of the constant velocity cam profile. Finally, injection quantity and pressure vs. pulse width at different cam speeds are presented, an important injection characteristic for EIP system calibration.     

Vulnerability of Coastal Resort Cities to Mean Sea Level Rise in the Mexican Caribbean

We evaluated the potential economic impacts of increasing sea level rise (SLR) along the Mexican Caribbean where there are major gaps in our understanding of the mechanisms controlling flooding duration and frequency associated to future ecological and economic impacts. We determined the negative economic impact of SLR on infrastructure in the largest urban centers (Cancun, Isla Mujeres, Playa del Carmen, Puerto Morelos and Cozumel) in the state of Quintana Roo (Mexico) that are considered the largest tourism “hot spots” (resort cities) in the country. The tourism industry in this coastal area injects >8 billion dollars year^?1 to the Mexican economy. Our conservative economic assessment regarding the impact of SLR, under a 1?m scenario for all coastal cities is $330 million USD. Further projections for worst scenarios (SLR >2 m) show a non-linear trend where the cost of inaction can reach up to $1.4 billion USD (2?m SLR scenario) and $2.3 billion USD (3?m SLR scenario). This potential loss of infrastructure, as construction cost, is staggering and represents a robust baseline to start evaluating with more detail future impacts of climate variability and change on the Mexican Caribbean coastline.     

Simulation of turbulent effective wakes for propellers in off-design conditions by a correction factor approach

Journal of Marine Science and Technology - This paper presents a procedure for the estimation of propeller effective wakes in oblique flows. It shows how a recently developed method for controlling...     

Existence,relatedness and growth needs as mediators between mode choice and travel satisfaction: evidence from Denmark

Transportation - Understanding the link between mode choice and travel satisfaction is essential for promoting sustainable travel by expanding utility theory to include also the eudaimonic value of...     

Study on J-integral with SENB specimensin a condenser material

A series of tests was performed with three-point single-edge-notched-bend (SENB) specimens in a condenser material (Titanium alloy). Results show that the J-integral values of welded joint and HAZ are obviously smaller than those of the base metal. It signifies that the welding process can result in a reduced toughness of Titanium alloy and the effect of crack orientation on toughness value is not negligible for engineering applications. Besides, the J-integral values of L-T direction specimens are much higher than those of LS ones. The J-integral values of rolled ring are: J_(C-R)>J_(C-L)>J_(L-R).     

Law enforcement in the ocean

The combating of the present great variety of criminal activities occurring at sea mainly involves measures to be taken on land, in particular in ports.However, also actual enforcement at sea will continue to play an essential (complementary) role. This article surveys the rules of international law governing law enforcement measures at sea. These rules are complex, because distinctions have to be made between the various jurisdictional zones at sea and between the positions of the flag state, the coastal state and the port state. Traditionally, ships in the high seas (all sea areas beyond a narrow band of territorial sea) were under the exclusive jurisdiction of the flag state. In an increasing number of situations, the coastal state now has law enforcement authority over foreign ships in expanded areas up to 200 nautical miles offshore. But apart from these situations, flag state jurisdiction still prevails beyond the territorial sea. This makes effective law enforcement difficult. In practice, many obstacles can be overcome by making more effective use of the authority of the port state, and by concluding new international agreements providing for specific enforcement systems.