Numerical simulation of multi-pass rolling force and temperature field of plate steel during hot rolling

Rolling force and temperature field are important parameters in the hot rolling process of plate steel. Most researchers use ANSYS/LS-DYNA and MSC.Marc to simulate the hot rolling process, however, software DEFORM-3D is not used widely in this field. Therefore, in this study, the commercially available finite element analysis software DEFORM-3D is used to simulate the distribution of rolling force, stress-effective, strain-effective and temperature field during the hot rolling process of plate steel with the size of 0.220m×2.070m×1.904m. Both the simulated rolling force and temperature of the multi-pass are compared with the measured results. It is shown that the simulated values by the finite element method are approximate to the measured values in the hot rolling of plate steel. So the simulation can provide an important reference and optimization to make rolling process and parameters in steel factory.     

Numerical simulation of fluid flow caused by buoyancy forces during vacuum arc remelting process

The metallurgical structure and composition of ingots which depend critically on the fluid motion within the molten pool during the vacuum arc remelting (VAR) process have important effect on the subsequent mechanical processes like forging, rolling and welding. In order to determine the fluid motion of molten pool, a 2D finite element model is established using ANSYS10.0 software, combined with the turbulent fluid flow and heat transfer. The fluid motion caused by thermo buoyancy forces is investigated at different VAR processes in the present study. The results indicate that the fluid flows symmetrically along the axis of the molten pool and clockwisely along the circle at the right pool’s profile. It is also shown that the maximum velocity increases with increasing melting rate and a direct proportional relationship exists.     

Improved preimage attack on 3-pass HAVAL

HAVAL is a hash function proposed by Zheng et al. in 1992, including 3-, 4- and 5-pass versions. We improve pseudo-preimage and preimage attacks on 3-pass HAVAL at the complexity of 2¹⁷² and 2^209.6, respectively, as compared to the previous best known results: 2¹⁹² and 2²²⁵ by Sasaki et al. in 2008. We extend the skip interval for partial-patching and apply the initial structure technique to find the better message chunks, and combine the indirect-partial-matching, partial-fixing and multi-neutral-word partial-fixing techniques to improve the attacks based on the meet-in-the-middle method. These are the best pseudo-preimage and preimage attacks on 3-pass HAVAL.     

Fault detection of networked control systems with uncertain time-varying delay and quantization error

Problems related to fault detection of networked control systems (NCSs) with both uncertain timevarying delay and quantization error are studied in this paper. A novel model with the form of polytopic uncertainty is given to represent the influences of both the time-varying delay and the quantization error, and then the reference model based method is used to design the residual generator that is robust to both unknown network-induced delay and unknown inputs. A numerical example is also given to illustrate the merits of the presented method. The proposed method can be regarded as an extension of the authors’ former work, which can only deal with time-varying delay.     

Chosen ciphertext secure identity-based broadcast encryption in the standard model

To give concurrent consideration both the efficiency and the security (intensity of intractable problem) in the standard model, a chosen ciphertext secure identity-based broadcast encryption is proposed. Against the chosen ciphertext security model, by using identity (ID) sequence and adding additional information in ciphertext, the self-adaptive chosen identity security (the full security) and the chosen ciphertext security are gained simultaneously. The reduction of scheme’s security is the decisional bilinear Diffie-Hellman (BDH) intractable assumption, and the proof of security shows that the proposed scheme is indistinguishable against adaptive chosen ciphertext attacks in the standard model under the decisional BDH intractable assumption. So the security level is improved, and it is suitable for higher security environment.     

Aero-optical characteristics of supersonic flow over blunt wedge with cavity window

The optical rays that form the image of an object and propagate a supersonic flow over a vehicle are refracted by the density variations. A numerical analysis of the aero-optical characteristics of supersonic flow over blunt wedge with a cavity window is carried out. A hybrid method of Reynold averaged Navier-Stokes and direct simulation Monte Carlo (RANS/DSMC) is employed to simulate the flowfield. Refraction factor is introduced to evaluate the flowfield’s aero-optical characteristic. The results show that mean flow’s aero-optical effects are mainly caused by the shock wave, the expansion wave and the turbulent boundary layer. Fluctuation flow’s aero-optical effects are mainly caused by the turbulent boundary layer and the shock wave induced by the cavity window. The aero-optical effects at the leading side of window are caused by the mean density variations, while the effects at the trailing side are caused by the density fluctuations. Different draft angles of the cavity window are investigated. The airborne optical devices of supersonic vehicle should be mounted in the middle of the cavity window with a large draft angle.     

A medium-resolution wave hindcast study over the Central and Western Mediterranean Sea

The present study is aimed at determining the confidence limits of design wave parameters derived from numerical modeling—for both extremes and operational conditions—over the Central and Western Mediterranean Sea. The paper presents the methodology and results of an extensive validation activity conducted on a chain of medium-resolution third-generation wave models used for hindcast purposes. The stringent requirements of state-of-the-art coastal and offshore engineering applications over this area make the adoption of medium- or high-resolution hindcast wave and wind models almost mandatory because of the complex coastal geometry, bathymetry, and orography that in turn lead to large variations of the design wave parameters even within small regions. The chains of nested meteorological and wave models used in this hindcast study belong to the ETA and WaveWatch III families, respectively. In this study the wind and wave numerical models have been run over the past 20 years, with increasing resolutions of the wave models from 0.2° up to 0.04°. The results presented herein have 0.1° resolution for both wind and wave models. The wave data obtained are compared with available measurements from 14 wave buoys in coastal zones in the Central and Western Mediterranean Sea.     

On the vibrational characteristics of a two-tier scaled container stack

It is estimated that around 10,000 containers are lost during maritime transportation every year, representing an economic loss to the liner industry. Regulations and norms used to calculate values to secure them to the ship’s deck account for static loads only, neglecting more realistic conditions. This paper describes an approach to simulate a two-tier scaled model of a 20-ft ISO freight container and its linking connectors, denominated twist locks, subject to a dynamical load induced by its base. To analyze this problem two methods were employed: a shaking table test and finite-element analysis. Results of this study indicate that the numerical model built to simulate two-tier container stack dynamics is a promising tool for further studies. Moreover, the model is able to predict conditions close to real situations faced by container stacks while stored on deck.     

Study on a procedure for propulsive performance prediction for CRP-POD systems

The experimental procedure to predict the full-scale performance of the CRP-POD propulsion system is studied. In the CRP-POD system, the RPM ratio of the two propellers is not mechanically fixed, in contrast with conventional CRP systems. Therefore the existing procedure for conventional CRP systems is not appropriate for evaluating the performance of each propeller. In this paper, the characteristics of the CRP-POD system, designed for a 9,600 TEU class container carrier, are studied experimentally. Based on this study, a procedure for propulsive performance prediction for CRP-POD propulsion ships is suggested.     

Verification and validation study of URANS simulations for an axial waterjet propelled large high-speed ship

The accurate prediction of waterjet propulsion using computational fluid dynamics (CFD) is of interest for performance analyses of existing waterjet designs as well as for improvement and design optimization of new waterjet propulsion systems for high-speed marine vehicles. The present work is performed for three main purposes: (1) to investigate the capability of a URANS flow solver, CFDSHIP-IOWA, for the accurate simulation of waterjet propelled ships, including waterjet–hull interactions; (2) to carry out detailed verification and validation (V&V) analysis; and (3) to identify optimization opportunities for intake duct shape design. A concentrated effort is applied to V&V work and performance analysis of waterjet propelled simulations which form the focus of this paper. The joint high speed sealift design (JHSS), which is a design concept for very large high-speed ships operating at transit speeds of at least 36 knots using four axial flow waterjets, is selected as the initial geometry for the current work and subsequent optimization study. For self-propelled simulations, the ship accelerates until the resistance equals the prescribed thrust and added tow force, and converges to the self propulsion point (SPP). Quantitative V&V studies are performed on both barehull and waterjet appended designs, with corresponding experimental fluid dynamics (EFD) data from 1/34 scale model testing. Uncertainty assessments are performed on iterative convergence and grid size. As a result, the total resistance coefficient for the barehull case and SPP for the waterjet propelled case are validated at the average uncertainty intervals of 7.0 and 1.1%D, respectively. Predictions of CFD computations capture the general trend of resistance over the speed range of 18–42 knots, and show reasonable agreement with EFD with average errors of 1.8 and 8.0%D for the barehull and waterjet cases, respectively. Furthermore, results show that URANS is able to accurately predict the major propulsion related features such as volume flow rate, inlet wake fraction, and net jet thrust with an accuracy of ~9%D. The flow feature details inside the duct and interference of the exit jets are qualitatively well-predicted as well. It is found that there are significant losses in inlet efficiency over the speed range; hence, one objective for subsequent optimization studies could be maximizing the inlet efficiency. Overall, the V&V work indicates that the present approach is an efficient tool for predicting the performance of waterjet propelled JHSS ships and paves the way for future optimization work. The main objective of the optimization will be reduction of powering requirements by increasing the inlet efficiency through modification of intake duct shape.