喷水推进船平移机动操纵方法研究

为了实现喷水推进艇平移机动操纵,对其操纵方法进行了研究.首先采用船模斜拖试验获取平移操纵时船体水动力特性变化规律,然后求解喷水推进器在各种航速、转速、倒车斗位置以及喷口转向角条件下的推力.在此基础上,综合分析船体平移运动水动力特性和喷水推进器推力特性,提出了用双手柄同步等角度调节的平移操纵法,并制定了详细的平移操纵步骤...     

Experimental and numerical investigation of fuel mixing effects on soot structures in counterflow diffusion flames

Experimental and numerical analyses of laminar diffusion flames were performed to identify the effect of fuel mixing on soot formation in a counterflow burner. In this experiment, the volume fraction, number density, and particle size of soot were investigated using light extinction/scattering systems. The experimental results showed that the synergistic effect of an ethylene-propane flame is appreciable. Numerical simulations showed that the benzene (C₆H₆) concentration in mixture flames was higher than in ethylene-base flames because of the increase in the concentration of propargyl radicals. Methyl radicals were found to play an important role in the formation of propargyl, and the recombination of propargyl with benzene was found to lead to an increase in the number density for cases exhibiting synergistic effects. These results imply that methyl radicals play an important role in soot formation, particularly with regard to the number density.     

Dynamic correction of the steering-characteristic curve and application to an EPS control system

The steering torque of an electric-power steering (EPS) motor is interrelated with the performance of the EPS control system, therefore calculating an exact steering torque is critical in this application. This study presents a dynamic correction method that greatly decreases the calculated error in the steering torque; the PID controller demonstrated here is therefore suitable for the demands of this system. Based on an analysis of the detection process of the steering torque sensor, we first deduced that the variation of the system resistance torque equals the difference between the measured value of the steering torque and the ideal one in the previous cycle. Based on this result, we then proposed a dynamic correction method. Finally, a comparison of the simulated and experimental results for several vehicles evidenced the effectiveness of this dynamic correction method.     

Advanced hybrid energy storage system for mild hybrid electric vehicles

Hybrid electric vehicles (HEV) utilize electric power and a mechanical engine for propulsion; therefore, the performance of HEVs is directly influenced by the characteristics of the energy storage system (ESS). The ESS for an HEV generally requires high power performance, long cycle life, reliability and cost effectiveness; thus, a hybrid energy storage system (HESS) that combines different types of storage devices has been considered to fulfill both performance and cost requirements. To improve the operating efficiency and cycle life of a HESS, an advanced dynamic control regime in which pertinent storage devices in the HESS can be selectively operated based on their status is presented. Verification tests were performed to confirm the degree of improvement in energy efficiency. In this paper, an advanced HESS with a battery management system (BMS) that includes an optimal switching control function based on the estimated state of charge (SOC) is presented and verified.     

On-road assessment of in-vehicle driving workload for older drivers: Design guidelines for intelligent vehicles

There has been recent interest in intelligent vehicle technologies, such as advanced driver assistance systems (ADASs) or in-vehicle information systems (IVISs), that offer a significant enhancement of safety and convenience to drivers and passengers. However, the use of ADAS- and IVIS-based information devices may increase driver distraction and workload, which in turn can increase the chance of traffic accidents. The number of traffic accidents involving older drivers that are due to distraction, misjudgment, and delayed detection of danger, all of which are related to the drivers’ declining physical and cognitive capabilities, has increased. Because the death rate in traffic accidents is higher when older drivers are involved, finding ways to reduce the distraction and workload of older drivers is important. This paper generalizes driver information device operations and assesses the workload while driving by means of experiments involving 40 drivers in real cars under actual road conditions. Five driving tasks (manual only, manual primarily, visual only, visual primarily, and visual-manual) and three age groups (younger (20–29 years of age), middle-aged (40–49 years of age), and older (60–69 years of age)) were considered in investigating the effect of age-related workload difference. Data were collected from 40 drivers who drove in a real car under actual road conditions. The experimental results showed that age influences driver workload while performing in-vehicle tasks.     

Automobile defrosting system analysis through a full-scale model

Adequate visibility through the automobile windshield is of paramount practical significance, most often at very low temperatures when ice tends to form on the windshield screen. But the numerical simulation of the defrost process is a challenging task because phase change is involved. In this study numerical solution was computed by a finite volume computational fluid dynamics (CFD) program and experimental investigations were performed to validate the numerical results. It was found that the airflow produced by the defrost nozzle is highly nonuniform in nature and does not cover the whole windshield area. The nonuniformity also severely affected the heating temperature pattern on the windshield. The windshield temperature reached a maximum in the vicinity of the defroster nozzle in the lower part of the windshield and ranged from 9∼31°C over a period of 30 min, which caused the frost to melt on the windshield. The melting time was under 10 minutes, which satisfied the NHTSA standard. The numerical predictions were in close agreement with the experimental results. Thus, CFD can be a very useful design tool for an automobile HVAC system.     

Development of a semi-empirical program for predicting the braking performance of a passenger vehicle

Since the invention of automobiles, the need to know the braking performance of vehicles has been acknowledged. However, because there are numerous design variables as well as nonlinearities in the braking system, it is difficult to predict the performance accurately. In this paper, a computational program is developed to estimate the braking performance numerically. This synthetic braking performance program accounts for pedal force, pedal travel and deceleration of braking parts, such as master cylinder, booster, valve, brake pad, rotor, and hoses. To improve the accuracy of program, a semi-empirical model of a braking system is introduced by using the empirical test data of pad compression, hose expansion and the friction coefficient between the pad and rotor. The accuracy of the estimation is evaluated by comparing it to the actual vehicle test results. The developed program is easy for the brake system engineers to manipulate and it can be used in the development of new vehicles by incorporating the graphical presentations.     

Effect of punch angle on energy absorbing characteristics of tube-type crash elements

As a crash energy absorber, a tube-type crash element (expansion tube) dissipates kinetic energy through the internal deformation energy of the tube and through frictional energy. In this paper, the effects of the variation of punch angles on the energy-absorbing characteristics of expansion tubes were studied by quasi-static tests using three punch angles (15°, 30°, and 45°). A finite element analysis of the tube expanding process (m = τ _max /K) was performed using a shear friction model to confirm the variation of the shear friction factor with respect to punch angles using the inverse method. Additional analyses were performed using angles of 20°, 25°, 35°, and 40° to study the effect of the punch angles on the internal deformation energy, frictional energy, and expansion ratio of the tubes. The results of the experiment and finite element analysis showed that the shear friction factor was inversely proportional to the punch angles, and a specific punch angle existed at which the absorbed energy and expansion ratio remained constant.     

Sideslip angle estimation considering short-duration longitudinal velocity variation

The accurate estimation of sideslip angle is necessary for many vehicle control systems. The detection of sliding and skidding is especially critical in emergency situations. In this paper, a sideslip angle estimation method is proposed that considers severe longitudinal velocity variation over the short period of time during which a vehicle may lose stability due to sliding or spinning. An extended Kalman filter (EKF) based on a kinematic model of a vehicle is used without initialization of the inertial measurement unit to estimate vehicle longitudinal velocity. A dynamic compensation method that compensates for the difference in the locations of the vehicle velocity sensor and the IMU in on-road vehicle tests is proposed. Evaluations with a CarSim™ 27-degree-of-freedom (DOF) model for various vehicle test scenarios and with on-road tests using a real vehicle show that the proposed sideslip angle estimation method can accurately predict sideslip angle, even when vehicle longitudinal velocity changes significantly.     

Virtual product development for an automotive universal joint

Constant velocity universal joints play a very important role in automotive drivelines. The traditional development method, based on a physical prototype and experimenting, is time consuming and costly. This test-based method does not easily identify rational design clues. Therefore, a virtual product development method, which is based on dynamics modeling and simulation, is necessary. Virtual prototyping for a universal joint has been developed using the simulation software package MSC.ADAMS. Dynamics simulation has been performed to predict and evaluate joint behaviors. This virtual product development method has been implemented by the WanXiang Group Co., which is one of the most famous Chinese automotive component manufacturers.