Model-based optimization of parameters for a diesel engine SCR system

A Selective Catalytic Reduction (SCR) system simulation model for diesel engines was established based on MATLAB/Simulink. The model includes four subsystems: signal acquisition, DEF (Diesel Exhaust Fluid) dosing control, catalytic chemistry reaction and NO_X emissions reduction. The SCR control strategy was optimized based on ETC simulation results. Simulation and test results indicate that the model developed in this paper can predict ETC NO_X emissions accurately.     

Daily newspaper distribution planning with integer programming: an application in Turkey

Abstract

This paper concerns the newspaper distribution problem. It addresses the transportation of newspapers from printing plant to newsagents with distribution vehicles under various particular constraints. The objective is to minimize the distance traveled by the vehicles and/or the number of vehicles. In this study, the routes for vehicles of a leading newspaper distributor company in the Turkish press sector are examined. The problem is defined as determining optimal delivery routes for a fleet of homogeneous vehicles, starting and ending at the printing plant that is required to serve a number of geographically dispersed newsagents with known demands under capacity and time constraints, while minimizing the total distribution cost. An integar linear programming model is proposed as a solution using Cplex. Computational results demonstrate that the proposed model is fast and able to find optimal solutions for problem scenarios with up to 55 newsagents within reasonable computing times. It was found that the proposed model reduced the delivery cost by 21% on average when compared to the current manual method. The results show that this model is adequate for medium-sized distribution problems.     

Detection of captopril based on its enhanced resonance light scattering signals of fluorosurfactant-capped gold nanoparticles

In this study, based on its enhancement effect on resonance light scattering (RLS) of fluorosurfactant (FSN)-capped gold nanoparticles (GNPs), we reported a simple approach for the rapid sensing of captopril. Under optimum conditions, the lowest detectable concentration of captopril through this approach (S/N=3) was 0.01μg/mL. The calibration curve was linear over the range of 0.08-4.0μg/mL for the detection of captopril. The recoveries of captopril were found to fall in the range between 99% and 100%. We have validated the applicability of our method through the analyses of captopril in pharmaceutical formulations. Good agreements were obtained for the determination of captopril between the present approach and official method.     

PHP+MySQL环境下论坛的搭建

“PHP”论坛包括登录、注册和帖子归类等相关功能,以PHP MySQL来搭建个人论坛,整个安装过程均简单易懂。本文从PHP配置、MySQL安装、GD库安装和phpMyAdmin等五个方面介绍了安装设置过程,经过测试,该论坛达到预期目标并运行正常。     

Improvement of the volume-delay function by incorporating the impact of trucks on traffic flow

In current transportation modelling, travel time is the most important factor in decisions regarding transport modes, destinations and routes. The calculation of travel time is deployed by volume-delay functions (VDFs), a sub-model of route assignment procedure, using the correlation between increasing numbers of vehicles on a road and the road's restrictive capacity. By investigating existing VDFs, a clear gap is seen, demonstrating that current functions are not suited to reflect the empirically known large impact of trucks on passenger car travel times. This issue becomes crucial when transport models are used to reflect future scenarios where goods transportation is expected to increase greatly, and when transport models combine passenger and commercial traffic. This paper presents a new VDF which successfully includes trucks’ impact on traffic flow in the case of Germany and, with slight deviations, for North America. The function is developed using ideal-type data for German motorways. The differences between German and US data and their implications for VDFs are also discussed.     

A meta-analysis of DEA and SFA studies of the technical efficiency of seaports: A comparison of fixed and random-effects regression models

This paper presents a meta-analysis of variations in seaports’ Mean Technical Efficiency (MTE) scores based on 40 studies published in refereed academic journals. We link the variation in estimated MTE scores to differences in the following factors: the frontier methodology used, which essentially are the Data Envelopment Analysis (DEA) and the Stochastic Frontier Analysis (SFA); regions where seaports are situated; type of data used; number of observations; and the total number of variables used. Furthermore, we compare fixed-effects against a random-effects regression model where the latter assumes that the individual study specific characteristics matter while the former assumes that there is one general tendency across all studies. We present several findings based on the data: (1) the random-effects model outperforms the fixed effects model in explaining the variations in MTEs, (2) recently published studies have lower MTE scores as compared with earlier published studies, (3) studies that used nonparametric DEA models depict higher MTE scores as compared with those that used SFA models, (4) panel data studies have lower TE scores as compared with cross-sectional data, and (5) studies using European seaport data produce lower MTE scores when compared with the rest of the world. Finally, our results contradict some previous meta-analysis studies of TE scores. We encourage the use of random-effects models in meta-analysis studies because they account for individual study specific effects.     

船舶管理信息系统研发

经校企双方多年合作,采用先进船舶管理理念和标准化代码、运用国际先进的船岸通讯技术开发出的船舶管理信息系统完全符合国际、国内船舶管理行业的业务要求,该系统的研发成功对我国航运界实现船舶信息化和数字化管理起到了积极作用．     

Up‐to‐the‐minute information as we drive—how it can help road users and traffic management

Road transport of today has a substantial need for a better information system. The European research programmes PROMETHEUS and DRIVE offer the prospect of new techniques and strategies. The role of information in road transport is analysed from the viewpoint of the individual drivers and from the viewpoint of the traffic manager. All necessary information must be brought together and a complex data‐bank system for road transport should be installed. As examples of advanced information systems the concepts of the ‘Wolfsburg wave’ for in‐car speed recommendation and of the LISB field experiment in route guidance in Berlin are explained.     

Measuring crowding-related comfort in public transport

ABSTRACT

In this paper we focus on the estimation of crowding in public transport – specifically urban rail systems – and its effect on perceived comfort. It is different from similar studies in the method it employs for estimating crowding levels in vehicles. Specifically, we formulate a function of time and location, which uses only passenger embarking data to estimate the number of passengers in vehicles. Then we convert the estimated crowding values into perceived discomfort levels by trip section. Our method depends on hourly seasonality assumptions but provides good estimates of crowding in urban rail systems even when passenger alighting data is not available. We illustrate the implementation of our model with the example of the Istanbul Metro system.     

船舶法定证书安全检查缺陷案例分析

船舶法定证书是指由有关公约的一个缔约国或由代表缔约国经认可的机构，或由船旗国或由船旗国经认可的机构，经法定检验后直接签发的，包括准确和有效的日期，符合有关公约、规则规定并载明船舶、船员和设备细目的格式化证书。