Design and evaluation of an integrated inventory and transportation system

This paper proposes the adoption of an integrated inventory and transportation system (IITS) to minimize the total costs of inventory and transportation. A non-linear programing is developed by analyzing transportation and inventory costs with one supplier and many retailers in the distribution environment. The paper compares the proposed model with the traditional approach in computing total costs with numerical data. The results indicate that the total costs can be optimized by adopting integrated programing rather than the traditional approach, along with achieving improved customer service levels. In particular, sensitivity analysis is applied to determine the performance of the IITS under various transportation costs, holding costs and shortage costs. It shows that the transportation cost per unit is most sensitive in the proposed model. In this situation, the IITS is more effective for cost saving when set-up cost, holding and shortage costs are high, but is less effective for situations involving high per-unit transportation costs.     

Evaluation of general aviation management at Denver Stapleton airport

The potential benefits of general aviation management at a major airport is examined in this paper. The three general aviation management techniques investigated are volume reduction, runway segregation and time restriction.

First, a methodology for analyzing these techniques is discussed. The various effects on each user group are quantified for economic comparison between each management technique attempted. A computer simulation model was used to measure the delay effects. Then, these techniques are applied to Denver Stapleton Airport to measure their effects in present and future scenarios.

The results show that the best general aviation management technique is volume restriction. The use of peak‐hour pricing mechanism provided better results than random rejection, particularly if only a small degree of diversion is desired. The construction of a new general aviation runway provided equivalent results to the best technique tested.     

Book review

Abstract

In April 1983, the “Fourth World Conference on Transport Research” was held in Hamburg. For a period of four days, experts from all parts of the world discussed transport research and planning problems. The discussions were divided into eight so‐called ‘sub‐topics’. Fortunately, one of the sub‐topics, ‘Man and his Transport Behaviour’ (chaired by Moshe Ben‐Akiva, U.S.A. and Werner Brog, Federal Republic of Germany) dealt with the individual and his behaviour. This complemented the traditionally supply‐oriented thinking of the transport planners by introducing the demand component which had frequently been neglected in the past. Since the view has become increasingly widespread that transport is meant to serve people and thus that research should emphasize the (potential) users of the transport system, the number of papers submitted and presented on this sub‐topic was especially large.

However, the number of papers which could be included in the ‘Conference Proceedings’ was limited and this would have meant that a number of interesting documents could not be published. Therefore, papers on four special areas within this sub‐topic are to be published in four consecutive issues of Transport Reviews. The areas which will be dealt with are ‘Telecommunications’, ‘Non‐Motorised Transport’, ‘Special Problems in Third World Countries’ and ‘Fare Structures in Public Transport’. The papers were selected strictly according to their contents. A brief commentary in each issue explains in turn the reasons for choosing each of the four subject areas.     

Goods transport in Etarea

Etarea is a planned satellite town for Prague, the capital of Czechoslovakia, located some 10 km from the outskirts of the capital. Its projected population of 135,000 will live in 13 residential areas, each of which will have its own retail centre in addition to the main retail centre.The plans for Etarea incorporate a unique approach to the related problems of the storage and distribution of goods within urban areas. All incoming goods will be delivered by road or rail, and possibly in the future by water, to a central storage complex. Goods for the retail trade are distributed from this central store by automated trains pulled by battery-powered trucks, each train having a capacity of 8.75 tons. The trains, which run in a network of underground tunnels, 2 \sX 2.5 meters in cross section, are guided by an optical sensing system. The underground network comprises 3 main routes with branches serving the individual centres. Secondary storage facilities are planned for each of the 14 retail centres where unit loads received from the main storage centre are subdivided for retail sale.One of the proposed methods of retail distribution provides for the fully automated delivery of goods from the retail centres direct to the consumer's household. This is accomplished by means of a pneumatic tube system similar to that used for handling cash in some large stores. Orders will be placed by dialling the code number assigned to the required item, given in a catalogue of available goods. Provided that the customer's account is in credit the order will be accepted and the goods automatically dispatched from the local centre; delivery is estimated to take between 2.5 and 11.5 minutes depending on the distance of the customer's house from the centre. The same system is utilised for the delivery of regular orders for such items as newspapers and magazines as well as for mail and for the the removal of household refuse. In addition to the automated system each retail centre will also have over-the-counter, self-service and slot machine facilities for the sale of goods.All proposals for goods storage and distribution planned for Etarea are based on existing technologies.     

Major sources of hydrocarbon emissions in a premixed charge compression ignition engine

Although premixed charge compression ignition (PCCI) combustion engines are praised for potentially high efficiency and clean exhaust, experimental engines built to date emit more hydrocarbons (HCs) and carbon monoxide (CO) than the conventional machines. These compounds are not only strictly controlled components of the exhaust gas of road vehicles but are also an energy loss indicator. The prime objective of this study was to investigate the major sources of the HCs formed in the combustion chamber of an experimental PCCI engine in order to suggest some effective technologies for HC reduction. In this study, to explore the dominant sources of HC emissions in both operation modes, a single cylinder engine was prepared such that it could operate using either conventional diesel combustion or PCCI combustion. Specifically, the contributions of the top-ring crevice volume in the combustion chamber and the bulk quenching of the lean mixture were investigated. To understand the influence of the shape and magnitude of the crevice on HC emissions, the engine was operated with 12 specially prepared pistons with different top-ring crevices installed one after another. The engine emitted proportionally more HCs as the depth of the crevice increased as long as the width remained narrower than the prevailing quench distance. The top-ring-crevice-originated exhaust HCs comprised approximately 31% of the total HC emissions in the baseline condition. In a series of tests to estimate the effects of bulk quench on exhaust HC emissions, intake air was heated from 300K to 400K in steps of 25K. With the intake air heated, HC and CO emissions decreased with a gradually diminishing rate to zero at 375K. In conclusion, the most dominant sources of HC emissions in PCCI engines were the crevice volumes in the combustion chamber and the bulk quenching of the lean mixtures. The key methods for reducing HC emissions in PCCI engines are minimizing crevice volume in the combustion chamber and maximizing intake air temperature allowed based on the permissible NOx level.     

Influence of AC system design on the realisation of tractive efforts by high adhesion locomotives

The main task for heavy haul railway operators is to reduce the cost of exported minerals and enhance the long-term viability of rail transport operations through increasing productivity by running longer and heavier trains. The common opinion is that this is achievable by means of implementation of high adhesion locomotives with advanced AC traction technologies. Modern AC high adhesion locomotives are very complex mechatronic systems and can be designed with two alternative traction topologies of either bogie or individual axle controls. This paper describes a modelling approach for these two types of AC traction systems with the application of an advanced co-simulation methodology, where an electrical system and a traction algorithm are modelled in Matlab/Simulink, and a mechanical system is modelled in a multibody software package. Although the paper concentrates on the analysis of the functioning for these two types of traction control systems, the choice of reference slip values also has an influence on the performance of both systems. All these design variations and issues have been simulated for various adhesion conditions at the wheel–rail interface and their influence on the high traction performance of a locomotive equipped with two three-axle bogies has been discussed.     

Vehicle response-based track geometry assessment using multi-body simulation

The assessment of the geometry of railway tracks is an indispensable requirement for safe rail traffic. Defects which represent a risk for the safety of the train have to be identified and the necessary measures taken. According to current standards, amplitude thresholds are applied to the track geometry parameters measured by recording cars. This geometry-based assessment has proved its value but suffers from the low correlation between the geometry parameters and the vehicle reactions. Experience shows that some defects leading to critical vehicle reactions are underestimated by this approach. The use of vehicle responses in the track geometry assessment process allows identifying critical defects and improving the maintenance operations. This work presents a vehicle response-based assessment method using multi-body simulation. The choice of the relevant operation conditions and the estimation of the simulation uncertainty are outlined. The defects are identified from exceedances of track geometry and vehicle response parameters. They are then classified using clustering methods and the correlation with vehicle response is analysed. The use of vehicle responses allows the detection of critical defects which are not identified from geometry parameters.