Competition and ownership in land passenger transport: the fourth international conference — Part 2

In the rail industry worldwide, there has been a search for new solutions, including restructuring, corporatization, and outright privatization, but the complexity of the rail industry offers special problems. In the Workshop we looked in detail at the British, Swedish, German, Australian (New South Wales) and New Zealand experiences, as well as considering more general issues such as cost structures, vertical separation and competitive tendering. Whilst it was agreed that some developments, such as greater contracting out, were clearly beneficial, other developments such as the separation of infrastructure from operations remained of uncertain value until the issues of efficient pricing and slot allocation were resolved.     

Goods transport in Etarea

Etarea is a planned satellite town for Prague, the capital of Czechoslovakia, located some 10 km from the outskirts of the capital. Its projected population of 135,000 will live in 13 residential areas, each of which will have its own retail centre in addition to the main retail centre.The plans for Etarea incorporate a unique approach to the related problems of the storage and distribution of goods within urban areas. All incoming goods will be delivered by road or rail, and possibly in the future by water, to a central storage complex. Goods for the retail trade are distributed from this central store by automated trains pulled by battery-powered trucks, each train having a capacity of 8.75 tons. The trains, which run in a network of underground tunnels, 2 \sX 2.5 meters in cross section, are guided by an optical sensing system. The underground network comprises 3 main routes with branches serving the individual centres. Secondary storage facilities are planned for each of the 14 retail centres where unit loads received from the main storage centre are subdivided for retail sale.One of the proposed methods of retail distribution provides for the fully automated delivery of goods from the retail centres direct to the consumer's household. This is accomplished by means of a pneumatic tube system similar to that used for handling cash in some large stores. Orders will be placed by dialling the code number assigned to the required item, given in a catalogue of available goods. Provided that the customer's account is in credit the order will be accepted and the goods automatically dispatched from the local centre; delivery is estimated to take between 2.5 and 11.5 minutes depending on the distance of the customer's house from the centre. The same system is utilised for the delivery of regular orders for such items as newspapers and magazines as well as for mail and for the the removal of household refuse. In addition to the automated system each retail centre will also have over-the-counter, self-service and slot machine facilities for the sale of goods.All proposals for goods storage and distribution planned for Etarea are based on existing technologies.     

Major sources of hydrocarbon emissions in a premixed charge compression ignition engine

Although premixed charge compression ignition (PCCI) combustion engines are praised for potentially high efficiency and clean exhaust, experimental engines built to date emit more hydrocarbons (HCs) and carbon monoxide (CO) than the conventional machines. These compounds are not only strictly controlled components of the exhaust gas of road vehicles but are also an energy loss indicator. The prime objective of this study was to investigate the major sources of the HCs formed in the combustion chamber of an experimental PCCI engine in order to suggest some effective technologies for HC reduction. In this study, to explore the dominant sources of HC emissions in both operation modes, a single cylinder engine was prepared such that it could operate using either conventional diesel combustion or PCCI combustion. Specifically, the contributions of the top-ring crevice volume in the combustion chamber and the bulk quenching of the lean mixture were investigated. To understand the influence of the shape and magnitude of the crevice on HC emissions, the engine was operated with 12 specially prepared pistons with different top-ring crevices installed one after another. The engine emitted proportionally more HCs as the depth of the crevice increased as long as the width remained narrower than the prevailing quench distance. The top-ring-crevice-originated exhaust HCs comprised approximately 31% of the total HC emissions in the baseline condition. In a series of tests to estimate the effects of bulk quench on exhaust HC emissions, intake air was heated from 300K to 400K in steps of 25K. With the intake air heated, HC and CO emissions decreased with a gradually diminishing rate to zero at 375K. In conclusion, the most dominant sources of HC emissions in PCCI engines were the crevice volumes in the combustion chamber and the bulk quenching of the lean mixtures. The key methods for reducing HC emissions in PCCI engines are minimizing crevice volume in the combustion chamber and maximizing intake air temperature allowed based on the permissible NOx level.     

西藏复杂地质环境下路基加宽拼接方案试验研究

针对西藏某公路的加宽改造,提出了5种新旧路基加宽拼接方案.按这5种方案,共修筑了3段试验路.对试验路的设计原则、施工要求和工艺进行了讨论.通过试验数据,对各种拼接方案的效果进行了比较分析.结果表明,用5层双向土工格栅自路基顶面向下,以层间距30 cm的加筋方式加强新旧路基间的结合是较好的路基加宽拼接方案.     

High-strain-rate fracture of adhesively bonded composite joints in DCB and TDCB specimens

Double-cantilever beam (DCB) and tapered double-cantilever beam (TDCB) specimens are the test configurations most commonly used to measure the fracture toughness of composites and adhesive joints. Strain rates of 1 to 18.47 m/s were applied to the test specimens via high-speed hydraulic test equipment. Because the fracture occurs through the adhesively bonded joints and the cracks grow rapidly, the crack length and beam displacement were recorded by a high-speed camera. An energy range from 0 to 10 J was often observed in the high-strain-rate fracture experiments for nonlinear plastic behavior of the dynamically loaded adhesively bonded DCB and TDCB specimens. The range of energy release rates (fracture energy) for TDCB specimen was 2 to 3 times higher than that of a DCB specimen for all high strain rates. The fracture energy of automotive adhesive joints can be estimated using the experimental results in this study for the fracture toughness (G_IC) under high rates of loading. The crack grows as the applied fracture energy exceeds the value of the critical energy release rate (G_IC) at the crack tip. The energy release rate was calculated using the fracture mechanics formula. The key fracture mechanics parameter, the fracture energy GIC, was ascertained as a function of the test rate and can be used to assess and model the overall joint performance.     

Evasive manoeuvres with a steering robot

In the pursuit of an objective rating on vehicle stability performance, it is always desirable to reduce disturbances and inconsistencies during experimental evaluations, especially the ones introduced by human drivers. This paper presents the development of a steering robot designed for closed-loop steering tasks during evasive manoeuvres. It describes the controller structure and discusses experimental results, in addition to simulation/vehicle model verifications and theoretical control analysis.     

Experimental investigation using CFD for thermal performance of ventilated disc brake rotor

In the present work, different ventilated disc brake rotor configurations were analysed to enhance the heat transfer rate and obtain the uniform temperature distribution in the rotor. CFD code used in this work was validated at using experimental results obtained by conducting experiments on a test rig. The experimental analysis was performed to calculate the mass flow rate and heat dissipation through the rotor. Further, different types of rotor configurations viz. straight radial vane (SRV), tapered radial vane (TRV), alternate long and short vane (ALSV), variable diameter circular pillars (VDCP) were considered for the analysis. A rotor segment of 20° was considered for the numerical analysis due to its rotational symmetry. CFD results were in good agreement with the experiments. The maximum deviation of the numerical results were about 12 % from the experimental results. It is found from the analysis that among the different types of rotor configurations; variable diameter circular pillars (VDCP) rotor gives better rate of heat dissipation with more uniform temperature distribution in the flow passages. Hence for modern high speed vehicles VDCP rotor may be more appropriate.