Vibration transmission reduction from a centrifugal turbo blower in a fuel cell electric vehicle

This paper presents a multi-body flexible dynamic analysis of a centrifugal turbo blower for a fuel cell electric vehicle (FCEV) based on the application of computer-aided engineering (CAE) to predict the acceleration at the mount position of the blower. This predicted acceleration is validated by using the measured acceleration data. The numerical simulation for the multi-body flexible dynamics of the blower is used not only to identify the most effective mount among four mounts in an FCEV by controlling the complex stiffness of the isolator, but also to suggest the range of complex stiffness of the isolator at the most effective mount. This numerical simulation technology can be useful for the estimation of the variation of vibration transmission for the structural modification of the turbo blower.     

Robust optimization design method for powertrain mounting systems based on six sigma quality control criteria

This paper presents a robust optimization design method based on Six Sigma quality control criteria to improve the design of a powertrain mounting system (PMS). The powertrain is modeled as a rigid body having six degrees of freedom (DOF) connected to a rigid base by four rubber mounts, and each mount is simplified as a three-dimensional spring-damper element in its local coordinate system (LCS). The calculation method based on energy decoupling is used to estimate the decoupling ratios of a PMS. The location and static stiffness of each mount and the orientations of the two anti-torsion mounts are selected as uncertain design variables, and the nominal values of these design variables are optimized to obtain a robust Six Sigma design for a PMS. The uncertain design variables are characterized by a perturbation or percent variation around their nominal values. The generalized reduced gradient (LSGRG2) optimization method is employed to solve the robust optimization problem, and a second-order Taylor series expansion is used to estimate the statistical properties of the performance constraints and objectives. The optimization results show that the robust design ensures good robustness or high reliability for the natural frequencies, decoupling ratios, and frequency separation constraints of a PMS.     

Evaluation of Potentially Successful Barge Innovations

Abstract

The main objective of this article is to analyse the changes in productivity of the Taiwan Bus Transit System (TBTS) before and after the execution of the ‘Alternatives for Promoting the Development of the Public Transportation Sectors’ (APDPTS), which is designed to provide a better operating environment for the public transport sector in the provision of public transit services. We use a decomposition of the Malmquist productivity index to locate the sources of productivity growth, namely technical change and efficiency change. The former is further decomposed into an output bias, an input bias and a magnitude term to test neutrality. The latter is also decomposed into changes in pure technical efficiency and scale efficiency. In our case, between the pre‐ and post‐APDPTS periods, the efficiency increased only marginally. As a result of a five‐year enhancement programme, the technical regress slowed down slightly, and inward neutral shifts of a transformation frontier were interpreted as being the main contributor to technical regress. In particular, evidence of biased technical change was found, i.e., the effects of output capability increased slightly, but the efficient use of inputs declined during the post‐APDPTS period.     

Synchronized Production and Transportation Planning Using Subcontracted Vehicles in a Production-Distribution Network

Abstract

Effective management of interfaces between procurement, supply, production and distribution for higher efficiency in the supply chain is an important issue in global manufacturing, where the synchronization of production and transportation planning represents important savings in operational costs. This paper focuses on the synchronization of production planning and transportation planning in a production distribution network, where transportation is subcontracted to a professional transportation enterprise (PTE) for vehicle-hiring. Dynamic and flexible numbers of vehicles are used to cater for fast changing market demands. Thus, the number of vehicles to be hired is viewed from the planning point of view as an operational decision considered simultaneously with production and transportation planning. A mathematical model – SPTP/MTDS – for synchronized production and transportation planning under multiple times and direct shipping strategy (MTDS) is discussed, and a Lagrange relaxation decomposition-based two layer decision procedure (LRD-TLDP) is developed. By introducing artificial decision variables and Lagrange multipliers, SPTP/MTDS is decomposed into a production decision sub-problem (SPTP-PD), and a distribution decision sub-problem (SPTP-DD). A priority-based assignment heuristic and a partial chain-based genetic algorithm are developed to solve SPTP-PD and SPTP-DD, respectively. An illustration of the application of the model in an electronic appliance manufacturing enterprise in China is presented.     

Urea-SCR system optimization with various combinations of mixer types and decomposition pipe lengths

The demand for NO_x after-treatment system has increased dramatically due to the stricter NO_x emission regulations for diesel vehicles. The urea-SCR system is one of the NO_x after-treatment methods found to be quite effective to meet the regulation requirement enforced by various authorities including the Euro-6. In order to develop an effective urea-SCR system, it is critical to establish an even distribution of reductant over the catalyst surface since this favorable distribution can increase reduction reaction and in turn, improve NO_x conversion efficiencies. In the current study, a number of design variations of the urea-SCR system which included two mixer types and three decomposition pipe lengths, were evaluated systematically using CFD analysis and experimental measurements. The purpose of the CFD analysis was to estimate the distribution of reductant within the urea-SCR system with a specific configuration and the purpose of the engine emission test was to measure the amount of NO_x reduction, respectively. The results from the systematic analysis revealed the relation between the reductant distribution over the SCR and the performance of the NO_x reduction.     

Exploring the role of individual attitudes and perceptions in predicting the demand for cycling: a hybrid choice modelling approach

Cycling is often promoted as a means of reducing urban congestion and improving health, social and environmental outcomes. However, the quantification of these potential benefits is not well established. This is due in part to practical difficulties in estimating cycling demand and a lack of sound methodologies to appraise cycling initiatives. In this paper we attempt to address this need by developing predictive models of cycle demand, relative to other transport modes, that capture not only the impacts of observed characteristics such as age and travel time but also the role of attitudes and perceptions. Using data from a stated preference survey, we estimate a hybrid choice model for cycle use that incorporates the role of attitudes towards cycling, perceptions of the image associated with cycling, and the stress arising from safety concerns. Model results indicate that the latent attitudes and perceptions explain an important part of the non-observable utility in a simple multinomial logit choice model. We also demonstrate policy analysis using the hybrid choice model, which allows comparisons of ‘hard’ policies such as the provision of parking facilities against ‘soft’ measures such as cycle promotion schemes.     

Repetitions in individual daily activity–travel–location patterns: a study using the Herfindahl–Hirschman Index

Using Herfindahl–Hirschman Index and the Mobidrive and Thurgau six-week travel diary datasets this paper examines the degree of repetition of individuals’ choices of their daily activity–travel–location combinations. The results show that the repetitiveness of individual activity–travel–mode–location combinations is highly influenced by the individuals’ out-of-home commitments, the intra-household conditions and the availability and the accessibility of the activity locations. Different types of activity have different pattern of repetition. The level of repetition of individual’s daily activity–travel pattern is less correlated to travel mode choice, but more to the individuals’ commitments and obligations. The repetitiveness of mode choices is more related to the conditions or the accessibilities of the activity location, but not directly to the activity itself.     

Construction Risk Management for Deep Excavation Adjacent to In operation Bored Tunnels

营运中的盾构隧道在邻近施工时周围地盘的应力可能因扰动而重新分布,使得盾构隧道暴露在因变形或位移衍生的结构损坏或营运中断等高风险下。为降低相关风险发生的可能性或后果的严重性,高雄计划将高雄车站段地下化工程捷运-R11永久站施工纳入风险管理,通过风险辨识、分析、评估以及以监测、巡检及沟通为基础的风险追踪查核等手段执行风险管理。依本计划执行成果,位于基地两侧营运中的盾构隧道在永久站主体工程开挖施工期间,各项风险均受到妥善的追踪、管控及处置。     

An experimental study of the effect of low-noise wheels in reducing noise and vibration

Wheel/rail interaction is a major source of railway noise. A low-noise wheel structure is developed and its effect on noise reduction is investigated. This low-noise wheel employs a rubber material inserted into the steel rim or mounted on the wheel surface. The low-noise wheel has low stiffness and a high-damping ratio compared to a solid wheel. Measurement shows that it reduces rolling and squealing. It turns out that a subway line with the proposed wheel could reduce its interior noise level by 4–5 dB(A) and vehicle vibration level by 7–8 dB. While the proposed structure seems promising in noise reduction for railway vehicles, the endurance and cost effectiveness of the low-noise wheel are yet to be verified.     

Persuasibility and its assessment

Persuasive technology is the use of computers, devices or applications to change a person’s attitudes or behavior. Persuasibility design within the system life-cycle is a nascent area of research which is different from design in the traditional method. This paper focuses on the research of persuasibility design and its assessment in the system life-cycle. A life-cycle oriented systemic general theory is developed in this paper to evaluate persuasibility design. Persuasibility assessment is considered as a part of persuasibility design. Its procedure and method are explored and analyzed based on the system life-cycle in this paper. A possible research direction is to create more explicit and detailed persuasion design and assessment methods which can be used not only in personal computer persuasive application, but also many other electric devices that are designed for persuasion purposes.