Recent sedimentary study of the shelf of the Basque country

The Northern Iberian margin of the Spanish Basque country (provinces of Gipuzkoa and Viscaia) is characterized by a narrow continental platform, which receives inputs of riverine particulate matter from the numerous riverine systems located within the Basque country. This particulate matter is subsequently deposited within the Bay of Biscay, and Gouf de Capbreton [Frouin, R., Fiuza, A.F.G., Ambar, I., Boyd, T.J., 1990. Observations of a poleward surface current off the coasts of Portugal and Spain during winter. Journal of Geophysical Research 95 (C1), 679–691]. The main goal of this study is to establish a map of the surface sediment distribution of the Basque continental shelf and more specifically to map the muddy patch located at the eastern side of that continental shelf.Three oceanographic cruises were conducted in 2003 and 2004. From these campaigns 340 surface samples, 12 short cores and 3 gravity cores have been collected over the mid and outer shelf from depths ranging between 50 m and 150 m deep. 3 seismic profiles were obtained across the shelf mud patch using a Sparker device.Sediment grain-size analyses were performed by the classical physical method of sieving and use of settling columns. The POC (Particular Organic Carbon) amounts in sediment and water samples were determined using the Strickland and Parsons' method [Strickland, J.D.H., Parsons, T.R., 1972. Determination of particulate carbon. In : A practical handbook of seawater analysis. Fisheries ResearchBoard of Canada, Ottawa, pp. 207−211] as adapted by Etcheber [Etcheber, H., 1981. Comparaison des diverses méthodes d'évaluation des teneurs en matières en suspension et en carbone organique particulaire des eaux marines du plateau continental aquitain. Journal de Recherche Océanographique VI (2), 37−42]. Radioisotopic measurements (²¹⁰Pb_exc) were made using a semi-planar germanium detector coupled to a multichannel analyser. Radiographical analysis was performed with an X-ray equipment (SCOPIX®) coupled with a radioscopy instrumentation and processing unit.Firstly, a detailed sedimentological map of this shelf has been produced and secondly, geophysical surveys have precisely mapped the geometry of the main mud patch on the continental shelf. In the mud patch itself the rates of sedimentation are between 0.13 and 0.50 cm yr^− 1. The maximum rate of sedimentation is located in the central mud patch, whereas the minimum rate of deposition occurs close to the rocky outcrops. These results seem to be in agreement with the estimation of the total thickness of the mud patch revealed by seismic profiles. The central part corresponds to the maximum thickness of 7 m.Interpretations of the associated oceanic current forcing factors (current direction, wave fetch and wind directional modes) relating to the identified sediment depositional zones are also undertaken.     

Highway and transportation planning in England

This article presents an overview of highway and transportation planning in England. It covers the division of responsibilities between central and local government; the organisation of the Department of Transport; the planning, financing and implementation of road schemes, both local and national. A very brief review of transport legislation is included.NOTE: This paper was printed before the UK General Election of May 1979. The Department of Transport is now responsible to the Minister of Transport. The Minister has similar responsibilities to those previously exercised by the Secretary of State for Transport as referred to in this paper. The views expressed in this paper are those of the writer and are not necessarily those of the Department of Transport.     

Vehicle distance estimation using a mono-camera for FCW/AEB systems

For robust vision-based forward collision warning (FCW) and autonomous emergency braking (AEB) systems, not only reliable detection performance including high detection rate and low false positives but also accurate measurement output of a target vehicle is required. Especially, in order to reduce false alarm or activation of FCW/AEB systems, the systems require the precise measurement output of a target object, such as position, velocity, acceleration, and time-to-collision (TTC). In this study, we developed a measurement estimation algorithm of a target vehicle using a monocular camera. This method estimates two cases of vehicle widths for a target vehicle by using the detected lane information and a pin-hole camera model. After that, the position, velocity, acceleration, and TTC of a target vehicle are estimated by using a Kalman filter for the each estimated vehicle width. To improve robustness, the both estimation results using the detected lane information and the pinhole camera model are fused. This estimation algorithm was evaluated and compared with the state-of-the-art technology. As a result, the proposed measurement output estimation method can improve the performance of the FCW/AEB systems.     

Comparing Fisher Interviews,Logbooks, and Catch Landings Estimates of Extraction Rates in a Small-Scale Fishery

Researchers are turning to alternative data sources (e.g., resource user knowledge) to provide information required for wildlife management. Little is known about the reliability of data elicited from resource users relative to data obtained from user-independent approaches (e.g., observations of fish catches). We test for consensus among three methods that quantify past (1996 to 2007) seahorse catch-per-unit-effort (CPUE) for a small-scale, data-poor fishery in the Philippines: interviews with fishers about good, bad, and typical catch; fisher logbooks; and observations of catch landings. Interviews and logbooks indicated no trends in CPUE through time, consistent with results from the fisher-independent metric, catch landings. Although interview estimates of “typical” CPUE greatly exceeded “typical” observed catches and logbook estimates, interview estimates of “bad” CPUE were comparable. Catch landings estimates for a fisher in a particular year were uncorrelated to what he reported during retrospective interviews. Interviews should be used cautiously to inform specific catch targets (e.g., total allowable catches), although including interview questions about a range of catch experiences (e.g., good, bad and typical), may improve interview-derived data. Logbooks are particularly useful for capturing information about fishing expeditions that produce no fish, which are largely missed by other methods.     

Actively translating a rear diffuser device for the aerodynamic drag reduction of a passenger car

This research aims to develop an actively translating rear diffuser device to reduce the aerodynamic drag experienced by passenger cars. One of the features of the device is that it is ordinarily hidden under the rear bumper but slips out backward only under high-speed driving conditions. In this study, a movable arc-shaped semi-diffuser device, round in form, is designed to maintain the streamlined automobile??s rear underbody configuration. The device is installed in the rear bumper section of a passenger car. Seven types of rear diffuser devices whose positions and protrusive lengths and widths are different (with the basic shape being identical) were installed, and Computational Fluid Dynamics (CFD) analyses were performed under moving ground and rotating wheel conditions. The main purpose of this study is to explain the aerodynamic drag reduction mechanism of a passenger car cruising at high speed via an actively translating rear diffuser device. The base pressure of the passenger car is increased by deploying the rear diffuser device, which then prevents the low-pressure air coming through the underbody from directly soaring up to the rear surface of the trunk. At the same time, the device generates a diffusing process that lowers the velocity but raises the pressure of the underbody flow, bringing about aerodynamic drag reduction. Finally, the automobile??s aerodynamic drag is reduced by an average of more than 4%, which helps to improve the constant speed fuel efficiency by approximately 2% at a range of driving speeds exceeding 70 km/h.     

Robust design optimization of suspension system by using target cascading method

This study presents the robust design optimization process of suspension system for improving vehicle dynamic performance (ride comfort, handling stability). The proposed design method is so called target cascading method where the design target of the system is cascaded from a vehicle level to a suspension system level. To formalize the proposed method in the view of design process, the design problem structure of suspension system is defined as a (hierarchical) multilevel design optimization, and the design problem for each level is solved using the robust design optimization technique based on a meta-model. Then, In order to verify the proposed design concept, it designed suspension system. For the vehicle level, 44 random variables with 3% of coefficient of variance (COV) were selected and the proposed design process solved the problem by using only 88 exact analyses that included 49 analyses for the initial meta-model and 39 analyses for SAO. For the suspension level, 54 random variables with 10% of COV were selected and the optimal designs solved the problem by using only 168 exact analyses for the front suspension system. Furthermore, 73 random variables with 10% of COV were selected and optimal designs solved the problem by using only 252 exact analyses for the rear suspension system. In order to compare the vehicle dynamic performance between the optimal design model and the initial design model, the ride comfort and the handling stability was analyzed and found to be improved by 16% and by 37%, respectively. This result proves that the suggested design method of suspension system is effective and systematic.     

Factors Influencing Behavior in a Boating Speed Zone

The greatest source of human-related mortality for endangered Florida manatees is collisions with watercraft. Regulation of boat speeds is the principal management tool to minimize this threat. Demands on law enforcement limit their ability to monitor boater behavior and managers seek alternative strategies to increase compliance. The purposes of this study were to: (1) explore the effectiveness of an on-site sign to enhance boater compliance in a boating speed zone, and (2) examine the environmental and boating characteristics that influence the probability of compliance. Signs designed to increase compliance were posted halfway through the 18-week study period. The signs were not related to compliance level. Logistic regression models showed that only time of day and boat type were significantly related to compliance. Results suggest that passive methods of persuasion may not be an effective means of influencing boater behavior.     

A fuzzy logic-genetic algorithm approach to modelling public transport users’ risk-taking behaviour

This paper seeks to determine the effects of uncertainty in out-of-vehicle times on route choice. Data were collected at two key interchanges in Auckland, New Zealand. Previous work modelled the data using a manual approach to fuzzy logic. This study extends that work by automating the process through defining a black-box function to match the survey data, then employing a genetic algorithm to fine-tune the fuzzy logic model. Results show that automation and the genetic algorithm improve the model’s capability to more accurately predict ridership. The tuning of the membership functions is conducted twice, first using initial fuzzy rules and again after the fuzzy rules have been adjusted to reduce disparity between the output and survey data. The calibrated membership functions provided for operational (transfer waiting and walking time and delay) and physical attributes (safety and seat availability) can be used by practitioners to determine an estimated ridership.     

Scientific requirements for an abyssal benthic laboratory

For over thirty years man has studied “outer space” and installed satellites which watch the surface of the Earth. The great depths of the world ocean are, however, practically unknown and there is an urgent need to put abyssal benthic laboratories into “inner space” in order to study basic phenomena of interest to marine science and climatology as well as man's impact on the oceans.In view of the numerous problems related to global change, as a first step emphasis should first be on the role of the oceans and their inherent processes, which are the focus of such international programmes as the World Ocean Circulation Experiment (WOCE) and the Joint Global Ocean Flux Study (JGOFS). Multi-disciplinary registration of key events at selected key sites investigating the variability in time and space are of the utmost importance. The same methods and techniques must be used for the study of human impacts on the deep oceans caused by mining of metalliferous resources and by waste disposal as well as in basic studies. However, the investigation of the inner space of our planet has certain requirements. As long-term and large-scale investigations become more and more important, development of automized systems, largely independent from research vessels will be required. This will demand high capacities of energy for all technical functions as well as high storage capacities for data and samples. As a consequence the needs for two different—although overlapping—functional approaches are defined for future deep-sea deployments.(A) A system for long-term registration of the natural variability and long-term monitoring of human impacts: (B) A system for short-term observations and short-time experimentations. This report summarizes their technological demands. The envisioned interdisciplinary technology should deliver information on physical, biological and geochemical processes and their variabilities in the deep oceans. The prospected systems need to have the ability for real time video observation, data transfer and experimental manipulation, as well as sensing and sampling facilities with large storage capacities for long-term deployments.Prospective costs of the described multipurpose abyssal benthic laboratory will presumably exceed the funds for deep-sea research of a single country. A joint European effort could solve this problem and help to manifest a leading role for European marine science in international deep-sea and global change research.