Development of algorithms for commercial vehicle mass and road grade estimation

Estimation algorithms for road slope angle and vehicle mass are presented for commercial vehicles. It is well known that vehicle weight and road grade significantly affect the longitudinal motion of a commercial vehicle. However, it is very difficult to measure the weight and road slope angle in real time because of lack of sensor technology. In addition, the total weight of a commercial vehicles varies depending on the freight. In this study, the road grade and vehicle mass estimation algorithms are proposed using the RLS (Recursive Least Square) method and only the in-vehicle sensors. The proposed algorithms are verified in experiments using a commercial vehicle under various conditions.     

Analytical description of ride comfort and optimal damping of cushion-suspension for wheel-drive electric vehicles

To provide initial design values of seat cushion and chassis suspension damping for wheel-drive electric vehicles (WDEVs), this paper presents an analytical estimation method and a practical damping parameters design method. Firstly, two formulae of the human body vertical acceleration in terms of the power spectrum density (PSD) and the root mean square (RMS) are deduced for WDEVs. Then, the coupling effects of the key vehicle parameters on ride comfort are revealed. Finally, with a practical example, the damping parameters of the cushion and the suspension are initially designed and analyzed. The results show that when every 10.0 kg increases for motor mass, the optimal damping values of the cushion and the suspension should be reduced by about 15.0 Ns/m and 50.0 Ns/m, respectively. However, the RMS acceleration increases 0.017 m/s² with a decrease of 2.5 % for ride comfort.     

The measurement of accessibility: Some preliminary results

This paper presents an analysis of accessibility by private transport, using a Hansen type measure of accessibility. The data base is the 1962 London Travel Survey. The study is confined to car-owning households residing in inner London. A comparison of the patterns of accessibility associated with four measures of areal attractiveness - total employment, retail employment, households and population - is presented. The sensitivity of relative accessibilities to marginal changes in parameter values is analysed. Two aspects of the effect of the zoning system on the measurement of accessibility are investigated: the effects of zonal configuration and zonal aggregation. First, the implications of increasing the size of central area zones is analysed. Second, a comparison of patterns of accessibility calculated at the zonal and district levels is undertaken.[/p]     

Characterization and evolution of spatial density patterns in urban areas

This paper examines the spatial patterns of population density, household automobile ownership and other socio-demographic variables that affect urban travel, as a function of distance from the central city core. Spatial density functions provide a useful characterization of urban structure, and of its evolution when taken at different time intervals. Analysis of the data from four case cities (Austin, Atlanta, Dallas, Phoenix) for 1960, 1970 and 1980 reveals continuing overall dispersion away from the traditional central core, accompanied by the densification of formerly low-density suburbs. This presents implications for high congestion levels in the densifying suburban communities, comparable to those typically associated with the CBD. In addition, the analysis has captured the continuing growth of average household automobile ownership and revealed a distinct spatial pattern that seems to be robust across the case areas considered, as well as within radial corridors in the one case that was so analyzed (Austin).List of symbols Y gross population density in census tractt - X _t distance in miles from the center of tract to the CBD - parameter representing the central business district density - y density gradient parameter - X₀, X₁, X2, and X3 locations of the knots in a three segment division of the x-axis - D_i dummy variable defined for thei-th segment - ₁ normally distributed disturbance term,a _i,b _i,c _i,d _i,i = 1, 2, 3 — parameters to be estimated - A _t area of census tractt     

Research on the Influencing Factors on Quality of Railway Construction EPC Project from the Owner's PerspectiveEI北大核心

Research purposes: With the advancement of system reform of China railway, the railway construction project is promoting the application of general contracting (EPC) model, and in this mode, how the owners effectively control the construction quality has become the focus of the current research. To explore of the key factors influencing quality of railway construction project, based on the owner's perspective, from the three stages of design, procurement and construction selecting 10 factors, the DEMATEL method is adopted to analyze the logical relationship between various factors and mutual influence, screening factors which have higher centrality and causality as the key factors affecting the quality of the owner engineering. Research conclusions:(1) The design port and interface management, the comprehensive strength of the construction companies have high centrality and causality, which are the key factors influencing quality of the EPC railway construction project. (2) The situation of carrying out periodic inspection work belongs to the factor with low centrality and high causality. In the process of improving quality of the EPC railway construction project, this factor can be the secondary consideration. (3) The research result can provide scientific and effective references for improving quality of the EPC railway construction project from the owner's perspective. © 2018, Editorial Department of Journal of Railway Engineering Society. All right reserved.     

Impact Analysis of the Reduction Effect for Reducing Joint Position of Stick-slip Fault TunnelEI北大核心

Research purposes: Based on an engineering of traffic tunnel, anti-breaking model experiment of large-scale 1 :30 is carried out under fault dislocation. Reduction effect of three working conditions(working condition A of no reducing joint, B of staggered setting of reducing joint and dislocation surface, C of reducing joint set at dislocation position) is comparatively analyzed by analysis of contact pressure, lining strain and lining stress. The optimal location of reduction joint is explored. Research conclusions:(1)The reduction effect of different position of reducing joint is different, such as A相似文献   

Combustion optimization model for NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> reduction with an improved particle swarm optimization

Abstract: This paper focuses on the combustion optimization to cut down NO _x emission with a new strategy. Firstly, orthogonal experimental design (OED) and chaotic sequences are introduced to improve the performance of particle swarm optimization (PSO). Then, a predicting model for NO _x emission is established on support vector machine (SVM) whose parameters are optimized by the improved PSO. Afterwards, a new optimization model considering coal quantity and air quantity along with the traditional optimization variables is established. At last, the operating parameters are optimized by the improved PSO to cut down the NO _x emission. An application on 600MW unit shows that the new optimization model can cut down NO _x emission effectively and maintain the load balance well. The NO _x emission optimized by the improved PSO is lowest among some state-of-the-art intelligent algorithms. This study can provide important guides for the low NO _x combustion in the power plant.     

Active Contours and Mumford-Shah Segmentation Based on Level Sets

IntroductionThe basic idea in active contour models orsnakes is to evolve a curve,subject to constraintsfrom a given image,in order to detect objects inthat image.For instance,starting with a curvearound the object to be detected,the curve movestoward its interior normal and has to stop on theboundary of the object.LetΩ be a bounded open subset of R2 ,with Ω its boundary. Let u0 ∶Ω→ R be a given image,and C( s)∶ [0 ,1 ]→ R2 be a parameterized curve. Inthe classical snakes and active…     

基于波叠加原理的辐射声场的计算研究

描述了用波叠加原理来计算任意形状的辐射体的辐射声场的方法。即用叠加来代替Kirchhoff-Helmholtz积分的方法．给定辐射体表面的振动速度就可求解辐射源的强度。进而求解辐射体表面的声压和辐射的声功率．文中对刚性球面上振动活塞源和脉动球源的辐射问题进行了求解。并将之与分析(解析)解进行了对比，结果表明用该方法进行计算时，可以用简单的数字方法产生矩阵元素，从而提高计算速度。结果的精度高。并能克服边界元法声场计算内在的奇异性问题．     

A new buyer-seller watermarking protocol without double embedding

AbstractCopy deterrence is a digital watermarking application which enables a seller to identify the buyers who obtain digital content legally but illegally redistribute it. However, in many buyer-seller watermarking protocols proposed for copy deterrence, the seller has to embed two watermarks into each copy of the digital content before it is sold. In this paper, we propose a new buyer-seller watermarking protocol in which the seller can reduce the number of the embedded watermarks from two to one. The proposed protocol also provides a more efficient solution to the unbinding problem than that of Lei et al’s scheme.