Analytical study of pressure pulsation characteristics according to the geometries of the fuel rail of an MPI engine

In a conventional MPI engine, a pulsation damper is usually mounted on the fuel rail to diminish undesirable noise in the vehicle cabin room; however, pulsation dampers are quite expensive. Therefore, several studies have focused on reducing fuel pressure pulsation by increasing the self-damping characteristics of the fuel rail. This paper details the development of a fuel rail that reduces pulsation using a self-damping effect. Using an oil hammer simulation technique, pressure pulsation characteristics were investigated with respect to the aspect ratio of the cross-section, wall thickness, and fuel rail material. Increasing the aspect ratio and decreasing the wall thickness efficiently reduced the pressure pulsation. In addition, the pressure pulsation characteristics were investigated with respect to the resonant engine speed and injection period. These simulated data can be used to reduce the pressure pulsation peak and to avoid the resonant point in the design stage during the development of a fuel rail.     

Time use,mobility and expenditure: an innovative survey design for understanding individuals’ trade-off processes

A large amount of information is required to model the complex trade-off processes between travel activities, non-travel activities and budget assignment at the individual level. This paper describes the development of a new survey design, which incorporates components of travel surveys, time use surveys and consumer expenditure surveys in an integrated format, which is expected to deliver a richer data set allowing deeper insights into individuals’ activity and consumption patterns. The survey procedure and the incentives paid, which were necessary to obtain acceptable response rates, are also described. Results from two pilot studies using a trip-based and an activity-based diary format are presented. The paper examines to which extent the diaries have been capable of collecting the required data with high quality and response rates. The innovative “Mobility–Activity–Expenditure-Diary” is introduced and results of the main survey using this design are presented. Travel behaviour and non-travel activities were reported at high quality. Expenditures would require longer observation periods (and preferably not only telephone but also personal support in the survey process) to reduce unsystematic variations and to better capture individuals’ long term equilibrium.

     

Merging ICT and informal transport in Jakarta's ojek system

This paper discusses how information and communication technologies (ICT) may influence travel behavior of an informal transport system, and whether and in which ways merging digital technologies represents disruption for a specific sociotechnical ensemble. For decades, ojek has been a form of informal passenger transport, based on motorcycles in Jakarta, and recently smartphone apps have become available in that sociotechnical arrangement. We randomly surveyed passengers and drivers in the central district, for both those who do and do not use these apps. Despite many similarities between both groups, the drivers who use smartphones for their trips reported higher daily incomes, longer average trip distances and a larger coverage area. Passengers using conventional ojek transport reported lower levels of both safety perception and satisfaction when compared to app-based ojek users. For both categories of user, ojek seems to compete with, complement, and be an alternative to bus rapid transit and the suburban rail system (KRL) in the area covered by our sample. The areas covered by regular buses and vans roughly match the origins and destinations of ojek trips.     

A framework for robustness analysis of road networks for short term variations in supply

There is a growing awareness that road networks, are becoming more and more vulnerable to unforeseen disturbances like incidents and that measures need to be taken in order to make road networks more robust. In order to do this the following questions need to be addressed: How is robustness defined? Against which disturbances should the network be made robust? Which factors determine the robustness of a road network? What is the relationship between robustness, travel times and travel time reliability? Which indicators can be used to quantify robustness? How can these indicators be computed? This paper addresses these questions by developing a consistent framework for robustness in which a definition, terms related to robustness, indicators and an evaluation method are included. By doing this, policy makers and transportation analyst are offered a framework to discuss issues that are related to road network robustness and vulnerability which goes beyond the disconnected definitions, indicators and evaluation methods used so far in literature. Furthermore, the evaluation method that is presented for evaluating the robustness of the road network against short term variations in supply (like incidents) contributes to the problem of designing robust road networks because it has a relatively short computation time and it takes spillback effects and alternative routes into account.     

Experiments and thermal-electrical analysis of buss bar and relay assemblies in junction blocks

A junction block (or electrical distribution box) is electrical equipment that has been densely assembled from components such as buss bars, relays, and fuses to control the electric current flow in vehicles. Joule heat is generated in these parts as a result of electrical bulk resistance and electrical contact resistance. The generation of heat increases due to the complex behavior of modern vehicle electronic systems. Overheated parts can be damaged during operation due to thermal energy. The thermal assessment of a junction block is an important issue in automobile development. We suggest a methodology to simulate the transient temperature distribution of buss bars and electrical relays in a junction block. A finite element formulation of a coupled electro-thermal problem, which includes the effect of Joule heating, is introduced to the simulation. Finite element analysis (FEA) and experiments at the component level of buss bars and relays are conducted to investigate the thermal performance of a junction block. To verify the accuracy of the FEA procedure, the temperature history obtained by FEA is compared with the results obtained from experiments. The thermal-electric analysis of a typical junction block assembly is also discussed.     

Zur Steuerbarkeit eines gebremsten Sattelschleppzuges

(Title: On Controllability of a Tractor-Semitrailer Truck During Braking)

The concept of controllability coming from linear system theory is applied to the motion of a tractor-semitrailer vehicle during straight-line braking. Some states of braking with locked up wheels at different axles are considered. The question whether the system is always controllable must be answered in the negative for locked up wheels at the tractors front axle. In other cases controllability in its mathematical meaning which, however, does not always appear to be fully adequate for practical problems, is possible.     

弹性基底上受非均匀荷载加劲板的局部屈曲特性

针对弹性基底上板的局部稳定问题, 应用能量法推导了非均匀荷载作用下矩形加劲板的局部屈曲非线性特征方程, 建立了考虑弹性基底接触和纵向加劲肋作用的屈曲板迦辽金表达式; 基于牛顿迭代法, 建立了局部屈曲的非线性特征方程的增量迭代格式与屈曲荷载特征值的附加迭代方程。分析结果表明: 屈曲系数计算结果与有限元分析结果误差小于2%, 并且避免了有限元模拟的接触分析过程, 计算效率较高; 当荷载梯度为1时, 设置加劲肋的偏心构件的局部稳定性明显增强, 临界屈曲系数增加到51.1, 是普通板件的2.5倍; 加劲板件的纵向鼓曲波的长宽比约为0.6, 鼓曲波纵向排列相对密集, 而普通板件每个鼓曲波的长宽比约为1.0;在不增加加劲肋材料用量的前提下, 设置纵向加劲肋的最优位置为距离板件受压侧边缘的2/5板宽处, 临界屈曲系数增加为78.9, 是普通板件的4倍; 加劲肋的设置可将矩形钢管混凝土壁板的宽厚比增加到172, 将界限值提高2倍以上。可见, 在矩形钢管混凝土管壁设置纵向加劲肋能够有效提高偏压作用下管壁的局部稳定性, 改善矩形钢管混凝土的截面尺寸。     

Development of an electric active rollcontrol (ARC) algorithm for a SUV

Cornering maneuvers with reduced body roll and without loss in comfort are leading requirements for car manufacturers. An electric active roll control (ARC) system controls body roll angle with motor-driven actuators installed in the centers of the front and rear stabilizer bars. A vehicle analysis model developed using a CarSim S/W was validated using vehicle test data. Two ARC algorithms for a sports utility vehicle (SUV) were designed using a sliding-mode control algorithm based on a nonlinear roll model and an estimated lateral acceleration based on a linearized roll model. Co-simulation with the Matlab simulink controller model and the CarSim vehicle model were conducted to evaluate the performance of two ARC control algorithms. To validate the ARC performance in a real vehicle, vehicle tests were conducted at KATECH proving ground using a small SUV equipped with two ARC actuators, upper and lower controllers and a few subsystems. From the simulation and vehicle validation test results, the proposed ARC control algorithm for the developed ARC actuator prototypes improves the vehicle’s dynamic performance.     

Effect of the fuel injection strategy on first-cycle firing and combustion characteristics during cold start in a TSDI gasoline engine

The first firing cycle is very important during cold-start for all types of spark ignition engines. In addition, the combustion characteristics of the first firing cycle affect combustion and emissions in the following cycles. However, the first-cycle fuel-air mixing, combustion and emissions generation within the cylinder of a two-stage direct-injection (TSDI) engine during cold start is not completely understood. Based on the total stoichiometric air-fuel ratio and local richer mixture startup strategy, the first-cycle firing and combustion characteristic at cold start were investigated in a two-stage direct injection (TSDI) gasoline engine. In addition, the effects of the first injection timing, second injection timing, 1st and 2nd fuel injection proportion and total excess air ratio on the in-cylinder pressure, heat release rate and accumulated heat release were analyzed on the basis of a cycle-by-cycle analysis. It is shown that a larger 2nd fuel injection amount and later 2nd injection timing are more beneficial to the firing of the first cycle in the case of a total excess air ratio of 1.0. The optimum 1st and 2nd injection timing fuel injection proportions are 120°CA ATDC during the intake stroke, 60°CA BTDC during the compression stroke and 1:1. In addition, the firing boundary is a 2nd injection timing later than 90°CA BTDC during the compression stroke in the case of the 1st injection timing from 60°CA to 180°CA ATDC during an intake stroke and involves a 1st and 2nd fuel injection proportion of 1:1 and an excess air ratio of 1.0. The study provides a detailed understanding of cold-start combustion characteristics and a guide for optimizing the reliable first-cycle firing at cold start.