Vibrational characteristics of automotive transmission

A mathematical model of an automotive transmission is developed, that considers the flexibility of the shafts, bearings, and gear teeth, and gyroscopic effects of geared rotors. The transverse, torsional, and axial motions are strongly coupled due to helical gearing. The excitation forces acting on the automotive transmission are classified into first, second, and third grades, based on the magnitudes of the forces that are determined by the perturbation method. The excitation forces are caused by the mass imbalances among gears, misalignment of shafts, clearance and non-linear deformation of bearings, transmission errors, and the periodic variation of the gear mesh stiffness. A bench test on loading conditions is carried out for the third speed of the automotive transmission. The experimental results of vibration characteristics are compared with those from theoretical analysis. The results show good agreement, i.e., within a tolerance of 3.3%.     

Computer Aided Simulation on Precision Cold Forging of Universal Joint Cross

IntroductionThefiwtee1emenmethod(FEM)playsanextrmelyimPortantroleintheanalysesofengineeringproblems.ForalongtimethismethodhasmainlybeenaPPliedinthelinearfieldandshownitsgreatpower.HoweveealOtofnonlinearengineeringPrOblemsWhichcanneitherbesimPlyreducedtolinearonesnorrCPresentedbylinearlyanalogywhichshallchnsethePfacticalconditionsrelativelymuch,havechallengedfiniteelementmethod(FEM).RecentymuchProgresshasbeenmadebothinthemathematicalandmechanicaltheoryandthecomPulertechnologysothatevent…     

A decentralized control strategy for freeway regulation

A multilevel decentralized control scheme, the cascading technique, with application to the regulation of traffic on an urban freeway is presented. Performance of the decentralized system is compared to the performance of a centralized and a fixed time control structure. It is shown that the decentralized structure performs better than the centralized structure when incidents (lane closures) occur on the freeway. The freeway is modeled in terms of the aggregate variables section density and section speed, and is considered as a system of interconnected subsystems.     

Transportation impacts of center-based telecommuting: Interim findings from the Neighborhood Telecenters Project

The transportation impacts of center-based telecommuting for 24 participants (representing 69 person-days of travel and 295 trips) in the California Neighborhood Telecenters Project are analyzed. Comparing non-telecommuting (NTC) day to telecommuting (TC) day travel shows that person-trips did not change significantly, whereas vehicle-trips increased significantly (by about one trip) on TC days. Both PMT and VMT decline significantly on TC days: by an average of 68 miles (74%) and 38 miles (65%), respectively. When these savings are weighted by the frequency of telecommuting, overall reductions in PMT and VMT come to 19% and 17%, respectively, of total weekday travel. Commute trips increase slightly (by 0.5 trips) but significantly, mainly due to lunch-time trips made home from the telecenter. Total non-commute travel does not increase, but there is a significant shift from other modes to driving alone on TC days. Commute mode split on NTC days is not affected by telecommuting. Travel on TC days tends to be compressed into fewer hours. Higher numbers of return home, eat meal, shopping, and social/recreational trips are made on TC days, in exchange for a reduction (to zero) in the number of change mode trips.     

Level of public transport service evaluation: A fuzzy set approach

The success of any enterprise, in a market-oriented economy, depends upon it's quality. This paper describes the results of a survey of commuters on the quality of services and their relative weights, and of the attributes that determine the service level of bus transport undertakings. The model uses the theory of fuzzy sets to process the information obtained. A composite index, called level-of-public transport-service (LOPTS), is defined and used to measure the service qualities. This approach is presented with guidelines for rating the quality of services, fuzzy-set representations of the linguistic grades, definition of LOPTS and its use in a public transport quality data base. An example is presents how the approach can be employed to analyse data bases generated from a quality survey. This approach is compared with the numerical rating approach with single number representation.     

Ultimate collapse tests of stiffened-plate ship structural units

An increasingly popular approximate method for assessing ship hull girder ultimate strength is to combine the individual elasto-plastic load-carrying characteristics of each single stiffened-plate unit comprising the ship hull cross section. In order to evaluate methods (numerical and experimental) for developing the load-carrying characteristics (load–shortening curves), a full-scale testing system was designed and constructed to provide data for stiffened steel plate units under combined axial and lateral loads. The system included an assembly of discrete plate edge restraints that were developed to represent symmetric boundary conditions within a grillage system. Twelve full-scale panels including ‘as-built’, ‘deformed’ and ‘damaged’ specimens were tested in this set-up.

The specimens failed by combined plate and flexural buckling, stiffener tripping or local collapse, depending on the magnitude of lateral loads and local damage. Load-shortening curves associated with different failure modes were found to be distinctly different and it was found that a small lateral load could change the failure mode from flexural buckling to tripping. Current design criteria should directly consider effects of the lateral loads on the failure modes and the collapse loads of stiffened plates.     

An operational tanker scheduling optimization system: model implementation, results and possible extensions

In a previous article by the same authors, we described the operational, short term tanker scheduling problem, focusing on the Chevron Shipping Company case study. We developed a model for the scheduling situation and described an integer programming formulation for schedule optimization. In this paper, we describe the scheduling system implementation on the University of Michigan IBM 3090-600E computer. The system generates feasible schedules for each vessel and then uses integer programming to attempt to solve for the optimal overall schedule. Use of the system and the potential for cost savings is demonstrated with a realistic scheduling situation based on Chevron Shipping Company information.     

Beta comparisons across industries—a Water transportation industry perspective

This paper undertakes a comparative analysis of the stock market perception of risk in US listed water transportation companies and seven other main sectors, air transportation; rail transportation; trucks; electricity; gas; petroleum refining; and real estate over the period July 1984-June 1995. This is done by employing the Capital Asset Pricing Model (CAPM) to model the stock returns of each industry and hence compare their betas (systematic risk). Multiequation Regression Models are used for estimation. The findings suggest that the water transportation industry exhibits significantly lower market risk than the average stock and the rail transportation industry, significantly higher systematic risk than the real estate industry, while its systematic risk is insignificantly different from the rest of the industries. These results are useful to investors basing their decisions on relative market exposures to risk in different industries.     

Carbon flux in ice–ocean–plankton systems of the Bellingshausen Sea during a period of ice retreat

Most analyses of marine microbial systems in the seasonally ice covered areas of the Southern Ocean have been based on data from the major embayment areas of the Ross and Weddell Seas. In this study data were collected at stations covering a range of regimes from full ice cover through to open water in the Bellingshausen Sea. A major feature of the production system was a rapid retreat of the ice-edge, which uncoupled the marginal ice zone from a phytoplankton bloom which remained associated with a frontal system. This bloom was maintained, and probably initiated, in an unusual environment generated by the interaction between the marginal ice zone and the front. Size-based analyses of the microbial system were derived for ice-covered, recently ice-covered and open water sites. Estimates of standing stocks and key rate processes were combined to produce a single food web network for each station. The under-ice system was one of low production and low recycling but apparently high retention. As the ice retreated the microbial systems to the north began to develop, but these were constrained by grazing pressure. The bloom in the area appeared to be sustained even though estimated losses were far higher than production, although the high sedimentation losses expected were not observed. The carbon flow networks are discussed in relation to the environmental changes and the interaction of the marginal ice zone and the frontal system appears crucial to the phytoplankton. Microzooplankton grazing is implicated as a major controlling factor. The local microbial dynamics are strongly influenced by material which was produced at an earlier time and somewhere else in the Southern Ocean.     

Recent trends in ship conversion: an overview

A survey of more than 250 ship conversions between 1980 and 1990 is presented. Conversions are defined as jumboizations of hulls, changes of missions of ship with or without major structural changes, and major reconstruction of cruise liners and passenger ferries. From reports publishd in maritime journals, a database has been established, allowing for analysis of various ratios, principal particulars, and mission changes. Whenever available, evolution of conversion cost and duration over time as well as age, country of build, and converting shipyard are considered. Conclusions are drawn from comparisons of our database with the world fleet. Finally trends in the ship conversion market are discussed.